Airlink AIC1620W User Manual
Airlink AIC1620W Manual
 |
View all Airlink AIC1620W manuals
Add to My Manuals
Save this manual to your list of manuals |
Airlink AIC1620W manual content summary:
- Airlink AIC1620W | User Manual - Page 1
SkyIPCam1620W Wireless N MPEG4 3GPP Network Camera Model # AIC1620W User's Manual Ver. 1.0 - Airlink AIC1620W | User Manual - Page 2
the System ...62 5.7 Event Configuration ...63 5.8 Changing System Language 66 5.9 Terminating Operation...67 CHAPTER 6 ...68 APPENDIX ...68 A.1 Specification ...68 A.2 GPIO Terminal Application...69 A.3 Bandwidth Reference Guide 70 A.4 Glossary of Terms ...71 TECHNICAL SUPPORT...75 - 1 - - Airlink AIC1620W | User Manual - Page 3
the package carefully. You should have the following: One SkyIPCam1620W Wireless N MPEG4 3GPP Network Camera One 2dBi Dipole Antenna One AC & RS485 Adapter One Ethernet Cable (Cat.5) One Setup CD One Quick Installation Guide NOTE Once any item contained is damaged or missing, contact the store where - Airlink AIC1620W | User Manual - Page 4
held for five seconds, the camera will restore the factory default settings. Antenna Connector Ethernet Cable Connector connects the network cable, which supports the NWay protocol so that the camera can detect the network speed automatically. Audio I/O Connectors: Audio Out connects an external - Airlink AIC1620W | User Manual - Page 5
and control it from any desktop/notebook computer or mobile phone over the Intranet or Internet. The simple installation procedures and Wireless N technology which provides higher bandwidth and faster transmission speed as well as great flexibility of installation. With comprehensive applications supported - Airlink AIC1620W | User Manual - Page 6
-TX Fast Ethernet; Auto-MDIX Compatible with IEEE 802.11b/g/n networks, data rate up to 150Mbps* Accessing the Camera using Web Browser - Supported Browsers: Microsoft® Internet Explorer 6.0 or above; Apple Safari and Mozilla Firefox with JAVA plug-in for MJPEG and QuickTime plug-in for MPEG4 - Airlink AIC1620W | User Manual - Page 7
1.5 Applications of the Camera The SkyIPCam1620W can be applied in multiple applications indoor, including: Monitor local and remote places and objects via Internet or Intranet. Capture still images and video clips remotely. Upload images or send email messages with the still images attached. The - Airlink AIC1620W | User Manual - Page 8
IP Camera and connect the other end to one of the LAN ports on your router or switch. NOTE You need to connect the camera to the local area network first in order to configure the wireless settings. After the setup finished, you will be able to disconnect the network cable Step - Airlink AIC1620W | User Manual - Page 9
Step 5 Please verify the LED status on the front panel and make sure it is on and ready for use now. • Power LED: Solid Amber • Link LED: Flashing Green Step 6 Please proceed to Chapter 3 for camera configuration. - 8 - - Airlink AIC1620W | User Manual - Page 10
CHAPTER 3 CAMERA CONFIGURATION 3.1 Setting up Your Camera Step 1 Insert the provided CD into your computer's CD ROM drive. Step 2 Click on Install Utility and Software when the autorun menu pops up on the screen. Note: If you do not see the autorun menu pops up on the screen, please go to your CD- - Airlink AIC1620W | User Manual - Page 11
Step 3 Click Install to install the utility. Step 4 Click Finish when installation finishes. - 10 - - Airlink AIC1620W | User Manual - Page 12
Step 5 Open SkyIPCam Utility by double clicking on its icon on your desktop. or clicking Start, then go to (All) Programs > Airlink101 SkyIPCam UltraView > SkyIPCam Utility. Step 6 Click on Search to find the camera on your network. Select the Camera you wish to configure and click on - Airlink AIC1620W | User Manual - Page 13
Step 7 When you are prompted for the username and password, enter "admin" for both Username and Password, and click OK. Step 8 The camera viewing window will appear. Click on Setup, then click on Smart Wizard. 1 2 - 12 - - Airlink AIC1620W | User Manual - Page 14
Step 9 Enter a name for your camera and a location (i.e. Room 1). Create a password and enter it to Admin Password and Confirm Password. This will change the admin password of the camera. It is recommended to modify the admin's password to protect your privacy. Click Next. Step 10 You can specify a - Airlink AIC1620W | User Manual - Page 15
your Internet Service Provider. You can set this up at a later time. Click Next. Step 12 Enter the Network ID (SSID) of your wireless network, or your wireless network. This information is stored in your wireless AP/router. Click Next. Note You may contact the manufacturer of your wireless router/AP - Airlink AIC1620W | User Manual - Page 16
is restarted, you can unplug the network cable from it. It will take around 1 or 2 minutes for the camera connecting to the wireless router/AP. To make sure the wireless connection is successfully established, open the SkyIPCam Utility and click on Search. If the camera shows up in the list, it is - Airlink AIC1620W | User Manual - Page 17
3.2 Viewing Image via Your Camera Method A > Access Camera from SkyIPCam Utility Step 1A Open Airlink101 SkyIPCam Utility, select the camera you wish to connect to and click on Link button. Go to Step 3. Method B > Access Camera from Web Browser Step - Airlink AIC1620W | User Manual - Page 18
Step 3 Enter administrator's username and password of the camera, then click OK. The default username and password are both "admin" if you did not make any change to it at Step 9, Section 3.1. Step 4 Internet Explorer User: If this is the first time for your computer to view image from the web - Airlink AIC1620W | User Manual - Page 19
Note If you are using Mozilla Firefox or Safari and you are not able to view any image, please make sure you have Java and Quick Time add-ons installed. - 18 - - Airlink AIC1620W | User Manual - Page 20
access and manage the camera through the Web browser and the provided software application SkyIPCam UltraView. This chapter describes the Web Configuration, and guides you through the configuration of the camera by using the web browser. To open the Web Configuration page, please refer to Chapter - Airlink AIC1620W | User Manual - Page 21
the NTP Server. You need to enter the IP address of the server and select the update interval in the following two boxes. - Manual: Select this option to set the date and time manually. Basic >> User Administrator You can use this option to change the password for your camera General User - 20 - - Airlink AIC1620W | User Manual - Page 22
- User Name: Enter the user's name you want to add to use the camera. - Password: Enter the password for the new user. When you are finished, click Add/Modify to add the new user to the camera. To modify the user's information, select the one you want to modify from UserList and click Add/Modify. - - Airlink AIC1620W | User Manual - Page 23
. Enter your DSL account's User Name and Password given by your DSL service provider. The camera will get an IP address from the ISP as starting up. If you are using a router, do NOT select this option. NOTE Once the camera gets an IP address from the ISP as starting up, it - Airlink AIC1620W | User Manual - Page 24
, it supports port auto mapping function so that you can access the camera if it is behind a NAT router or firewall . Select the Enable option to enable this feature. Ports Number - HTTP Port: The default HTTP port is 80. Some ISP's have port 80 blocked. If you are having problems - Airlink AIC1620W | User Manual - Page 25
Network >> IP Filter The IP Filter setting allows the administrator of the camera to limit the users within a certain range of IP addresses to access the camera. Disable: Select this option to disable the IP Filter function of the camera. Accept - Start/End IP Address: Assign a range of IP addresses - Airlink AIC1620W | User Manual - Page 26
Setting The camera supports Wireless feature that can connect to your wireless network. Select the Enable option to enable this feature. have access to network authentication servers. The user has to manually enter the starting password in their access point or gateway, as well as in each PC on - Airlink AIC1620W | User Manual - Page 27
: 64 bits or 128 bits. - WEP Key 1/2/3/4: Enter the WEP key(s) in the following boxes. This must match the WEP key value configured for your wireless router/AP. If you select WPA-PSK or WPA2-PSK as the Authentication mode, you need to complete the following settings: - Encryption: Select TKIP or AES - Airlink AIC1620W | User Manual - Page 28
WPS (WiFi Protected Setup™) feature that allows your camera to connect to the wireless network easily and safely without manually configuring the wireless security settings. Please note that Your AP/Router must support WPS feature as well. If you are not sure, please refer to the manufacturer - Airlink AIC1620W | User Manual - Page 29
4.3 Setting up Video & Audio The Video & Audio menu contains three sub-menus that provide the video and audio settings for the camera. Video & Audio >> Camera Image Setting - Brightness: Adjust the brightness level from 0 ~ 100. - Contrast: Adjust the contrast level from 0 ~ 100. - Saturation: - Airlink AIC1620W | User Manual - Page 30
or a proper setting depending on your network status. NOTE The camera supports both MPEG4 and MJPEG compression. MJPEG capture the images in JPEG format, Guide. 3GPP - Disable: Disable access from 3G mobile device. - 3GPP Without Audio: Select this option to view the camera from your mobile device - Airlink AIC1620W | User Manual - Page 31
by entering the RTSP link: rtsp://(IP address of the camera)/3gp. NOTE Your mobile phone and the service provider must have data service. Please contact your service provider when you are failed to use this service. Video & Audio >> Audio Camera Microphone In Select the Enable option to enable the - Airlink AIC1620W | User Manual - Page 32
This option allows you to set the text overlay function of the camera, so that you can see the related information on the live view image. - Includes Date & Time: Check this option to display the date & time stamp on the live view image. - Include Text: Check this option and enter the text (i.e. - Airlink AIC1620W | User Manual - Page 33
the destination folder for uploading the images. For example, /Test/. - Passive Mode: Check the Enable box to enable passive mode. If you are having trouble, you can enable/disable this mode. - FTP Upload with: Select upload to FTP with One Snapshot image or a series image in Pre- event/Post-event - Airlink AIC1620W | User Manual - Page 34
Event Server Setting >> Email Email - SMTP Server Address: Enter the mail server address. For example, mymail.com. - Sender Email Address: Enter the email address of the user who will send the email. For example, [email protected]. - Sender User Name: Enter the user name to login the mail server. - - Airlink AIC1620W | User Manual - Page 35
Event Server Setting >> NAS Network Storage - Samba Server Address: Enter the IP address of the Network Storage server. - Share: Assign the folder on the Network Storage server to share the files to users. - Path: Assign the path for uploading the files on the Network Storage server. For example, / - Airlink AIC1620W | User Manual - Page 36
4.5 Motion Detect *This function can only be configured in Windows Internet Explorer. The Motion Detect menu contains the command and option that allow you to enable and set up the motion detection feature of the camera. The camera provides two detecting areas. To enable the detecting area, select - Airlink AIC1620W | User Manual - Page 37
4.6 Event Config The Event Configuration menu contains five sub-menus that provide the commands to configure event profiles. Event Configuration >> General Setting - Snapshot/Recording Subfolder: You can assign a given sub-folder for captured file. Otherwise, leave this option blank to use the - Airlink AIC1620W | User Manual - Page 38
Event Configuration >> Schedule Profile This sub-menu displays the scheduled profile(s). To configure a new profile, click Add and then enter a descriptive name for the profile in the prompt dialog window. After entering the profile name, click OK and the profile is added to the Schedule Profiles - Airlink AIC1620W | User Manual - Page 39
Event Configuration >> Schedule Trigger You can configure the schedule for trigger function of the camera individually by Email, FTP, and NAS. Select the Enable option on each item, and then select a Schedule Profile from the pull-down list and set the Interval time. Event Configuration >> GPIO - Airlink AIC1620W | User Manual - Page 40
- Schedule Profile: Select a schedule profile from the pull-down list. - Action: Set the Trigger Out function or select the destination that the captured images will be sent to: Record to Network Storage, Send Email, or FTP Upload. - 39 - - Airlink AIC1620W | User Manual - Page 41
4.7 Tools The Tools menu provides the commands that allow you to restart or reset the camera. You can also backup and restore your configuration, and upgrade the firmware for the camera. Factory Reset Click Reset to restore all factory default settings for the camera. System Reboot Click Reboot to - Airlink AIC1620W | User Manual - Page 42
control buttons on the live view screen (as shown on the next page). Custom Protocol Setting: Select this option to configure the commands protocol manually. You can click Test to test each command that you have assigned. In the Name and Command string boxes, you can customize more buttons - Airlink AIC1620W | User Manual - Page 43
About the Control Buttons After enabling RS-485 function, the control panel will appear on the Live View window. Control Buttons of RS-485 - Left/Right/Up/Down/Home buttons allow you to move the camera lens position. Clicking the Home (center) button will move the camera lens to the assigned home - Airlink AIC1620W | User Manual - Page 44
4.9 Information The Information menu displays the current configuration and events log of the camera. Information >> Device Info Display the Basic, Video & Audio, and Network settings of the camera. Information >> System Log The Logs table displays the events log recorded by the system. - 43 - - Airlink AIC1620W | User Manual - Page 45
CHAPTER 5 USING SKYIPCAM ULTRAVIEW 5.1 Starting the Program To start UltraView Pro, click Start (All) Programs Airlink101 SkyIPCam UltraView SkyIPCam UltraView. Alternately, you can start the program by simply double-clicking the program icon on the desktop of your computer. On the - Airlink AIC1620W | User Manual - Page 46
5.2 Main Window and Item Feature When you start and login to UltraView, the Main window will display as below: The Main window provides you with the information on operating the system, as well as the control panel such as the Quick Launch buttons, and so on. NOTE UltraView Pro requires the - Airlink AIC1620W | User Manual - Page 47
in 17-camera view mode using a split window. The first camera is displayed as the major view. Display the connected camera(s) in N x N grid view mode, supporting up to 36 views (up to 32 cameras). Display the live view of the selected camera in full screen mode. Automatically switch the live view - Airlink AIC1620W | User Manual - Page 48
allow you to move the camera lens position. Clicking the Home (center) button will move the camera lens to the assigned home position. **AIC1620W does not support Pan/Tilt function. The Patrol/Stop buttons are used to enable/disable the swinging function of the camera. Click Patrol to start - Airlink AIC1620W | User Manual - Page 49
5.3 Accessing the Camera Before you can access the camera, you have to add the camera to the system. Adding a Camera 1. Click the button and select Device Setting to display the Device Setting window. 2. Click New. 3. Click Device Search to search the camera(s) within your network. - 48 - - Airlink AIC1620W | User Manual - Page 50
accessing the camera. The password for accessing the camera will not be displayed. Select the stream type as MPEG4, MJPEG, or H.264. (H.264 is not supported by AIC1620W) Select Yes or No to set up recording function of the camera. This window allows you to preview the image of the - 49 - - Airlink AIC1620W | User Manual - Page 51
Window camera. Click Preview to view the image; click Disconnect to stop previewing. TIP You cannot set the motion detection area while adding the new camera. To set the motion detection area of the camera, select the desired camera and click the Modify button on the Device Setting window. See the - Airlink AIC1620W | User Manual - Page 52
Editing / Deleting a Camera Since you have added camera(s) to the system, you can select one to edit or remove. 1. On the Device Setting window, the connected camera(s) will be displayed in the Device List. 2. To delete the camera: select the desired one and then click Remove. When prompted, click - Airlink AIC1620W | User Manual - Page 53
Viewing Image of the Camera Since you have added camera(s) to the system, the image of the selected camera(s) will be displayed on the Live View Window automatically. You can view a maximum of 32 cameras simultaneously. Additionally, you can select one-camera or other view mode to display the video - Airlink AIC1620W | User Manual - Page 54
5.4 Recording / Playing Video Enabling / Disabling Recording Press Preview to activate the settings. While you are adding/editing the camera, you can enable the recording function for the camera by selecting the Record option. Click Save after you finish setting. Alternately, you can set all cameras - Airlink AIC1620W | User Manual - Page 55
Configuring the Recording Settings The default directory for saving the recorded video files is "C:\". You can change the target folder for saving the files in the Record Setting option. 1. Click the button and then select Record Setting. 2. To assign the target folder for saving the recorded files, - Airlink AIC1620W | User Manual - Page 56
Click the button to display the Schedule Configuration window, which allows you to configure the recording schedule. 1. Click New, and then enter the Schedule Title. 2. Select the checkboxes below the Schedule Title to set the time to record video. One checkbox stands for 30 minutes of recording - Airlink AIC1620W | User Manual - Page 57
Playback the Recording Files NOTE Divx/Xvid codec is required for the system to play the video files. If the video clips cannot be displayed in the Playback window normally, click the following path to download and install the required component: http://download.divx.com/divx/DivXInstaller.exe 1. - Airlink AIC1620W | User Manual - Page 58
5.5 Configuring the eMap View Setting Click the button and select View Setting to configure the camera view setting of eMap mode. eMap refers to the geography and device scope of the UltraView Pro, which visually presents the devices in your security system. It uses a background of the area (e.g. a - Airlink AIC1620W | User Manual - Page 59
Click Save after you complete the settings. 4. On the following window, you can assign the camera position in the eMap. Click the Camera Location button to display the Edit window. Select the camera from the Camera List, and then click the mouse on the desired position of the map. The camera icon - Airlink AIC1620W | User Manual - Page 60
5. When completed, click Save. Click Back to go back to the Main window. 6. To view from eMap: a. Click the button and select eMap View. - 59 - - Airlink AIC1620W | User Manual - Page 61
b. Select the map from the eMap Name list. c. Click the camera icon, the camera window will then pop up to display the image on the spot. - 60 - - Airlink AIC1620W | User Manual - Page 62
Editing / Deleting the eMap 1. Click the button and select View Setting. 2. To edit the eMap: In the eMap List, select the desired map and click Modify. The map's information will be displayed, where you can change the map's information and then click Save when completed. 3. To delete the eMap: - Airlink AIC1620W | User Manual - Page 63
5.6 Configuring the System User Management Click the software. button and select Account to change the administrator password for the UltraView Enter the Current password, and then enter the new password twice (in the Type new password and Retype password boxes). When completed, click Save. - - Airlink AIC1620W | User Manual - Page 64
5.7 Event Configuration Configuring Event Trigger Click the button and select Event Trigger to configure the trigger out function of the camera. 1. On the Event Trigger window, select the desired camera from the Camera List. 2. Do one of the following: SMTP: Select this option and enter the - Airlink AIC1620W | User Manual - Page 65
that you can send emails that include still images as notification. Select the Enable SMTP option to start the email service of the system. When you enable the service, you have to complete the following settings. SMTP Server Address: Enter the mail server address. For example, mymail.com. Sender - Airlink AIC1620W | User Manual - Page 66
Sending Email Notification Click the button and select Address Book to assign the user to the Address Book of the camera. The user will receive a real-time notification from the system while triggering out. 1. On the Address Book window, click New. 2. In the Address Book Information field, enter - Airlink AIC1620W | User Manual - Page 67
5.8 Changing System Language Click the button and select language to change the displayed system language. On the Language screen, select the preferred language (English, Traditional Chinese, or Simplified Chinese) and click Save. - 66 - - Airlink AIC1620W | User Manual - Page 68
5.9 Terminating Operation When you have finished operating, click the Close to exit the program. button and select Logout to logout the system or - 67 - - Airlink AIC1620W | User Manual - Page 69
.3u 10/100Mbps Fast Ethernet • IEEE802.11b / g / n, data rate of up to 150Mbps* • Supported Protocols: TCP/IP, UDP, ICMP,DHCP,NTP,DNS,DDNS,SMTP,FTP ,HTTP, Samba, PPPoE, UPnP, RTP,RTSP,RTCP Wireless Security • WPA2/WPA-PSK • WEP 64/128-bit Multi-Profile • 3 profiles streaming simultaneous Antenna - Airlink AIC1620W | User Manual - Page 70
A.2 GPIO Terminal Application Typically used in association with programming scripts for developing applications for motion detection, event triggering, alarm notification via e-mail, and a variety of external control functions. The 6-pin I/O Terminal Block is located on the rear panel and provides - Airlink AIC1620W | User Manual - Page 71
A.3 Bandwidth Reference Guide MPEG4 Resolution QQVGA QVGA VGA Frame rate (fps) 30 30 30 Lowest 128 128 128 Bit rate (Kbit/s) Low Normal High 128 128 128 128 - Airlink AIC1620W | User Manual - Page 72
IP address can even change while it is still connected. It also supports a mix of static and dynamic IP addresses. This simplifies the task without the hassle of manually assigning it a unique IP address. DHCP allows the specification for the service provided by a router, gateway, or other network - Airlink AIC1620W | User Manual - Page 73
the numerical addressing format used to route the information. Your Internet service provider controls the IP address of any device it connects to the In smaller LANs, most people will allow the DHCP function of a router or gateway to assign the IP addresses on internal networks. IP address is - Airlink AIC1620W | User Manual - Page 74
mobile telephones. Network Address Translator generally applied by a router problem. When devices within your network request information from the Internet, the requests are forwarded to the Internet under the router reply. It is primarily used to troubleshoot Internet connections. Point-to-Point - Airlink AIC1620W | User Manual - Page 75
Subnet mask T (TCP/IP) Transceiver U UDP User Name Utility UTP network protocol. RJ-45 connector is used for Ethernet cable connections. A router is the network software or hardware entity charged with routing packets between networks. RTP (Real-time Transport Protocol) is a data transfer protocol - Airlink AIC1620W | User Manual - Page 76
-746-3238 Web Site: www.airlink101.com * AIC1620W supports most of the mobile devices, but compatibility with every mobile device is not guaranteed. ** Monitoring multiple cameras simultaneously demands high performance computer system. *** Theoretical maximum wireless signal rate derived from IEEE
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
 |
 |
SkyIPCam1620W
Wireless N MPEG4 3GPP Network Camera
Model # AIC1620W
User’s Manual
Ver. 1.0