Airlink ASW408POE Quick Installation Guide
Airlink ASW408POE Manual
 |
View all Airlink ASW408POE manuals
Add to My Manuals
Save this manual to your list of manuals |
Airlink ASW408POE manual content summary:
- Airlink ASW408POE | Quick Installation Guide - Page 1
Guide 8-Port 10/100Mbps Switch with 4-Port PoE Model# ASW408POE cables or an up-link port • Flow control fully supported: - Half-duplex: backpressure flow control - Full-duplex: Guide tells you how to install your Switch and how to connect it to your Ethernet network. Terms/Usage In this manual, - Airlink ASW408POE | Quick Installation Guide - Page 2
1 x ASW408POE • 1 x Switching Power Adapter • 1 x Quick Installation Guide • 4 -duplex transfer modes. These ports also support automatic MDI/MDIX crossover detection, which give LEDs provide instant status feedback and help monitoring and troubleshooting when needed. • Power: Power Indicator LED - Airlink ASW408POE | Quick Installation Guide - Page 3
LED Power Color Green Status Solid Off Power output to PoE devices has reached When the system is or surpassed the using less than 38W max. power • PoE 1~4 LEDs LED Color PoE 1~4 Green Solid PoE devices connected successfully Status Off PoE port failed, possibly due to: power shortage - Airlink ASW408POE | Quick Installation Guide - Page 4
cable. 6 Technical Support E-mail: [email protected] Web Site: www.airlink101.com *Network conditions and service marks are, unless noted otherwise, the trademarks and service marks of AirLink101. All other product or service names are the property of their respective holders. AirLink101
-
1 -
2 -
3 -
4
 |
 |
Quick Installation Guide
8-Port 10/100Mbps Switch
with 4-Port PoE
Model# ASW408POE
Ver. 1A
1
Power Over Ethernet (PoE) is an evolving technology designed to
deliver power and transmit data on an Ethernet cable at the same
time. Modeling after the technology used in telecommunication
systems which supplies power to telephones, PoE powers network
device without the need of AC electrical outlets. By eliminating the
power cords and the power infrastructure, the technology greatly
simplifies the wiring and deployment matters and brings lots of
convenience
and
benefits
in
home,
office,
and
industrial
environments.
Features
•
8 x 10/100Mbps Auto-negotiation Fast Ethernet RJ 45 with
4-Port PoE function (Port -1 to Port-4)
•
Compliant with IEEE802.3af specification
•
Support PoE Power Maximum 15.4W per PoE port
•
Support PoE Powered Device (PD ) classification identify
•
Over Current and Short-circuit Protection
•
Each port supports auto MDI/MDIX, no need to use cross-over
cables or an up-link port
•
Flow control fully supported:
-
Half-duplex: backpressure flow control
-
Full-duplex: IEEE802.3x flow control
•
Provide non-blocking wire speed reception and transmission
•
Embedded 768K bits SDRAM for packet buffering
•
1024-entry look-up table in direct mapping mode
•
Embedded 16-entry CAM for hash collision mapping
•
Optional maximum packet length 1536/1522 Bytes
Purpose
This Quick Installation Guide tells you how to install your Switch and
how to connect it to your Ethernet network.
Terms/Usage
In this manual, the term “Switch” (first letter upper case) refers to your
8-Port 10/100Mbps Switch with 4-Port PoE, and “switch” (first letter
lower case) refers to other Ethernet switches.
1. Introduction