Airlink AICN747 User Manual

Airlink AICN747 Manual

Get Airlink AICN747 PDF manuals and user guides View all Airlink AICN747 manuals
Add to My Manuals
Save this manual to your list of manuals

Airlink AICN747 manual content summary:

  • Airlink AICN747 | User Manual - Page 1
    SkyIPCam747 Night Vision Pan/Tilt Network Camera Model # AICN747 User's Manual Ver. 1.0
  • Airlink AICN747 | User Manual - Page 2
    7 CHAPTER 3 ...8 SOFTWARE INSTALLATION 8 3.1 Installing SkyIPCam Utility 8 3.2 Using SkyIPCam Utility 9 3.3 Viewing Images 14 3.4 Using SkyIPCam View 18 CHAPTER 4 ...31 CONFIGURATION ...31 Specification ...50 A.2 GPIO Terminal Application 51 A.3 Glossary of Terms 52 TECHNICAL SUPPORT 57 -1-
  • Airlink AICN747 | User Manual - Page 3
    TO YOUR CAMERA 1.1 Checking the Package Contents Check the items contained in the package carefully. You should have the following: 5 One Pan-Tilt AICN747 Network Camera. 5 One AC Power Adapter. 5 One Wall Mount Kit. 5 One GPIO Connector 5 One Ethernet Cable (RJ-45 type). 5 One Installation CD-ROM
  • Airlink AICN747 | User Manual - Page 4
    1.2 Getting to Know Your Camera Front View -3-
  • Airlink AICN747 | User Manual - Page 5
    site voice. In addition, you can connect an external speaker to the camera to talk to people at the camera view. „ Day & Night Surveillance Supported The seven Infrared LEDs around the standard lens assembly enable the camera to capture crystal clear images in dark environments or at night. When the
  • Airlink AICN747 | User Manual - Page 6
    Web Configuration. „ Remote Control Supported By using a standard Web browser or the bundled SkyIPCam View software application, the firmware is available. The users are also allowed to monitor the image and take snapshots via the network. „ Multiple Platforms Supported The camera supports
  • Airlink AICN747 | User Manual - Page 7
    CHAPTER 2 HARDWARE INSTALLATION 2.1 Installing the Wall Mount Kit The camera comes with a Wall Mount Kit, which allows you to place your camera anywhere by mounting the camera through the three screw holes located in the base of the Wall Mount Kit. Screw Wall Mount Kit Screw Screw 2.2
  • Airlink AICN747 | User Manual - Page 8
    2.3 Applications of the Camera The camera can be applied in multiple applications, including: „ Monitor local and remote places and objects via Internet or Intranet. „ Capture still images and video clips remotely. „ Upload images or send email messages with the still images attached. The following
  • Airlink AICN747 | User Manual - Page 9
    Utility Step 1 Insert the provided CD and wait for the auto-run screen to appear. Step 2 Click on Install SkyIPCam Utility. Note: If the autorun screen does not appear automatically, go to Start, Run, type D:\ Utility\Setup.exe (where D is the letter of your CD
  • Airlink AICN747 | User Manual - Page 10
    Step 4 Click Close to complete the installation. 3.2 Using SkyIPCam Utility Step 1 Go to Start > (All) Programs > AirLink101 > AirLink101 SkyIPCam Utiliy Step 2 Select the IP Camera you want to configure from the list and click on the Change IP button. Note: If the Camera's IP
  • Airlink AICN747 | User Manual - Page 11
    simply accept the suggested Static IP, or you can manually change the last 3-digit number of the IP Address, in case that the suggested one has already been used by another device in the same network. Another option is that if your router's DHCP server is enabled, you can select DCHP, so
  • Airlink AICN747 | User Manual - Page 12
    Step 5 When you are prompted for the username and password, enter "admin" for both User name and Password, and click OK. Step 6 The camera viewing window will appear. Click on Setup, and then click Smart Wizard. - 11 -
  • Airlink AICN747 | User Manual - Page 13
    Step 7 You may change the default Camera Name and enter a name for the Location if you like. Then enter "admin" for both Admin Password and Confirm Password. Click Next. Step 8 You may also change the camera's IP settings in the below window, and click Next. - 12 -
  • Airlink AICN747 | User Manual - Page 14
    set up email alerts that you can receive in the future, Please enter your email information here. You can get this information from your internet service provider. If you want to set this up at a later time, click Next. Step 10 Confirm your settings at the last window. If everything is
  • Airlink AICN747 | User Manual - Page 15
    3.3 Viewing Images Method 1 --- Access from Web Browser Step 1 If you know the IP address of your network camera, you may open the Web Browser on your computer. Step 2 Type the IP address of your camera (the default IP is 192.168.1.240) in the Address bar, and then press [Enter]. Step 3 Enter "admin
  • Airlink AICN747 | User Manual - Page 16
    Step 5 Click on Install, and then you may be able to view images. Step 6 To get a clear view of images, you may simply rotate the camera's lens clockwise or counterclockwise to adjust the focus. - 15 -
  • Airlink AICN747 | User Manual - Page 17
    Note: If you are not able to find the pictures or video clips saved by "Snapshot' or "Manual Record" under Windows Vista, you may also need to disable Internet Explorer's Protected Mode: Open Internet Explorer and click Tools. Then click Internet Options. Select
  • Airlink AICN747 | User Manual - Page 18
    Method 2 --- Access from SkyIPCam Utility Step 1 Go to Start > (All) Programs > AirLink101 > AirLink101 SkyIPCam Utiliy, and open the Airlink101 SkyIPCam Utility. Step 2 Select your camera from the list and click Link Step 3 Follow Step 3 to Step 5 mentioned in Method 1. - 17 -
  • Airlink AICN747 | User Manual - Page 19
    3.4 Using SkyIPCam View To Install the Program Step 1 Insert the installation CD to the CD ROM. When the autorun screen pops up, click on Install SkyIPCam View from the auto-run screen. Step 2 Keep clicking Next on the following windows. - 18 -
  • Airlink AICN747 | User Manual - Page 20
    complete the installation. To Launch the Program This section describes the user interface and operating instructions of SkyIPCam View. To launch the program, click Start > Programs > AirLink101 > AirLink101 SkyIPCam View, and the main screen will appear as below: NOTE: Please set the resolution to
  • Airlink AICN747 | User Manual - Page 21
    boxes are "blank." Click SETTING > Account to change the ID and password of Lock/Unlock function. VIEW SELECTION Panel - View mode buttons: SkyIPCam View provides multiple view modes, including 1/4/9/16 windows and Full screen mode. - SCAN: When you connect multiple cameras, click this button to
  • Airlink AICN747 | User Manual - Page 22
    recording and save the file in the computer. - TALK: Click to speak out through the camera. This button is available only when the connected camera supports 2-way audio function. - LISTEN: Click to receive the on-site sound and voice from the camera. This button is available only when the connected
  • Airlink AICN747 | User Manual - Page 23
    - SWING: If you have saved two or more positions for the selected camera, click this button to control the camera swinging from one position to another position. „ Video View Window and Camera List Video View Window Camera List - Video View Window: This window displays the video view of the selected
  • Airlink AICN747 | User Manual - Page 24
    z Select the Search tab if you are not sure of the camera's IP address. Click Search camera to search the available camera within the network. Once the camera is found and is shown in the list, select it and click Add Camera. z Select the Input tab to add a camera by entering its IP address directly
  • Airlink AICN747 | User Manual - Page 25
    that displays live view image and Web Configuration of the selected camera. To Record Video SkyIPCam View provides three methods to record video clips: one is to click the RECORD/ALL RECORD button to record manually; the second is to record by motion detection; the third is to set the recording
  • Airlink AICN747 | User Manual - Page 26
    z Schedule recording This recording method will work after you have completed the required settings in Schedule Recording Configuration. The recording schedule can be defined by Schedule Period or Recording Time. - Schedule Period: First, select the camera from the pull-down list. Then, click Add to
  • Airlink AICN747 | User Manual - Page 27
    - Recording Time: First, select the camera from the pull-down list and select Recording time tab. Then, select the weekday from the day buttons and then set the time period. Click Apply to save the settings. To Configure the Recording Settings To configure the recording settings, including the
  • Airlink AICN747 | User Manual - Page 28
    the computer doesn't have video codec to playback the recorded video. You can download video codec from http://www.xvid.org/downloads.15.0.html to support. - 27 -
  • Airlink AICN747 | User Manual - Page 29
    To Set up Motion Detection Options When the motion detection function of the selected camera is enabled, you can set the Motion Options by selecting Alarm, Recording, Send e-Mail, and Trigger Out under SETTING > Motion Configuration. z Alarm: Select Beep or Music to alert you for the motion detected
  • Airlink AICN747 | User Manual - Page 30
    - Mail To: Enter the email address of the user who will receive the email. - User Name: Enter the user name to login the mail server. - Password: Enter the password to login the mail server. - Subject: Enter a subject for the notification email. Account You can set a username and password for the
  • Airlink AICN747 | User Manual - Page 31
    Other It allows you to set the rotation interval if you are monitoring multiple cameras. Information Click SETTING > About to display the information of the software application. - 30 -
  • Airlink AICN747 | User Manual - Page 32
    the Web Configuration You can access and manage the camera through the Web browser and the provided software application SkyIPCam View. This chapter describes the Web Configuration, and guides you through the configuration of the camera by using the web browser. To configure the camera, click Setup
  • Airlink AICN747 | User Manual - Page 33
    Server. You need to select the proper IP address of the server and the update interval from the pulldown menu in the following two boxes. - Manual: Select this option to set the date and time
  • Airlink AICN747 | User Manual - Page 34
    Basic >> User „ Administrator You can use this option to change administrator's password for your camera. „ General User - User Name: Enter the user's name you want to add to use the camera. - Password: Enter the password for the new user. When you are finished, click Add/Modify to add the new user
  • Airlink AICN747 | User Manual - Page 35
    and you will always know what it is. - Static IP: Select this option to assign the IP address for the camera directly. You can use SkyIPCam Utility to obtain the related setting values. IP Subnet Mask Default Gateway Enter the IP address of the camera. The default setting is 192.168
  • Airlink AICN747 | User Manual - Page 36
    sign up for DDNS service with the service provider first. DDNS function on the camera is ONLY used if you are NOT using a NAT router and your camera has a NAT router, the camera's DDNS function will not work, and you will need to use the DDNS function in your router. „ UPnP The camera supports UPnP (
  • Airlink AICN747 | User Manual - Page 37
    Network >> IP Filter The IP Filter setting allows the administrator of the camera to limit the users within a certain range of IP addresses to access the camera. „ Start/End IP Address Assign a range of IP addresses that are not allowed to access the camera by entering the Start IP address and End
  • Airlink AICN747 | User Manual - Page 38
    4.4 Pan/Tilt Settings The Pan/Tilt menu allows you to configure the pan/tilt functions of the camera. Pan & Tilt >> Pan & Tilt Settings - Pan/Tilt Calibration: Click Calibration to calibrate the position of the camera lens. - Pan Steps: Set the changing range (1~20 degrees) when you click the Left/
  • Airlink AICN747 | User Manual - Page 39
    4.5 Setting up Video & Audio The Video & Audio menu contains three sub-menus that provide the video and audio settings for the camera. Video & Audio >> Camera „ Image Setting - Brightness: Adjust the brightness level from 0 ~ 100. - Contrast: Adjust the contrast level from 0 ~ 100. - Saturation:
  • Airlink AICN747 | User Manual - Page 40
    Video & Audio >> Video „ MJPEG - Video Resolution: Select the desired video resolution from the three formats: VGA, QVGA and QQVGA. The higher setting (VGA) obtains better video quality while it uses more resource within your network. - Video Quality: Select the desired image quality from five
  • Airlink AICN747 | User Manual - Page 41
    Video & Audio >> Audio „ Camera Microphone In Select the Enable option to enable the camera's audio function, so that you can receive the on-site sound and voice from the camera. „ Camera Speaker Out Select the Enable option to enable the camera's external speaker function, so that the connected
  • Airlink AICN747 | User Manual - Page 42
    : Enter the destination folder for uploading the images. For example, /Test/. - Passive Mode: Select the Enable option to enable passive mode. If you are having trouble, you can enable/disable this mode. - 41 -
  • Airlink AICN747 | User Manual - Page 43
    Event Server Setting >> Email „ Email - SMTP Server Address: Enter the mail server address. For example, mymail.com. - Sender Email Address: Enter the email address of the user who will send the email. For example, [email protected]. - Sender User Name: Enter the user name to login the mail server. -
  • Airlink AICN747 | User Manual - Page 44
    4.7 Motion Detect The Motion Detect menu contains the command and option that allow you to enable and set up the motion detection feature of the camera. The camera provides two detecting areas. To enable the detecting area, select Window 1 or 2 from the pull-down list, and then select Enable. When
  • Airlink AICN747 | User Manual - Page 45
    4.8 Event Configuration The Event Config menu contains five sub-menus that provide the commands to configure event profiles. Event Configuration >> General Setting - Snapshot/Recording Subfolder: You can assign a descriptive name for the subfolder to save the captured image/video files. Otherwise,
  • Airlink AICN747 | User Manual - Page 46
    Event Configuration >> Arrange Schedule Profile This sub-menu displays the scheduled profile(s). To customize the profile, click Add and then enter a descriptive name for the profile in the prompt dialog window. After entering the profile name, click OK and the profile is added to the Schedule
  • Airlink AICN747 | User Manual - Page 47
    Event Configuration >> Motion Detection Trigger Select the Enable option to enable the motion detection trigger function of the camera, so that you can set Trigger Out function or send captured images within the detecting area to the FTP server or email receiver. You have to configure corresponding
  • Airlink AICN747 | User Manual - Page 48
    Event Configuration >> Schedule Trigger You can separately configure the schedule for trigger function of the camera by Email, or FTP. Select the Enable option on each item, and then select a Schedule Profile from the pull-down list and set the Interval time. Event Configuration >> GPIO Trigger
  • Airlink AICN747 | User Manual - Page 49
    Tools menu provides the commands that allow you to restart or reset the camera. You can also backup and restore your configuration, and upgrade the firmware for the camera. „ Factory Reset Click Reset to restore all factory default settings for the camera. „ System Reboot Click Reboot to restart the
  • Airlink AICN747 | User Manual - Page 50
    4.10 Information The Information menu displays the current configuration and events log of the camera. „ Device Info Display the Basic, Video & Audio, and Network settings of the camera. „ System Log The Logs table displays the events log recorded by the system. - 49 -
  • Airlink AICN747 | User Manual - Page 51
    Processor ARM9 base RAM 32MB SDRAM ROM 4MB NOR Flash Power DC 12V „ Communication LAN 10/100Mbps Fast Ethernet, auto-sensed, Auto-MDIX Protocol support TCP/IP, UDP, ICMP, DHCP, NTP, DNS, DDNS, SMTP, FTP, PPPoE, UPnP „ Pan/Tilt Pan 165 degree (left) to 165 degree (right) Tilt 90
  • Airlink AICN747 | User Manual - Page 52
    Software "SkyIPCam View" for playback/recording/ configuration features „ Operating Environment Temperature - Operation: 0°C ~ 45°C - Storage: -15°C ~ 60°C Humidity - Operation: 20% ~ 85% non-condensing - Storage: 0% ~ 90% non-condensing „ EMI
  • Airlink AICN747 | User Manual - Page 53
    IP address can even change while it is still connected. It also supports a mix of static and dynamic IP addresses. This simplifies the task without the hassle of manually assigning it a unique IP address. DHCP allows the specification for the service provided by a router, gateway, or other network
  • Airlink AICN747 | User Manual - Page 54
    the numerical addressing format used to route the information. Your Internet service provider controls the IP address of any device it connects to the In smaller LANs, most people will allow the DHCP function of a router or gateway to assign the IP addresses on internal networks. IP address is
  • Airlink AICN747 | User Manual - Page 55
    mobile telephones. Network Address Translator generally applied by a router problem. When devices within your network request information from the Internet, the requests are forwarded to the Internet under the router reply. It is primarily used to troubleshoot Internet connections. Point-to-Point
  • Airlink AICN747 | User Manual - Page 56
    token-passing and Carrier Sense Multiple Access with Collision Detection (CSMA/CD), implemented as token-ring, ARCNET, FDDI, or Ethernet. The Router Information Protocol (RIP),a part of the Transmission Control Protocol/Internet Protocol (TCP/IP) suite, forwards packets from one network to another
  • Airlink AICN747 | User Manual - Page 57
    WAN WEP Windows WPA WPA2 Wide-Area Network. A wide-area network consists of groups of interconnected computers that are separated by a wide distance and communicate with each other via common carrier telecommunication techniques. WEP is widely used as the basic security protocol in Wi-Fi networks,
  • Airlink AICN747 | User Manual - Page 58
    1 2 Technical Support E-mail: [email protected] Toll Free: 1-888-746-3238 Web Site: www.airlink101.com * Actual data throughput will vary. Network conditions and environmental factors lower actual data throughput rate. Specifications are subject to change without notice. All products
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
SkyIPCam747
Night Vision Pan/Tilt Network Camera
Model # AICN747
User’s Manual
Ver. 1.0