Alpine CDE-124SXM Owner's Manual (english) - Page 19
BLUETOOTH Setting CDE-123 only, General Setting - cd mp3 wma siriusxm receiver
UPC - 793276011138
View all Alpine CDE-124SXM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
3 Turn the Rotary encoder to select a setting item, and then press ENTER. (e.g. Select POWER IC) 4 Turn the Rotary encoder to change the setting, and then press ENTER. (e.g. Select POWER IC ON or POWER IC OFF.) 5 Press and hold AUDIOSETUP for at least 2 seconds to return to normal mode. Notes • Press to return to the previous mode. • If no operation is performed for 60 seconds, the unit will return to normal mode automatically. BLUETOOTH Setting (CDE-123 only) Select BLUETOOTH from the setup main menu in step 2 above. Setting the BLUETOOTH Connection If an optional BLUETOOTH INTERFACE is connected, you can place a hands-free call by a BLUETOOTH-equipped mobile phone. Make this setting when the BLUETOOTH INTERFACE is connected and the BLUETOOTH function is used. For details, refer to the Owner's Manual of the optional BLUETOOTH INTERFACE. Setting item: BT IN Setting contents: OFF (Initial setting) / HFP / HFP+AUDIO OFF: This option does not allow this unit to recognize connection with BLUETOOTH INTERFACE. HFP: Set this item when BLUETOOTH INTERFACE (KCE-250BT) is connected. (Hands-free Phone is available, but the BT Audio source is not displayed.) HFP+AUDIO: Set this item when BLUETOOTH INTERFACE (KCE-400BT) is connected. (Hands-free Phone is available, and BT Audio source is also available.) Notes • After the above setting, turn the ignition key off (ACC OFF) and on again (ACC ON). • The w button can be used only when the optional BLUETOOTH INTERFACE is connected. • If the mobile phone compatible with the Voice Dial function is connected, the Voice Dial function can be used. • When INT MUTE is set to ON, the BLUETOOTH setting cannot be made. When the BLUETOOTH INTERFACE is connected, set INT MUTE to OFF. Refer to "Turning Mute Mode On/Off (INT MUTE)" on page 19. General Setting GENERAL is selected on the setup main menu in step 2. Set your favorite source to the FAV button (FAV SETUP) You can select one source as your favorite source. Once this is set, you can switch to favorite source directly by pressing FAV. PANDORA F*1 PANDORA*2 PANDORA R*1 FM1 FM2 AM AUX AUX REAR*1 DISC BT AUDIO*1 SIRIUSXM*3 USB*2 USB FRONT*1 USB REAR*1 FAV OFF *1 CDE-123 only. *2 CDE-124SXM/CDE-122 only. *3 CDE-124SXM/CDE-123 only Notes • Depending on the setting, some item may not be selectable. • If you do not want to use this function, select "FAV OFF". • This setting can also be activated by pressing and holding FAV for at least 2 seconds. Playing MP3/WMA/AAC Data (PLAY MODE) This unit can play back CDs containing both CD and MP3/WMA/AAC data (created in Enhanced CD (CD Extra) format). However, in some situations, playback of an enhanced CD may be difficult. In this case, you can select playback of a single session only, containing the CD data. When a disc contains both CD and MP3/WMA/AAC data, playback starts from the CD data portion of the disc. Setting item: PLAY MODE Setting contents: CD-DA (Initial setting) / CDDA/MP3 CD-DA: Only the CD data in Session 1 can be played back. CDDA/MP3: CD data, MP3/WMA/AAC files in mixed mode, and multi-session discs can be played back. Note • Perform this setting before inserting a disc. If a disc has already been inserted, remove it first. Turning Mute Mode On/Off (INT MUTE) If a device having the interrupt feature is connected, audio will be automatically muted whenever the interrupt signal is received from the device. Setting item: INT MUTE Setting contents: OFF AUX (Initial setting) / OFF AUX-R (CDE-123 only) / ON OFF AUX: When the interrupt signal is received from device, the AUX source volume will be output from the unit. OFF AUX-R (CDE-123 only): When the interrupt signal is received from device, the AUX REAR source volume will be output from the unit. ON: When the interrupt signal is received from device, no sound will be output. Setting the AUX REAR Setup Mode (AUX-R SET) (CDE-123 only) You can input the audio of an external device, (such as a Portable audio player) to the BLUETOOTH interface connector of this unit. A special Conversion cable (KCE-237B) is necessary to adapt the BLUETOOTH interface connector as an AUX IN. A portable music device and a BLUETOOTH INTERFACE cannot be connected to the BLUETOOTH interface connector at the same time. Setting item: AUX-R SET Setting contents: ON / OFF (Initial setting) ON*: Set to ON when a portable device is connected. If SOURCE is pressed and AUX REAR is selected, the sound of the portable device is input to the unit. * You can change the AUX-R NAME display when AUX-R SET is set to ON. Press ENTER when AUX-R SET is set to ON, and select AUX-R NAME by turning the Rotary encoder, then press ENTER. After that, turn the Rotary encoder to select the desired AUX-R NAME. 19-EN