Alpine INE-S920HD Owner's Manual (english) - Page 103
For INE-S920HD/INE-NAV-30, Slide the INE-S920HD/INE-NAV-30 into
View all Alpine INE-S920HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
4 Mounting the Microphone. For safe use, make sure of the following: • location is stable and firm. • driver's view and operations are not obstructed. • microphone is located where the driver's voice can be easily picked up (on the sun visor, etc.). When you speak into the microphone, you should not have to change your driving posture. This may cause a distraction, taking your attention away from safely driving your vehicle. Carefully consider direction and distance while mounting the microphone. Confirm that the driver's voice can be easily picked up at the selected location. 6 Reinforce the head unit with the metal mounting strap (not supplied). Secure the ground lead of the unit to a clean metal spot using a screw (*1) already attached to the vehicle's chassis. Connect all the leads of the INE-S920HD/INE-NAV-30 according to details described in the CONNECTION section. Hex Nut (M5) Screw *2 Bolt Stud Cable clamp (Sold separately) Microphone For INE-S920HD/INE-NAV-30 5 Remove the mounting sleeve from the main unit (see "Removal" on page 103). Slide the unit into the mounting sleeve and secure it. Mounting Sleeve (Included) Dashboard This unit Metal Mounting Strap *1 Ground Lead Chassis This unit • For the screw marked "*2," use an appropriate screw for the chosen mounting location. 7 Slide the INE-S920HD/INE-NAV-30 into the dashboard until it clicks. This ensures that the unit is properly locked and will not accidentally come out from the dashboard. Removal 1. Insert the bracket keys into the unit, along the guides on either side. The unit can now be removed from the mounting sleeve. This unit Pressure Plates*1 Face Plate*2 (Included) Bracket keys (Included) 2. Pull the unit out, keeping it unlocked as you do so. *1 If the installed mounting sleeve is loose in the dashboard, the pressure plates may be bent slightly to remedy the problem. *2 The supplied face plate may be mounted. 103-EN