Alpine INA-W900BT Owner's Manual (English) - Page 47
Search Function, Adjusting H.P.F. Highpass Filter
UPC - 793276100276
View all Alpine INA-W900BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
B Adjusting the Balance Touch [L] or [R] to adjust the sound volume of the left and right speakers. Setting range: L15 to R15 C Adjusting the Balance/Fader Directly Touch and move [ ] to a desired setting. Or touch a desired setting range, and [ ] will move to that location. Touch [L] or [R] of Balance and [F] or [R] of Fader for fine-tuning. Turning Defeat ON or OFF Touch [ ] to display the Defeat adjusting screen. Touch [ ] or [ ] of Defeat to set to ON or OFF. If you set the Defeat to ON, MX of the optional IMPRINT audio processor (PXA-H100) is turned OFF and EQ is returned to the initial setting. Adjusting Nav. Mix Level Touch [ ] or [ ] of Nav. Mix LEVEL to adjust the volume of navigation interruption. Setting range: 0 to 15 Adjusting the Subwoofer Level Touch [ ] or [ ] of Subwoofer to set the subwoofer ON/ OFF. Touch [ ] to display the Subwoofer output adjusting screen after setting the Subwoofer to ON. Touch [ ] or [ ] to adjust the Subwoofer output. Setting range: 0 to 15 • The Subwoofer System, Subwoofer Phase and Subwoofer Channel may be set when an optional IMPRINT audio processor (PXA-H100) is connected. For details, refer to "Setting the Subwoofer" on page 61. Adjusting H.P.F. (Highpass Filter) Touch [ ] to display the H.P.F. adjusting screen. Touch [ ] or [ ] of the desired speaker. Setting range: OFF, 80 Hz, 120 Hz, 160 Hz • Select OFF when no adjustment is required. • When an IMPRINT audio processor (PXA-H100) is connected, the display changes from "H.P.F." to the "A.Processor" item. For details on operation, refer to "IMPRINT Operation (Optional)" on page 58. Adjusting Bass/Treble You can change the bass/treble frequency emphasis to create your own tonal preference. Touch [ ] to display the Bass/Treble adjusting screen. Touch [ ] or [ ] on the scroll bar to scroll the setup items line by line. • Adjustment cannot be performed when an IMPRINT audio processor (PXA-H100) is connected or Defeat is set to ON. Setting the Bass level You can emphasize or weaken the bass frequency. Touch [ ] or [ ] of Bass Level to select the desired bass level. Setting range: -7 to +7 Setting the Bass Center Frequency The displayed bass frequency is emphasized. Touch [ ] or [ ] of Bass Freq. to select the desired bass center frequency. Setting range: 60 Hz, 80 Hz, 100 Hz, 200 Hz Setting the Bass Bandwidth Changes the boosted bass bandwidth to wide or narrow. A wider setting will boost a wide range of frequencies above and below the center frequency. A narrower setting will boost only frequencies near the center frequency. Touch [ ] or [ ] of Bass Bandwidth to select the desired bass band width. Setting range: Wide1 to Wide4 • The bass level settings will be individually memorized for each source (FM, AM, CD, etc.) until the setting is changed. The bass frequency and bass bandwidth settings adjusted for one source are effective for all other sources (FM, AM, CD etc.). Setting the treble level You can emphasize the treble frequency. Touch [ ] or [ ] of Treble Level to select the desired treble level. Setting range: -7 to +7 Setting the Treble Center Frequency The displayed treble frequency is emphasized. Touch [ ] or [ ] of Treble Freq to select the desired treble center frequency. Setting range:10 kHz, 12.5 kHz, 15 kHz, 17.5 kHz • The treble level settings will be individually memorized for each source (FM, AM, CD, etc.) until the setting is changed. The Treble frequency settings adjusted for one source are effective for all other sources (FM, AM, CD, etc.). Setting the Loudness Loudness introduces a special low- and high-frequency emphasis at low listening levels. This compensates for the ear's decreased sensitivity to bass and treble sound. Touch [ ] or [ ] of Loudness to set to ON or OFF. • This adjustment cannot be performed when an optional IMPRINT audio processor (PXA-H100) is connected. Search Function Touch [ ] on the function guide while in the CD or MP3/ WMA/AAC mode. Search list screen is displayed. Select a desired track or folder Touch [ ] for direct playback. When a hierarchical list is prepared, [ ] will be displayed. Touch [ ] to display the respective hierarchy list screens. 45-EN