Alpine CDE-103BT Cde-103bt Owner's Manual (english)

Alpine CDE-103BT Manual

Alpine CDE-103BT manual content summary:

  • Alpine CDE-103BT | Cde-103bt Owner's Manual (english) - Page 1
    R EN MP3/WMA/AAC CD Receiver CDE-103BT FR ES • OWNER'S MANUAL Please read before using this equipment. • MODE D'EMPLOI Veuillez lire avant d'utiliser cet appareil. • MANUAL DE OPERACIÓN Léalo antes de utilizar este equipo. ALPINE ELECTRONICS MARKETING, INC. 1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo
  • Alpine CDE-103BT | Cde-103bt Owner's Manual (english) - Page 2
  • Alpine CDE-103BT | Cde-103bt Owner's Manual (english) - Page 3
    Defeat 12 Setting the Bass Control 12 Setting the Treble Control 13 Adjusting the High Pass Filter 13 Turning Loudness On/Off 13 Other Functions Displaying the Text 14 Displaying Time 14 Using the Front AUX Input Terminal 15 SETUP BLUETOOTH Setting Setting the BLUETOOTH Connection (BT IN 16
  • Alpine CDE-103BT | Cde-103bt Owner's Manual (english) - Page 4
    (Auto Answer 19 Deleting a BLUETOOTH Device from the list 19 Displaying the phone service provider name 19 Adjusting the volume for the microphone input 19 Selecting the output speaker 19 Displaying the firmware version 19 Updating the firmware 19 Hands-Free Phone Control 20 About the Hands
  • Alpine CDE-103BT | Cde-103bt Owner's Manual (english) - Page 5
    Disc Do not attempt to play cracked, warped, or damaged discs. Playing a bad disc could severely damage the playback mechanism. Maintenance If you have problems, do not attempt to repair the unit yourself. Return it to your Alpine dealer or the nearest Alpine Service Station for servicing. 3-EN
  • Alpine CDE-103BT | Cde-103bt Owner's Manual (english) - Page 6
    To prevent the CD from jamming, "ERROR" is displayed if discs with mechanism. Installation Location Make sure this unit will not be installed in disc surface and improving sound quality. However, problems. We recommend not using these accessories on discs played in Alpine CD players. Transparent
  • Alpine CDE-103BT | Cde-103bt Owner's Manual (english) - Page 7
    in the car or this unit), CDs recorded under unstable conditions, CDs on which a recording failed or a re-recording was attempted, copy-protected CDs which do not conform to the audio CD industry standard. • Use discs with MP3/WMA/AAC files written in a format compatible with this unit. For details
  • Alpine CDE-103BT | Cde-103bt Owner's Manual (english) - Page 8
    the front panel until it locks firmly into the main unit. (Release) / /ENT /MUTE Accessory List • Head unit 1 • Power cable 1 • Microphone (4m 1 • Mounting sleeve 1 • Carrying case 1 • Bracket key 2 • Screw (M5 × 8 4 • Owner's Manual 1 set Turning Power On and Off Press SOURCE/ to turn
  • Alpine CDE-103BT | Cde-103bt Owner's Manual (english) - Page 9
    return to normal mode automatically. Controllable with Remote Control This unit can be controlled with an optional Alpine remote control. For details, consult your Alpine dealer. Point the optional remote control transmitter at the remote-control sensor. Remote control sensor Radio SOURCE/ BAND
  • Alpine CDE-103BT | Cde-103bt Owner's Manual (english) - Page 10
    pulled into the unit automatically, and the " " indicator lights up . When a disc is already inserted, press SOURCE/ to switch to the DISC mode. The mode will change every time the button is pressed. TUNER DISC USB AUDIO iPod*1/AUX+*2 AUX*3 TUNER *1 Displayed only when the iPhone/iPod is connected
  • Alpine CDE-103BT | Cde-103bt Owner's Manual (english) - Page 11
    audio data, MP3 data, WMA data and AAC data. • WMA format files that are protected by DRM (Digital Rights Management), AAC format files that have been purchased from the iTunes Store and files that are copy-protected (copyright protection) cannot be played back on this unit. • The track display
  • Alpine CDE-103BT | Cde-103bt Owner's Manual (english) - Page 12
    is capable of compressing audio data at extremely high ratios, reducing the size of music files to as much as one-tenth their original size. This is achieved while still maintaining near CD quality. The MP3 format realizes such high compression ratios by eliminating the sounds that are either
  • Alpine CDE-103BT | Cde-103bt Owner's Manual (english) - Page 13
    , etc., are not displayed correctly. Formats supported This device supports CD-ROM XA, Mixed Mode CD, Enhanced CD (CD-Extra) and Multi-Session sound quality, but also the larger the volume of data. Encoding Converting music CDs, WAVE (AIFF) files, and other sound files into the specified audio
  • Alpine CDE-103BT | Cde-103bt Owner's Manual (english) - Page 14
    TRE LEVEL, BALANCE, FADER or DEFEAT mode, the unit automatically returns to normal mode. * When the subwoofer Control You can change the Bass Frequency emphasis to create your own tonal preference. 1 Press SOUND effective for all other sources (FM, AM, CD, etc.). • The function is inoperable when
  • Alpine CDE-103BT | Cde-103bt Owner's Manual (english) - Page 15
    adjusted for one source are effective for all other sources (FM, AM, CD, etc.). • The function is inoperable when DEFEAT is set to ON. High Pass Filter The High Pass Filter on this unit can be adjusted to suit your personal taste. 1 Press SOUND/SETUP repeatedly to select the HPF mode. BASS TREBLE
  • Alpine CDE-103BT | Cde-103bt Owner's Manual (english) - Page 16
    , artist name, and album name). All other tag data is ignored. Indicator/ Mode CD Mode MP3/WMA/AAC/ USB AUDIO Mode iPhone/iPod Mode -- Folder Name*2 being displayed -- -- Artist Name*1 Artist Name*1 being displayed being displayed Text (Disc Album Name*1 Album Name*1 Name*3) being being
  • Alpine CDE-103BT | Cde-103bt Owner's Manual (english) - Page 17
    panel. An optional adapter cable is required (standard RCA to 3.5ø mini-phono plug or 3.5ø to 3.5ø mini phono plug). Press SOURCE/ , and select the AUX mode to listen to the portable device. TUNER DISC USB AUDIO iPod*1/AUX+*2 AUX TUNER *1 Displayed only when the iPhone/iPod is connected and AUX
  • Alpine CDE-103BT | Cde-103bt Owner's Manual (english) - Page 18
    BLUETOOTH SETUP" on page 18. • If the mobile phone compatible with the Voice Dial function is connected, the Voice Dial function can be used. Sound red. Dimmer Control DIM AUTO (Initial setting) / DIM MANUAL Set the DIMMER control to AUTO to decrease the illumination brightness of the unit with the
  • Alpine CDE-103BT | Cde-103bt Owner's Manual (english) - Page 19
    of this unit. A conversion cable (KCE-237B) for building up the AUX IN (optional) is required. A portable music device and an iPhone/iPod cannot be the sound of the portable device is input to the unit. AUX+ OFF: Set to OFF when an iPhone/iPod is connected. You can change the AUX+ name display when
  • Alpine CDE-103BT | Cde-103bt Owner's Manual (english) - Page 20
    device (Pairing) For details on the control from a BLUETOOTH compatible device, refer to the Owner's Manual of the BLUETOOTH compatible device. 1 Set a BLUETOOTH connection from a BLUETOOTH compatible device. 2 The PIN code ("0000") is displayed on the connected unit. • The PIN code is fixed as
  • Alpine CDE-103BT | Cde-103bt Owner's Manual (english) - Page 21
    BLUETOOTH compatible device will be displayed. If a BLUETOOTH compatible device is not connected, "ID UNSENT" will also be displayed. • Depending on the character type some phone service provider name cannot be displayed. "ID UNSENT" will also be displayed. Adjusting the volume for the microphone
  • Alpine CDE-103BT | Cde-103bt Owner's Manual (english) - Page 22
    are announced by the received call ring tone and a displayed message (PHONE). Press . The call starts. • When "Setting the Received Calls automatically (Auto Answer)" (page 19) is set to AT ANS ON, you can receive a call automatically. • While calling, the source sound on the unit is muted. After
  • Alpine CDE-103BT | Cde-103bt Owner's Manual (english) - Page 23
    MP3/WMA/AAC, you can play these files on this unit. 1 Press SOURCE/ to switch to the USB AUDIO mode. The mode will change every time the button is pressed. TUNER DISC USB AUDIO iPod*1/AUX+*2 AUX*3 TUNER *1 Displayed only when the iPhone/iPod is connected and AUX+ SETUP is set to OFF, refer
  • Alpine CDE-103BT | Cde-103bt Owner's Manual (english) - Page 24
    supports FAT 12/16/32 for USB memory device. / /MUTE /ESC /ENT Preset buttons (1 through 6) VIEW An iPhone/iPod can be connected to this unit by using the proprietary ALPINE FULL SPEED Connection Cable (KCE-433iV) (sold separately). When this unit is connected by using the cable, the controls
  • Alpine CDE-103BT | Cde-103bt Owner's Manual (english) - Page 25
    Playback 1 Press SOURCE/ to switch to the iPod mode. TUNER DISC USB AUDIO iPod*1/AUX+*2 AUX*3 TUNER *1 Displayed only when the iPhone/iPod is connected and AUX+ SETUP is set to OFF, refer to "Setting the AUX+ SETUP Mode" (page 17). *2 Displayed only when the AUX+ SETUP is set to ON, refer to "
  • Alpine CDE-103BT | Cde-103bt Owner's Manual (english) - Page 26
    by that artist are searchable. • This function is inactive during shuffle ( ) playback. Random Play Shuffle (M.I.X.) The Shuffle function of the iPhone/iPod is displayed as unit. on this Shuffle Albums: The songs on each album are played back in proper order. Upon completion of all the songs on
  • Alpine CDE-103BT | Cde-103bt Owner's Manual (english) - Page 27
    or . Displaying the Text You can display the tag information of a song in the iPhone/iPod. Press VIEW. Each press changes the display. • When unit is 64 (64 byte). • Some characters may not be correctly displayed. • "NO SUPPORT" is displayed if text information is not supported by the unit
  • Alpine CDE-103BT | Cde-103bt Owner's Manual (english) - Page 28
    unit is still not functioning normally, please review the items in the following checklist. This guide will help you isolate the problem if the unit is at fault. Otherwise, make sure the rest of your system is properly connected or consult your authorized Alpine dealer. Basic No function or display
  • Alpine CDE-103BT | Cde-103bt Owner's Manual (english) - Page 29
    -Up" (page 6). To reset the iPod, refer to the Owner's Manual of the iPod. Indication for CD Player Indication for USB memory • Abnormal current is run to the USB connector device (an error message may be displayed if the USB device that is not compatible with the unit is connected). USB memory is
  • Alpine CDE-103BT | Cde-103bt Owner's Manual (english) - Page 30
    error. - Turn the ignition key off, and then set to ON again. - Reset the iPod. - Check the display by reconnecting between the iPhone/iPod and this unit, using the iPhone/iPod cable. • Caused by the iPhone/iPod Software Version not being compatible with this unit. - Update the iPhone/iPod
  • Alpine CDE-103BT | Cde-103bt Owner's Manual (english) - Page 31
    kHz 22.5 µV/27 dB CD PLAYER SECTION Frequency Response Wow AUDIO Layer-3 WMA Decoding Windows Media™ Audio BLUETOOTH SECTION BLUETOOTH Specification Output Power HFP HSP BLUETOOTH V 2.0 +4 dBm Max. (Power class 2) (Hands-Free Profile) (Head Set Profile) GENERAL Power Requirement 14.4 V DC
  • Alpine CDE-103BT | Cde-103bt Owner's Manual (english) - Page 32
    or dust. Moisture or dust that penetrates into this unit may result in product failure. Precautions • Be sure to disconnect the cable from the (-) battery post before installing your CDE-103BT. This will reduce any chance of damage to the unit in case of a short-circuit. • Be sure to connect
  • Alpine CDE-103BT | Cde-103bt Owner's Manual (english) - Page 33
    Slide the CDE-103BT into the dashboard until it clicks. This ensures that the unit is properly locked and will not accidentally come out from the dashboard. Install the detachable front panel. Removal 1. Remove the detachable front panel. 2. Insert the bracket keys into the unit, along the guides on
  • Alpine CDE-103BT | Cde-103bt Owner's Manual (english) - Page 34
    REMOTE TURN-ON (Pink/Black) AUDIO INTERRUPT IN (Orange) (Red) (Yellow) ILLUMINATION IGNITION BATTERY (Black) GND (Gray) SPEAKER RIGHT FRONT (Gray/Black) (Violet/Black) SPEAKER RIGHT REAR (Violet) (Green) SPEAKER LEFT REAR (Green/Black) (White/Black) SPEAKER LEFT FRONT (White) To iPhone/iPod
  • Alpine CDE-103BT | Cde-103bt Owner's Manual (english) - Page 35
    Connectors RED is right and WHITE is left. MIC Input Connector To Microphone. RCA Extension Cable (sold separately) Full Speed Connector Control iPhone/iPod signals. Connect this to an iPhone/iPod by using FULL SPEED Connection Cable (KCE-433iV) (sold separately) or to an external device (such as
  • Alpine CDE-103BT | Cde-103bt Owner's Manual (english) - Page 36
    in the United States, instructions contained in the Owner's manual installation by the installation center. HOW TO CONTACT CUSTOMER SERVICE: Should the product require service, please call the following number for your nearest Authorized Alpine Service Center. CAR AUDIO NAVIGATION 1-800-ALPINE
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

Designed by ALPINE Japan
Printed in China (Y)
68-14470Z98-A
EN
FR
YAMAGATA (Wuxi) Co., Ltd.
Block 28-25, Changjiang Nanlu, WND, jiangsu, China
ES
MP3/WMA/AAC CD Receiver
CDE-103BT
OWNER’S MANUAL
Please read before using this equipment.
MODE D’EMPLOI
Veuillez lire avant d’utiliser cet appareil.
MANUAL DE OPERACIÓN
Léalo antes de utilizar este equipo.
ALPINE ELECTRONICS MARKETING, INC.
1-1-8 Nishi Gotanda,
Shinagawa-ku,
Tokyo 141-0031, Japan
Phone 03-5496-8231
ALPINE ELECTRONICS OF AMERICA, INC.
19145 Gramercy Place, Torrance,
California 90501, U.S.A.
Phone 1-800-ALPINE-1 (1-800-257-4631)
ALPINE ELECTRONICS OF CANADA, INC.
777 Supertest Road, Toronto,
Ontario M3J 2M9, Canada
Phone 1-800-ALPINE-1 (1-800-257-4631)
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
161-165 Princes Highway, Hallam
Victoria 3803, Australia
Phone 03-8787-1200
ALPINE ELECTRONICS GmbH
Wilhelm-Wagenfeld-Str. 1-3, 80807 München,
Germany
Phone 089-32 42 640
ALPINE ELECTRONICS OF U.K. LTD.
Alpine House
Fletchamstead Highway, Coventry CV4 9TW, U.K.
Phone 0870-33 33 763
ALPINE ELECTRONICS FRANCE S.A.R.L.
(RCS PONTOISE B 338 101 280)
98, Rue de la Belle Etoile, Z.I. Paris Nord Il,
B.P. 50016, 95945 Roissy Charles de Gaulle
Cedex, France
Phone 01-48638989
ALPINE ITALIA S.p.A.
Viale C. Colombo 8, 20090 Trezzano
Sul Naviglio (MI), Italy
Phone 02-484781
ALPINE ELECTRONICS DE ESPAÑA, S.A.
Portal de Gamarra 36, Pabellón, 32
01013 Vitoria (Alava)-APDO 133, Spain
Phone 945-283588
ALPINE ELECTRONICS (BENELUX) GmbH
Leuvensesteenweg 510-B6,
1930 Zaventem, Belgium
Phone 02-725-13 15
R