Airlink AICN1500W User Manual

Airlink AICN1500W Manual

Get Airlink AICN1500W PDF manuals and user guides View all Airlink AICN1500W manuals
Add to My Manuals
Save this manual to your list of manuals

Airlink AICN1500W manual content summary:

  • Airlink AICN1500W | User Manual - Page 1
    SkyIPCam1500W Wireless N Night Vision Network Camera Model # AICN1500W User's Manual Ver. 1.0
  • Airlink AICN1500W | User Manual - Page 2
    ...5 2.2 Connecting the Camera to LAN/WLAN 5 2.3 Applications of the Camera ...6 CHAPTER 3 ...7 SkyIPCam Utility and Ultraview 7 3.2 Configuring the Camera ...10 3.3 Viewing Images...15 CHAPTER 4 ...17 Window and Item Feature 38 5.3 Accessing the Camera ...41 5.4 Recording / Playing Video ...48
  • Airlink AICN1500W | User Manual - Page 3
    the package carefully. You should have the following: One SkyIPCam1500W Wireless N Night Vision Network Camera. One Antenna. One AC Power Adapter. One Camera Stand. One Ethernet Cable (Cat.5). One Installation CD-ROM. One Quick Installation Guide. NOTE Once any item contained is damaged or missing
  • Airlink AICN1500W | User Manual - Page 4
    External Antenna Screw Hole is used to connect the camera stand. WPS button is used to connect to router/AP wirelessly. DC Power Connector is used to connect the power adapter, in order to supply power to the camera. Reset Button will restart the camera when it is pressed quickly; when it is long
  • Airlink AICN1500W | User Manual - Page 5
    Supported By using a standard Web browser or the bundled SkyIPCam View software application, the administrator can easily change the configuration of the camera via Intranet or Internet. In addition, the camera . WLAN: 802.11b/g Wireless LAN Accessing the Camera using Web Browser Platform:
  • Airlink AICN1500W | User Manual - Page 6
    ball screw head to lock to the camera's screw hole. When the camera stand is attached, you can place the camera anywhere by mounting the camera through the three screw holes located in the base of the camera stand. The Camera Stand 2.2 Connecting the Camera to LAN/WLAN Use the provided Ethernet
  • Airlink AICN1500W | User Manual - Page 7
    security encryption disabled. Connecting the Antenna NOTE If the camera cannot connect to your wireless network, you need to connect the camera to LAN first and proceed with WLAN settings. 2.3 Applications of the Camera The camera can be applied in multiple applications, including: Monitor local
  • Airlink AICN1500W | User Manual - Page 8
    INSTALLATION 3.1 Installing SkyIPCam Utility and UltraView Step 1 Insert the provided CD into your computer's CD ROM drive. Step 2 Click on Install Utility and Software. Note: If you do not see the autorun menu pops up on the screen, please go to your CD-ROM drive > UltraView folder > run "Setup
  • Airlink AICN1500W | User Manual - Page 9
    Windows 7 and Vista users: an AutoPlay window pops up on screen, please make sure you give permission to run the setup program by clicking Autorun.exe. Step 3 Click Install to install the SkyIPCam utility and UltraView. - 8 -
  • Airlink AICN1500W | User Manual - Page 10
    Step 4 Click Finish when installation finishes. - 9 -
  • Airlink AICN1500W | User Manual - Page 11
    (All) Programs > Airlink101 SkyIPCam UltraView > SkyIPCam Utiliy Step 2 Click on Search to find the camera on your network. Select the Camera you wish to configure and click on Link. Note If the Camera you wish to configure does not show up in the utility, make sure the camera is properly connected
  • Airlink AICN1500W | User Manual - Page 12
    Step 3 When you are prompted for the user name and password, enter "admin" for both User name and Password, and click OK. Step 4 The camera viewing window will appear. Click on Setup, then click on Smart Wizard. - 11 -
  • Airlink AICN1500W | User Manual - Page 13
    accept the suggested default setting DHCP if your router's DHCP server is enabled, so the router will automatically assign a dynamic IP address to your camera. Another option is to select Static IP, you can manually change the last 3-digit number of the IP Address, in case that the suggested one has
  • Airlink AICN1500W | User Manual - Page 14
    the future, enter your email information here. You can get this information from your Email Service Provider. You can also set this up at a later time. Click Next. Step 8 Enter the Network ID (SSID) of your wireless network, or click on Site Survey and select from the list. Select the Authentication
  • Airlink AICN1500W | User Manual - Page 15
    the network cable from it. It will take around 1 or 2 minutes for the camera to connect wirelessly to your wireless router/AP. To make sure the wireless connection is successfully established, open the SkyIPCam Utility and click on Search. If the camera shows up in the list, it is connected to your
  • Airlink AICN1500W | User Manual - Page 16
    Images Method A > Access Camera from SkyIPCam Utility Step 1A Open Airlink101 SkyIPCam Utility, select the camera you wish to connect to and click on Link button. Go to Step 3. Method B > Access Camera from Web Browser Step 1B If you assigned a static IP address for your camera (at Step 6, Chapter
  • Airlink AICN1500W | User Manual - Page 17
    Step 3 Enter administrator's user name and password of the camera, then click OK. The default user name and password are both "admin" if you did not make any change to it at Step 5, Chapter 3.2. Step 4
  • Airlink AICN1500W | User Manual - Page 18
    image, please make sure you have Java and Quick Time add-ons installed. Step 6 To get a clear view of images, you can simply rotate the camera's lens clockwise or counterclockwise to adjust the focus. - 17 -
  • Airlink AICN1500W | User Manual - Page 19
    You can access and manage the camera through the Web browser and the provided software application SkyIPCam UltraView. This chapter describes the Web Configuration, and guides you through the configuration of the camera by using the web browser. To configure the camera, click Setup on the main page
  • Airlink AICN1500W | User Manual - Page 20
    PC: Select this option and the date & time settings of the camera will be synchronized with the connected computer. - Synchronize with NTP Server: to select the proper IP address of the server and the update interval from the pulldown menu in the following two boxes. - Manual: Select this option to
  • Airlink AICN1500W | User Manual - Page 21
    modify the user's information, select the one you want to modify from UserList and click Add/Modify. - UserList: Display the existing users of the camera. To delete a user, select the one you want to delete and click Delete. Guest - User Name: Enter the guest's name you want to add to
  • Airlink AICN1500W | User Manual - Page 22
    menu contains three sub-menus that provide the network settings for the camera, such as the IP Setting, DDNS Setting, IP Filter, and Wireless Network. Network >> Network IP Setting This item allows you to select the IP address mode and set up the related configuration. - DHCP: The default setting
  • Airlink AICN1500W | User Manual - Page 23
    note that you have to sign up for DDNS service with the service provider first. DDNS function on the camera is ONLY used if you are NOT using a NAT router and your camera has a public IP address. If you ARE using the camera with a NAT router, the camera's DDNS function will not work, and you will
  • Airlink AICN1500W | User Manual - Page 24
    to limit the users within a certain range of IP addresses to access the camera. Start/End IP Address Assign a range of IP addresses that are not allowed to access the camera by entering the Start IP address and End IP address. When you are finished, click Add to save the range setting. You can
  • Airlink AICN1500W | User Manual - Page 25
    the Enable option to enable this feature. The camera supports Wireless feature that can connect to your wireless network. Select the Enable option to enable this feature. Network ID (SSID): Keep the default setting of this option to connect the camera to any access point under the infrastructure
  • Airlink AICN1500W | User Manual - Page 26
    to enable the data encryption feature to secure the camera within the wireless network. - Format: Once you enable the Encryption key(s) in the following boxes. This must match the WEP key value configured for your wireless router/AP. If you select WPA-PSK or WPA2-PSK as the Authentication mode, you
  • Airlink AICN1500W | User Manual - Page 27
    WPS (WiFi Protected Setup™) feature that allows your camera to connect to the wireless network easily and safely without manually configuring the wireless security settings. Please note that Your AP/Router must support WPS feature as well. If you are not sure, please refer to the manufacturer
  • Airlink AICN1500W | User Manual - Page 28
    up Video & Audio The Video & Audio menu contains three sub-menus that provide the video and audio settings for the camera. Video & Audio >> Camera Image Setting - Brightness: Adjust the brightness level from 0 ~ 100. - Contrast: Adjust the contrast level from 0 ~ 100. - Saturation: Adjust the colors
  • Airlink AICN1500W | User Manual - Page 29
    levels: Lowest, Low, Medium, High, and Highest. - Frame Rate: Select Auto or a proper setting depending on your network status. Video & Audio >> Audio Camera Microphone In Select the Enable option to enable the camera's audio function, so that you can receive the on-site sound and voice from the
  • Airlink AICN1500W | User Manual - Page 30
    related configuration is correct or not. Once the camera connects to the server successfully, click Apply. Event Server Setting>> FTP FTP - Host Address: Enter the IP address or domain name of the target FTP to enable passive mode. If you are having trouble, you can enable/disable this mode. - 29 -
  • Airlink AICN1500W | User Manual - Page 31
    Event Server Setting >> Email Email - SMTP Server Address: Enter the mail server address. For example, mymail.com. - Sender Email Address: Enter the email address of the user who will send the email. For example, [email protected]. - Sender User Name: Enter the user name to login the mail server. -
  • Airlink AICN1500W | User Manual - Page 32
    Explorer. The Motion Detect menu contains the command and option that allow you to enable and set up the motion detection feature of the camera. The camera provides two detecting areas. To enable the detecting area, select Window 1 or 2 from the pull-down list, and then check Enable. When the
  • Airlink AICN1500W | User Manual - Page 33
    4.7 Event Configuration The Event Config menu contains five sub-menus that provide the commands to configure event profiles. Event Configuration >> General Setting - Snapshot/Recording Subfolder: You can assign a descriptive name for the subfolder to save the captured image/video files. Otherwise,
  • Airlink AICN1500W | User Manual - Page 34
    Event Configuration >> Arrange Schedule Profile This sub-menu displays the scheduled profile(s). To customize the profile, click Add and then enter a descriptive name for the profile in the prompt dialog window. After entering the profile name, click OK and the profile is added to the Schedule
  • Airlink AICN1500W | User Manual - Page 35
    of the captured images: Send Email, or FTP Upload. Event Configuration >> Schedule Trigger You can separately configure the schedule for trigger function of the camera by Email, or FTP. Select the Enable option on each item, and then select a Schedule Profile from the pull-down list and set the
  • Airlink AICN1500W | User Manual - Page 36
    locate the backup file and then click Restore. Update Firmware This item displays the current firmware version. You can upgrade the firmware for your camera once you obtained a latest version of firmware. - Select the firmware: Click Browse to locate the backup file and then click Update. NOTE Make
  • Airlink AICN1500W | User Manual - Page 37
    4.9 Information The Information menu displays the current configuration and events log of the camera. Device Info Display the Basic, Video & Audio, and Network settings of the camera. System Log The Logs table displays the events log recorded by the system. - 36 -
  • Airlink AICN1500W | User Manual - Page 38
    CHAPTER 5 USING SKYIPCAM ULTRAVIEW 5.1 Starting the Program To start UltraView Pro, click Start (All) Programs Airlink101 SkyIPCam UltraView SkyIPCam UltraView. Alternatively, you can start the program by simply double-clicking the program icon on the desktop of your computer. In the
  • Airlink AICN1500W | User Manual - Page 39
    control panel such as the Quick Launch buttons, and so on. NOTE UltraView Software requires the resolution setting to be1024 x 768 or higher. For best view Setting window, switch to the eMap View window, or check the Camera Status. Click to display the Playback window. Click to display the Schedule
  • Airlink AICN1500W | User Manual - Page 40
    displayed as the major view. Display the connected camera(s) in 17-camera view mode using a split window. The first camera is displayed as the major view. Display the connected camera(s) in N x N grid view mode, supporting up to 36 views (up to 32 cameras). Display the live view of the selected
  • Airlink AICN1500W | User Manual - Page 41
    ERROR: syntaxerror OFFENDING COMMAND: %ztokenexec_continue STACK: -filestream-
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
SkyIPCam1500W
Wireless N Night Vision Network Camera
Model # AICN1500W
User’s Manual
Ver. 1.0