Airlink APSUSB203 Quick Installation Guide

Airlink APSUSB203 Manual

Get Airlink APSUSB203 PDF manuals and user guides View all Airlink APSUSB203 manuals
Add to My Manuals
Save this manual to your list of manuals

Airlink APSUSB203 manual content summary:

  • Airlink APSUSB203 | Quick Installation Guide - Page 1
    3-Port Print Server Model # APSUSB203 Quick Installation Guide Ver. 1A
  • Airlink APSUSB203 | Quick Installation Guide - Page 2
    Section 1 Connecting the Print Server Warning: Only a USB printer may be connected to the USB port of the Print Server. Connecting any other USB device to the Print Server may damage the Print Server. Note: Do not plug the power cord to the Print Server until you have reached Step 4 of this section.
  • Airlink APSUSB203 | Quick Installation Guide - Page 3
    Section 2 Installing PS Utility Step 1 Insert the provided CD and wait for the autorun screen to appear. Step 2 Click on Install PS Utility. Note: If the autorun screen does not appear automatically, go to Start, Run, type D:\autorun.exe (where D is the letter of your CD drive) and click OK. Step 3
  • Airlink APSUSB203 | Quick Installation Guide - Page 4
    Step 4 Click Next. Step 5 Click Yes. Step 6 Click Finish.
  • Airlink APSUSB203 | Quick Installation Guide - Page 5
    Section 3 Configuring Network Setting Before configuring the Print Server's network setting, please take note of your computer's TCP/IP setting. Step 1 Click on Start, Run, and type command (for Windows 95/98/ME) or cmd (for Windows 2000/ XP) and click OK. Step 2 At the command prompt, type ipconfig
  • Airlink APSUSB203 | Quick Installation Guide - Page 6
    Address is 192.168.1.100, enter the same three numbers: 192.168.1 in the corresponding fields. Note: You can leave the last IP Address number 254 as is unless another network device (i.e. the Default Gateway) is already using that number. If another network device is already using 254,
  • Airlink APSUSB203 | Quick Installation Guide - Page 7
    by going to Start, (All) Programs, PS-Utility, PS-Utility v3.00. Step 2 Make sure the Print Server is detected under the Device Name. Step 3 Click on Show Web Setup to display the Print Server's Web Configuration Utility. Step 4 Verify that the Printer Status for the connected ports display On line.
  • Airlink APSUSB203 | Quick Installation Guide - Page 8
    fails to print a test page, please check the printer compatibility list on our web site at www.airlink101.com for a list of compatible printers. If your printer is not on the list, it may not be compatible with the Print Server. Step 6 Once the printer successfully prints out a test page, you may
  • Airlink APSUSB203 | Quick Installation Guide - Page 9
    : Make sure you have installed the printer driver locally on every computer that will use the Print Server in your network before running the PS sure to run the PS Wizard on all the computers that will use the Print Server in your network. Step 1 Insert the provided CD and wait for the autorun screen
  • Airlink APSUSB203 | Quick Installation Guide - Page 10
    Step 3 Click Next. Section 4 Step 4 Select the printer that is connected to the print server and click Next.
  • Airlink APSUSB203 | Quick Installation Guide - Page 11
    Step 5 Double-click on the Print Server, select the Printer Port that the printer is connected to and click Next. Step 6 Click Finish and OK. (For Windows 95/98/ME, you'll need to reboot the computer). Step 7 Re-run the PS Wizard and setup any remaining printer(s) that are connected to the print
  • Airlink APSUSB203 | Quick Installation Guide - Page 12
    final step in setting up the Print Server is to perform an operating system print test. Please note that the instructions below are for Windows XP, but the steps are similar for all the other Windows operating systems. Step 1 Click on Start, Settings, Printers and Faxes. Step 2 Right-click on the
  • Airlink APSUSB203 | Quick Installation Guide - Page 13
    . Windows should print out a test page. You have successfully configured the Print Server for printing. For more information on how to use the Web Configuration Utility or setup for Mac OS, please refer to the User's Manual in the provided CD. Section 7 Technical Support E-mail: support@airlink101
  • Airlink APSUSB203 | Quick Installation Guide - Page 14
    and logos that are identified as trademarks and/or service marks are, unless noted otherwise, the trademarks and service marks of AirLink101. All other product or service names are the property of their respective holders. AirLink101 products are protected under numerous U.S. and foreign patents and
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
Quick Installation Guide
Model # APSUSB203
Ver. 1A
3-Port Print Server