Airlink AICN500W Quick Installation Guide

Airlink AICN500W Manual

Airlink AICN500W manual content summary:

  • Airlink AICN500W | Quick Installation Guide - Page 1
    Quick Installation Guide SkyIPCam500W Wireless Night Vision Network Camera Model # AICN500W Ver. 1A
  • Airlink AICN500W | Quick Installation Guide - Page 2
    • Wireless Night Vision Network Camera • Antenna • Camera Stand • Power Adapter • Ethernet Cable (Cat.5) • Utility CD • Quick Installation Guide Section 1 This Quick Installation Guide only provides basic instructions. For detailed information on using this product, please refer to the User's Manual
  • Airlink AICN500W | Quick Installation Guide - Page 3
    screen to appear. Step 2 Click on Install SkyIPCam Utility. Note: If the auto-run screen does not appear automatically, go to Start, Run, type: D:\ Utility\Setup.exe (where D is the letter of your CD drive) and click OK.
  • Airlink AICN500W | Quick Installation Guide - Page 4
    Step 3 Keep clicking Next on the following screens. Step 4 Click Close to complete the installation.
  • Airlink AICN500W | Quick Installation Guide - Page 5
    (All) Programs > AirLink101 > AirLink101 SkyIPCam Utiliy Step 2 Select the IP Camera you want to configure from the list and click on the Change IP button. Note: If the Camera's IP address does not show up in the window, make sure the camera is properly connected to the same network as your computer
  • Airlink AICN500W | Quick Installation Guide - Page 6
    suggested one has already been used by another device in the same network. Another option is that if your router's DHCP server is enabled, you can select DCHP, so the router will automatically assign a dynamic IP address to your camera. Enter "admin" for both ID and password, and click Change. Step
  • Airlink AICN500W | Quick Installation Guide - Page 7
    Step 5 When you are prompted for the username and password, enter "admin" for both User name and Password, and click OK. Step 6 The camera viewing window will appear. Click on Setup, and then click on Smart Wizard.
  • Airlink AICN500W | Quick Installation Guide - Page 8
    Step 7 Enter a name for your camera and a location if you like. Then enter "admin" for both Admin Password and Confirm Password. Click Next. Step 8 You can change the camera's IP settings in the below window. If you have done this in Step 3, click Next and go to the next step.
  • Airlink AICN500W | Quick Installation Guide - Page 9
    get this information from your internet service provider. You can also set this up at a later time. Click Next. Step 10 Enter the wireless information according to your wireless router's (or access point's) setting if you would like to connect the camera wirelessly to the network. You can log in to
  • Airlink AICN500W | Quick Installation Guide - Page 10
    Step 11 Confirm your settings at the last window. If everything is correct, click Apply and the configuration is completed.
  • Airlink AICN500W | Quick Installation Guide - Page 11
    Section 4 Viewing Images Method 1 --- Access from Web Browser Step 1 If you know the IP address of your network camera, you may open the Web Browser on your computer. Step 2 Type the IP address of your camera (the default IP is 192.168.1.240) in the Address bar, and then press [Enter]. Step 3
  • Airlink AICN500W | Quick Installation Guide - Page 12
    Step 4 If it is the first time for your computer to access the Web based viewing page, you may be prompted to install the software of ActiveX Control. Click on the bar on top of the screen and click on Install ActiveX Control. Step 5 Click on Install, and then you may be able to view images.
  • Airlink AICN500W | Quick Installation Guide - Page 13
    Step 6 To get a clear view of images, you can simply rotate the camera's lens clockwise or counter-clockwise to adjust the focus.
  • Airlink AICN500W | Quick Installation Guide - Page 14
    Method 2 --- Access from SkyIPCam Utility Step 1 Go to Start > (All) Programs > AirLink101 > AirLink101 SkyIPCam Utiliy, and open the Airlink101 SkyIPCam Utility. Step 2 Select your camera from the list and click Link Step 3 Follow Step 3 to Step 6 mentioned in Method 1.
  • Airlink AICN500W | Quick Installation Guide - Page 15
    Technical Support E-mail: [email protected] Toll Free: 1-888-746-3238 Website: www.airlink101.com *Theoretical maximum wireless signal rate based on IEEE standard 802.11g specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15

Quick Installation Guide
SkyIPCam500W Wireless Night Vision Network Camera
Model # AICN500W
Ver. 1A