Airlink ASW316 Quick Installtion Guide
Airlink ASW316 Manual
 |
View all Airlink ASW316 manuals
Add to My Manuals
Save this manual to your list of manuals |
Airlink ASW316 manual content summary:
- Airlink ASW316 | Quick Installtion Guide - Page 1
Quick Installation Guide 16-Port 10/100Mbps Fast Ethernet Switch Model# ASW316 Ver. 1A - Airlink ASW316 | Quick Installtion Guide - Page 2
any derivative such as translation, transformation, or adaptation without permission from Airlink101®. Preface FCC Warning This device has been tested and found to comply , if not installed and used in accordance with the user's manual, may cause interference in which case the user will be required - Airlink ASW316 | Quick Installtion Guide - Page 3
helps you to extend your network structure quickly and reliably. Purpose This Quick Installation Guide tells you how to install your Switch and how to connect it to your Ethernet network. Terms/Usage In this manual, the term "Switch" (first letter upper case) refers to your 16-Port 10/100Mbps Fast - Airlink ASW316 | Quick Installtion Guide - Page 4
The figure below shows the front panel of the Switch. Figure 1-1 Front Panel view of the Switch • 10/100Mbps Ports (Port 1~16): These ports support 10/ 100Mbps, and can operate in Half/Full Duplex transfer modes. These ports also support automatic MDI/MDI-X crossover detection, giving true "plug and - Airlink ASW316 | Quick Installtion Guide - Page 5
1.2.3 LED Indicators information The front panel LEDs provide instant status feedback and help monitoring and troubleshooting when needed. Figure 1-3 Front Panel view of the switch • POWER: Power Indicator LED POWER Color Green Solid The Switch is power-on Status Blinking N/A Off No power 4 - Airlink ASW316 | Quick Installtion Guide - Page 6
• Port 1~16 10/100M Status LEDs LED LINK/ ACT LED 10/100M Color Green Color Green Solid The respective port is successfully connected to an Ethernet network. Solid The respective port is connected to the 100Mbps Ethernet network. Status Blinking The port is transmitting or receiving data on the - Airlink ASW316 | Quick Installtion Guide - Page 7
Physical and Environmental • Power Input: 100~240V AC, 50~60Hz • Operation Temperature: 0 °C ~ 50°C • Storage Temperature: -20°C ~ 70°C • Humidity: 10% ~ 90% RH, non-condensing 2 Installing the Switch The site where you place the - Airlink ASW316 | Quick Installtion Guide - Page 8
place. See the Technical Specifications for the acceptable temperature and humidity operating ranges. Install the Switch on a sturdy, level surface that can support its weight. Connect the power cord to the Switch and the power outlet. The distance is no more than 182cm. Leave at least 10cm (about - Airlink ASW316 | Quick Installtion Guide - Page 9
to your 10/100Mbps Fast Ethernet network. 3.1 Connection Your network device (i.e. computer, switch, IP Camera, VoIP) can be connected to any port of the Switch via a two-pair Category 5 Cable or above. If the LED indicators do not light up after making a proper connection, check your network - Airlink ASW316 | Quick Installtion Guide - Page 10
and logos that are identified as trademarks and/or service marks are, unless noted otherwise, the trademarks and service marks of AirLink101. All other product or service names are the property of their respective holders. AirLink101 products are protected under numerous U.S. and foreign patents and
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
 |
 |
Quick Installation Guide
16-Port 10/100Mbps
Fast Ethernet Switch
Model# ASW316
Ver. 1A