Alpine CDE-124SXM Owner's Manual (english) - Page 9

Getting Started SOURCE/ Rotary encoder/ /ENTER AUDIO/SETUP FAV    FUNC./VIEW BAND/ F/R * The illustration is for CDE-123. Accessory List • Head Unit 1 • Power Cable 1 • USB Cable (CDE-123 only 1 • Interface cable for iPod (CDE-123 only 1 • SiriusXM Tuner (CDE-124SXM only 1 • Mounting Sleeve 1 • Carrying Case 1 • Bracket key 2 • Screw (M5 × 8 4 • Owner's Manual 1 set *4 The Pandora source can be displayed only when PANDORA is set to ON. For details, refer to "Setting the Pandora Source" on page 22. For CDE-123, during PANDORA F source, you can switch to PANDORA R source by pressing BAND/F/R; for CDE-124SXM/CDE-122, the source name is PANDORA. *5 Displayed only when BT IN is set to HFP+AUDIO, refer to "Setting the BLUETOOTH Connection" on page 19. (CDE-123 only) *6 Refer to "Using the Front AUX Input Terminal" on page 17. For CDE-123, during AUX source, you can switch to AUX REAR source by pressing BAND/F/R when ON is set in "Setting the AUX REAR Setup Mode (AUX-R SET)" (refer to "Setting the AUX REAR Setup Mode (AUX-R SET) (CDE-123 only)" on page 19). Note • You can recall your favorite source by pressing FAV directly. For details, refer to "Set your favorite source to the FAV button (FAV SETUP)" on page 18. Detaching and Attaching the Front Panel Detaching 1 Turn off the unit power. 2 Press e (Release) at the lower left side until the front panel pops out. 3 Grasp the left side of the front panel and pull it out. Turning Power On and Off Press SOURCE to turn on the unit. Note • The unit can be turned on by pressing any other button except  and e (Release). Press and hold SOURCE for at least 2 seconds to turn off the unit. Note • The first time power is turned on, the volume will start from level 12. Source Selection Press SOURCE to change the source. TUNER  SIRIUSXM*1  DISC  USB FRONT*2/iPod FRONT*3  PANDORA F*4  BT AUDIO*5  AUXILIARY*6  TUNER *1 Displayed only when a SiriusXM Tuner is connected. (CDE-124SXM/CDE-123 only) *2 Displayed only when no iPod/iPhone is connected. For CDE-123, during USB FRONT source, you can switch to USB REAR source by pressing BAND/F/R; for CDE-124SXM/ CDE-122, the source name is USB AUDIO. *3 Displayed only when the iPod/iPhone is connected. For CDE-123, during iPod FRONT source, you can switch to iPod REAR source by pressing BAND/F/R; for CDE-124SXM/ CDE-122, the source name is iPod. Notes • The front panel may become hot in normal usage (especially the connector terminals on the back of the front panel). This is not a malfunction. • To protect the front panel, place it in the supplied carrying case. • When detaching the front panel, do not apply excessive force as it may result in malfunction. Attaching 1 Insert the right side of the front panel into the main unit. Align the groove on the front panel with the projections on the main unit. 2 Push the left side of the front panel until it locks firmly into the main unit. 9-EN