Alpine CDE-125BT Owner's Manual (english) - Page 21

Displaying the phone service provider name Setting item : SEV NAME The service provider name of the connected BLUETOOTH compatible device will be displayed. If a BLUETOOTH compatible device is not connected, "ID UNSENT" will also be displayed. • Depending on the character type some phone service provider name cannot be displayed. "ID UNSENT" will also be displayed. Adjusting the volume for the microphone input You can emphasize or weaken the microphone input volume level. Setting item : MIC INPUT Turn the Rotary encoder to select the desired volume level (0~7). • The setting cannot be adjusted during a phone call. Adjust the setting before placing a call. Selecting the output speaker You can select the connected speaker in car to output the sound signal of telephone. Setting item : SPEAKER SL ALL: The sound be output from all of speakers in car. F-L: The sound only be output from the front left speaker. F-R: The sound only be output from the front right speaker. F-LR: The sound be output from the front left and front right speaker. • The setting cannot be adjusted during a phone call. Adjust the setting before placing a call. Displaying the firmware version Setting item : FW VERSION The current firmware version will be displayed. Updating the firmware Setting item: FW UPDATE With this setting, the BLUETOOTH firmware update function can be activated, but other devices and software may be required. For details, consult ALPINE website. Hands-Free Phone Control About the Hands-Free Phone Hands-free calls are possible when using a HSP (Head Set Profile) and HFP (Hands-Free Profile) compatible mobile phone with this unit. • Avoid answering a hands-free call in heavy traffic or on narrow or winding streets. • Close the windows while calling to reduce background noise. • If both calling parties are using hands-free devices, or the call is made in a noisy location, difficulty hearing the other person's voice is normal. • Depending on telephone line conditions or certain mobile devices used, voices may sound unnatural. • When using a microphone, speak as directly as you can into the microphone to pick up the best sound quality. • Certain mobile phone features are dependent on the capabilities and settings of your service provider's network. Additionally, certain features may not be activated by your service provider, and/or the provider's network settings may limit the feature's functionality. Always contact your service provider about feature availability and functionality. All features, functionality, and other product specifications, as well as the information contained in the Owner's Manual are based upon the latest available information and are believed to be accurate at the time of printing. Alpine reserves the right to change or modify any information or specifications without notice or obligation. Answering a Call Incoming calls are announced by the received call ring tone and a displayed message (PHONE). Press . The call starts. • When "Setting the Received Calls automatically (Auto Answer)" (page 20) is set to AT ANS ON, you can receive a call automatically. • While calling, the source sound on the unit is muted. After calling, playback will resume. Hanging up the Telephone Press and hold for at least 2 seconds. The call finishes. • While receiving you can also hang up by pressing . Redial Function You can redial the person you have previously called. After finishing a call will be displayed, press within 5 seconds. The telephone is redialed. • If you receive a call from an unknown number, you cannot use the redial function to call back. 21-EN