Alpine CDE-125BT Owner's Manual (english) - Page 10

Presetting Stations Automatically 1 Press BAND repeatedly until the desired radio band is displayed. 2 Press and hold TUNE/A.ME for at least 2 seconds. The frequency on the display continues to change while the automatic memory is in progress. The tuner will automatically seek and store 6 strong stations in the selected band. They will be stored into preset buttons 1 to 6 in order of signal strength. When the automatic memory has been completed, the tuner goes to the station stored in preset location No.1. • If no stations are stored, the tuner will return to the original station you were listening to before the auto memory procedure began. Tuning to Preset Stations 1 Press BAND repeatedly until the desired band is displayed. 2 Press any one of the station preset buttons (1 through 6) that has your desired radio station in memory. The display shows the band, preset number and frequency of the station selected. CD/MP3/WMA/AAC SOURCE/ Rotary encoder /MUTE 1 2 45 / /ENT /ESC VIEW Playback The following table shows which discs can be played on which models. CD CD-TEXT MP3 WMA AAC CDE-126BT CDE-125BT 1 Insert a disc with the label side facing up. The disc will be pulled into the unit automatically, and the " " indicator lights up . When a disc is already inserted, press SOURCE/ to switch to the DISC mode. The mode will change every time the button is pressed. TUNER DISC USB AUDIO iPod*1/AUX+*2 AUX*3 TUNER *1 Displayed only when the iPod/iPhone is connected and AUX+ SETUP is set to OFF, refer to "Setting the AUX+ SETUP Mode" (page 19). *2 Displayed only when the AUX+ SETUP is set to ON, refer to "Setting the AUX+ SETUP Mode" (page 19). *3 Refer to "Using the Front AUX Input Terminal" (page 16). 2 While playing back MP3/WMA/AAC, press 1 or 2 to select the desired folder. Pressing and holding 1 or 2 will change folders continuously. 10-EN