Alpine INA-W900BT Owner's Manual (English) - Page 88

Indication for CD changer • Button operation on the unit or remote control is not possible. - For some discs or playing modes, certain operations are not possible. This is not a malfunction. • Protective circuit is activated due to high temperature. - The indicator will disappear when the temperature returns to within operation range. • Disc does not match regional code number. - Load a disc that matches the regional code number. • Mechanism error. 1) Touch [Eject] of Disc on the Eject/Tilt screen and eject the disc. If not ejecting, consult your Alpine dealer. 2) When the error indication remains after ejecting, touch [Eject] of Disc on the Eject/Tilt screen again. If the error indication still does not turn off after touching [Eject] of Disc on the Eject/Tilt screen for a few times, consult your Alpine dealer. • Malfunction in the CD Changer. - Consult your Alpine dealer. Press the magazine eject button and pull out the magazine. Check the indication. Insert the magazine again. If the magazine cannot be pulled out, consult your Alpine dealer. • Magazine ejection not possible. - Press the magazine eject button. If the magazine does not eject, consult your Alpine dealer. • A disc is left inside the CD Changer. - Press the eject button to activate the eject function. When the CD Changer finishes the eject function, insert an empty CD magazine into the CD Changer to receive the disc left inside the CD Changer. • Scratched disc, contaminated disc/poor recording/disc incompatible with this unit. - Touch [Eject] of Disc on the Eject/Tilt screen. - Change the disc. • No magazine is loaded into the CD Changer. - Insert a magazine. • The DVD setup operation was attempted when a disc is inserted in the unit. - Eject the disc before the DVD setup operation. • No indicated disc. - Choose another disc. 86-EN