Alpine INA-W900BT Owner's Manual (English) - Page 55
Displaying the Time, Sound (Beep) Guide Function, Setting the Scroll - navigation update
UPC - 793276100276
View all Alpine INA-W900BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Displaying the Time The clock indication on the monitor display is turned on or off respectively. Setting item: Clock Setting contents: OFF / ON • The clock of the unit will be automatically updated according to the data that the Navigation System provides, and cannot be adjusted manually. • If the GPS antenna is not connected correctly, the clock indication on the unit may be wrong because the time information cannot be received. In this case, it is suggested to set "Clock" to "OFF". Sound (Beep) Guide Function Setting item: Beep Setting contents: OFF / ON OFF: Deactivate the Sound Guide mode. The sound guide beep will not be produced when a button on the unit is pressed. ON: Activate the Sound Guide mode. Setting the Scroll Scroll display is available if CD text, folder name, file name or tag information is entered. Setting item: Auto Scroll Setting contents: OFF / ON OFF: Turns off the AUTO scroll mode. Scroll display is done once as a track is changed. ON: Turns on the AUTO scroll mode. Scroll display is repeated as long as the mode is turned on. • The display scrolls on the unit when the screen is filled up. • Song, artist and album name, etc. scrolls when an iPhone/iPod is connected. • Short/Long Station name, Song, Artist, and album name scrolling are displayed in HD Radio mode. Adjusting the Dimmer of Button Lighting at Night You can adjust the brightness of the button lighting at night with the dimmer. Setting item: LED Dimmer Level Setting level: -2 to +2 SYSTEM Setup System Setup Operation To display the System mode screen: To watch a video source, your vehicle must be parked with the ignition key in the ACC or ON position. To do this, follow the procedures below. 1 Bring your vehicle to a complete stop at a safe location. Engage the parking brake. 2 Keep pushing the foot brake and release the parking brake once then engage it again. 3 When the parking brake is engaged for the second time, release the foot brake. • For automatic transmission vehicles, place the transmission lever in the Park position. Now, the locking system for the System mode operation has been released. Engaging the parking brake can reactivate the System mode, as long as the car's ignition has not been turned off. It is not necessary to repeat the above procedure (1 through 3) of "To display the System mode screen." Each time the ignition is turned OFF, perform the procedure of "To display the System mode screen." The following steps 1 to 5 are common operations to each "Setting item" of SYSTEM Setup. Refer to each section for details. 1 Press SOURCE/ on the unit. The SOURCE selection screen is displayed. 2 Touch [ ] on the main source screen. The SETUP main screen is displayed. 3 Touch [ ] of System Setup. The System Setup screen appears. 4 Touch [ ] or [ ] etc., of the desired item to change its setting. Setting items: IN Int. Mute*1 / IN Int. Icon / Remote Sensor*2 / Camera IN / AUX IN / AUX IN Level*3 / AUX IN Signal*3 / AUX OUT / BLUETOOTH IN / AUX+ IN / AUX+ Level*4 / Rear Source*2 *1 Displayed only when BLUETOOTH IN is OFF. *2 Displayed only when AUX OUT is ON. *3 Not displayed when OFF is set in "Setting the AUX Mode" (page 55). *4 Not displayed when OFF is set in "Setting the AUX+ Mode" (page 55). 5 Touch [ ] to return to the previous screen. Touch [Exit] to return to the main source screen that was displayed before the setup operation was started. • Immediately after changing the settings of System Mode (while the system is writing data automatically) do not turn the ignition key (engine key) to OFF. Otherwise, the settings may not be changed. 53-EN