Alpine INA-W910 Owner's Manual (english) - Page 83

BLUETOOTH Operation • BT Audio source is not available with this unit. Setup Before Using About BLUETOOTH BLUETOOTH is a wireless technology allowing communication between a mobile device or personal computer over short distances. This enables a hands-free call or data transmission between BLUETOOTH compatible devices. BLUETOOTH transmission is available in the unlicensed 2.4 GHz spectrum if the distance between devices is within 10 meters. For details, refer to the BLUETOOTH Home page (http://www.bluetooth.com). • Depending on the BLUETOOTH version, a BLUETOOTH compatible device may not be able to communicate with this unit. • Proper function of this unit with all BLUETOOTH compatible devices is not guaranteed. For handling of the BT compatible device, consult your ALPINE dealer or ALPINE website. • Depending on the surroundings, BLUETOOTH wireless connection may be unstable. • When you place a call, or perform setup operations, be sure to stop your car in a safe place. • Depending on the connected BLUETOOTH compatible device(s), the function may differ. Also refer to the Owner's Manual of the connected device(s). Before Using Hands-Free Function Before using a hands-free phone function, the following setting need to be made. Set "BLUETOOTH IN" to ON (page 67). • Before using a hands-free phone, it must be paired with this unit. Refer to "BLUETOOTH Setup" (pages 83-85). How to connect to a BLUETOOTH compatible device (Pairing) For details on the control from a BLUETOOTH compatible device, refer to the Owner's Manual of the BLUETOOTH compatible device. 1 Set a BLUETOOTH connection from a BLUETOOTH compatible device. 2 The PIN code ("0000") is displayed on the unit. 3 Input the PIN code ("0000") in a BLUETOOTH compatible device. 4 If this unit is successfully connected to a BLUETOOTH compatible device, "Connected/ (Device name)" is displayed, and then the unit returns to normal mode. • Set "Setting the Search Mode" (page 84) to Visible Mode ON to enable this unit to recognize a mobile phone. For mobile phone passkey (passcode) input operation, refer to the mobile's Owner's Manual. Additionally, the mobile phone can be searched directly from this unit. Refer to "Registering the BLUETOOTH Device" (page 84). • If a BLUETOOTH compatible device is successfully connected, the next time when the ignition key of the car is turned to on, the unit will automatically connect to the previously connected device. However, the connection may fail. If the auto connection fails, try the connection manually. BLUETOOTH Setup BLUETOOTH Setup Operation The following steps 1 to 6 are common to the various BLUETOOTH functions. For details, refer to each individual function. • While calling, BLUETOOTH Setup operation cannot be performed. • Set "BLUETOOTH IN" to ON (page 67), and then perform BLUETOOTH Setup operation. 1 Press SOURCE/ on the unit. The SOURCE selection screen is displayed. 2 Touch [ ] on the main source screen. The Setup Select screen is displayed. 3 Touch [ ] of Source Setup. The Source Setup screen appears. 4 Touch [ ] of BLUETOOTH Setup. The BLUETOOTH Setup screen appears. 5 Touch [ ], [ ] or [ ] of the desired item to change its setting. Setting items: Paired Devices / Device Search / Clear Device / Service Provider / Visible Mode / Auto Answer / Speaker Select / MIC Input / Firmware Version / Firmware Update / Echo Cancel / Navi Voice IN Call / Shortcut Memory 6 Touch [ ] on the left side of screen to return to the previous screen. Touch [Exit] to return to the main source screen that was displayed before the setup operation was started. 83-EN