Alpine INA-W900BT Owner's Manual (English) - Page 72

Rearview Camera Changer Operation (Optional) (Optional) When the optional rearview camera HCE-C107D, etc. is connected, rear view video can be output to the monitor. • A rearview camera with RCA Output connector cannot be connected to this unit. • Be sure to set "Camera IN" to ON before using the rearview camera, refer to "Setting the Rear Camera Input" on page 54. Switching the Rear Camera Screen (Optional) The rear view video will be displayed for the two situations as below. Displaying the rear view video while the car is in reverse 1 Shift the gear lever to the reverse (R) position. The rear view image is displayed while the car remains in reverse. 2 If you shift the gear lever to a position other than reverse (R), the monitor returns to the previous screen. • Be sure to also check behind the car visually. Use the camera image to assist in showing conditions behind the car. • This function is effective when the reverse wire is properly connected. Displaying the rear view video manually 1 Press SOURCE/ on the unit. The SOURCE selection screen is displayed. 2 Touch (CAMERA). The Camera mode is activated and the rear view video is displayed. 3 Touch [Guide On] or [Guide Off] to set whether the rear camera guide line is displayed. Touch [ ] to return to the previous screen. Controlling CD Changer (Optional) An optional 6-disc or 12-disc CD Changer may be connected to the INA-W900 if it is Ai-NET compatible. With a CD Changer connected to the Ai-NET input of the INA-W900, the CD Changer will be controllable from the INA-W900. If you connect a changer compatible with MP3, you can play CD-ROMs, CD-Rs, and CD-RWs containing MP3 files on the INA-W900. Using the KCA-410C (Versatile Link Terminal) multiple changers can be controlled by the INA-W900. See the Multi-Changer Selection section for selecting the CD Changers (explained on page 71). 1 Press SOURCE/ on the unit. The SOURCE selection screen is displayed. 2 Touch [CD CHG.]. The display changes to the CD changer mode screen. When a 6 Disc CD Changer is connected; 1 Touch [P1/2]*. The Function Guide display appears. * When an MP3 compatible CD changer or DVD changer is connected, touch repeatedly until the disc number is displayed. 2 Touch any one of the select buttons [DISC 1] through [DISC 6]. DISC 1 through DISC 6 select the discs from the first disc to 6th disc. When an MP3 compatible CD changer is connected; 1 Touch [P1/3] twice to change the Function Guide display. 2 Touch any one of the select buttons [DISC 1] through [DISC 6]. DISC 1 through DISC 6 select the discs from the first disc to 6th disc. When a 12-Disc CD Changer is connected; You can select the disc numbers 1 to 6 in the same manner as for 6-disc Changer. Touch [P1/3] twice to select disc numbers 7 to 12. The function guide display changes so that DISC 7 through DISC 12 represent disc numbers 7 to 12. • After selecting the desired disc, you can operate in the same way as for the CD player. For details, see the CD/MP3/WMA/AAC section. • When an MP3 compatible CD changer is connected, the unit can play discs containing both audio data and MP3 data. • The DVD changer (optional) is controllable from the INA-W900 as well as the CD changer. 70-EN