Airlink AGSW808POE Quick Installation Guide
Airlink AGSW808POE Manual
 |
View all Airlink AGSW808POE manuals
Add to My Manuals
Save this manual to your list of manuals |
Airlink AGSW808POE manual content summary:
- Airlink AGSW808POE | Quick Installation Guide - Page 1
Quick Installation Guide 8-Port 10/100/1000Mbps Switch with 8-Port PoE Model# AGSW808POE Ver. 1A - Airlink AGSW808POE | Quick Installation Guide - Page 2
use cross-over cables or an up-link port • Flow control fully supported: - Half-duplex: backpressure flow control - Full-duplex: IEEE802.3x flow This Quick Installation Guide tells you how to install your Switch and how to connect it to your Ethernet network. Terms/Usage In this manual, the term " - Airlink AGSW808POE | Quick Installation Guide - Page 3
1.1 Package Contents • 1 x AGSW808POE • 1 x Switching Power Adapter • 1 x Quick Installation Guide • 4 x Rubber foot for shock cushioning 1.2 and can operate in half and full-duplex transfer modes. These ports also support automatic MDI/MDIX crossover detection, which give the PoE switch "plug and - Airlink AGSW808POE | Quick Installation Guide - Page 4
backup DC power, DC 48V/1.5A 1.2.3 LED indicators information The front panel LEDs provide instant status feedback for help with monitoring and troubleshooting when needed. • Power: Power Indicator LED Power Color Green Solid The Switch is power-on Status Blinking N/A Off No power 3 - Airlink AGSW808POE | Quick Installation Guide - Page 5
• PoE 1~8 LEDs LED Color PoE 1~8 Green Solid PoE devices connected successfully Status Off PoE port failed, possibly due to: power shortage, over the power adapter output current • LAN 1~8 LEDs LED LAN 1~8 100TX LAN 1~8 1000TX Color Green Green Solid Connected to 100M network Connected to - Airlink AGSW808POE | Quick Installation Guide - Page 6
1.3 Technical Specifications Standards • IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX and IEEE 802.3af (PoE) Ports • 8 x 10/100/1000Mbps Auto-Negotiation RJ45 Port with 8 PoE ports Access Method • CSMA/CD Transmission Method • Store and Forward Topology • Star SRAM Buffers • Embedded SRAM for packet - Airlink AGSW808POE | Quick Installation Guide - Page 7
• Humidity: 5% ~ 90% RH, non-condensing 2. Installing the Switch The site where you place the switch may greatly affect its performance. When installing, take the following into your consideration. 2.1 Installation The setup of the switch can be performed using the following steps: • Visually - Airlink AGSW808POE | Quick Installation Guide - Page 8
will not offer power to this device. This feature allows users to freely and safely mix legacy and PoE devices on their network. The Switch supports 10Mbps Ethernet, 100Mbps Fast Ethernet and 1000Mbps Giga Ethernet; and it runs both in half and full duplex mode using two pair of Category 5 cable - Airlink AGSW808POE | Quick Installation Guide - Page 9
Technical Support E-mail: [email protected] Web Site: www.airlink101.com *Network conditions and environmental service marks are, unless noted otherwise, the trademarks and service marks of AirLink101®. All other product or service names are the property of their respective holders. AirLink101
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
 |
 |
Quick Installation Guide
8-Port 10/100/1000Mbps Switch
with 8-Port PoE
Model# AGSW808POE
Ver. 1A