Alpine INA-W900BT Owner's Manual (English) - Page 51

Set the rating level of PARENTAL 4 Touch [ ] of Parental to turn on. 5 Touch [ ] or [ ] of Parental Level to select the rating level (1 to 8). Select "OFF" to cancel the parental lock or if you do not want to set a rating level. The smaller the number, the higher the rating level. 6 Touch [ ] to return to the previous screen. Changing the password 4 Touch [Input] of Password Change. The numeric keypad screen is displayed. 5 Touch the input screen to enter a new 4-digit password. • Keep a note of the number somewhere safe in case you should forget it. 6 Touch [Enter] to memorize the number. 7 Touch [ ] to return to the previous screen. Changing the rating level temporarily Some discs may request that you change the rating level set in the default settings during playback. In this case, the message appears on the monitor screen "Parental Level Change OK? [YES] [NO]." If this screen appears, change the level as follows: • To change parental level and play, touch [YES]. When [YES] is touched, the numeric keypad input screen is displayed. Input the 4-digit password in "Setting the Rating Level (Parental Lock)" you set, then touch [ENT]. • To play without changing the parental level, touch [NO]. (When [NO] is touched, playback will be at the parental level set in "Setting the Rating Level (Parental Lock).") Setting the Downmix Mode This function applies to Dolby Digital, DTS stream sound. Setting item: Downmix Mode Setting contents: Surround / Stereo Surround: Surround compatible Downmix Stereo: Stereo Downmix 4:3 LETTER BOX: Select this when connected to a conventional 4:3 size (normal TV aspect ratio) monitor. There may be black stripes visible at the top and bottom of the screen (when playing a 16:9 size movie). The width of these stripes will depend upon the original aspect ratio of the theatrical release of the movie. 4:3 PAN-SCAN: Select this when connected to a conventional 4:3 size monitor. The picture will fill the entire TV screen. However, due to the mismatch in aspect ratio, parts of the movie at the extreme left and right sides will not be visible (when playing a 16:9 size movie). 16:9 WIDE: Select this when connected to a wide screen TV. This is the factory setting. Setting the TV Screen Mode Use the procedure described below to modify the output screen according to the type of TV monitor (rear monitor) being used. This setting can also be applied for the INA-W900. If the rear monitor is not connected, the screen setting is 16:9. Setting item: TV Screen Setting contents: 4:3 LB / 4:3 PS / 16:9 • For some discs, the picture may not be set to the selected screen size. (For details, refer to the explanation on the disc's jacket.) Playing MP3/WMA/AAC Data (File Play Mode) When using discs containing both audio data and MP3/WMA/AAC data. Setting item: File Play Mode Setting contents: CD / CMPM CD: Plays only the audio data on discs containing both audio data and MP3/WMA/AAC data. CMPM: Plays only the MP3/WMA/AAC files on discs containing both audio data and MP3/WMA/AAC data. • Insert the disc when playback is stopped and remove the disc from the unit before setting. • When an MP3-compatible CD changer is used, this setting cannot be applied. 49-EN