Alpine INE-S920HD Owner's Manual (english) - Page 20

Initial System Start-Up, Inserting/Ejecting a Disc, Inserting the Disc, Removing the Disc - reset

Page 20 highlights

Initial System Start-Up Be sure to press the RESET switch when using the unit for the first time, after changing the car battery, etc. 1 Turn off the unit power. 2 Press (Release) to remove the front panel. 3 Press RESET with a ballpoint pen or similar pointed object. RESET switch Adjusting the Volume Rotate the Rotary encoder until the desired sound is obtained. Volume: 0 - 35 Lowering Volume Quickly Activating the Audio Mute function will instantly lower the volume level by 20 dB. 1 Press Rotary encoder to activate the MUTE mode. The audio level will decrease by about 20 dB. 2 Pressing Rotary encoder again will bring the audio back to its previous level. microSD memory card slot* * The microSD memory card does not support Music/Video playback. For details on how to use microSD memory cards, refer to "Navigation system OM" on the supplied CD-ROM. Inserting/Ejecting a Disc Inserting the Disc 1 Insert the disc with the label side facing up. Disc Slot When you insert the disc up to certain point, it is automatically pulled into the unit. The unit starts to play the disc. • Do not touch the surface of the disc directly with your fingers. • Before inserting or removing the disc, always turn the ignition key to ACC or ON. You cannot remove or insert the disc with the ignition key turned to OFF. Removing the Disc 1 Press (Eject). When the disc has been ejected part way, take it out. • If the disc cannot be ejected by pressing , press and hold again for at least 5 seconds. 20-EN

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116

20
-EN
Initial System Start-Up
Be sure to press the RESET switch when using the unit for the first
time, after changing the car battery, etc.
1
Turn off the unit power.
2
Press
(Release) to remove the front panel.
3
Press
RESET
with a ballpoint pen or similar pointed
object.
*
The microSD memory card does not support Music/Video playback.
For details on how to use microSD memory cards, refer to
“Navigation system OM” on the supplied CD-ROM.
Inserting/Ejecting a Disc
1
Insert the disc with the label side facing up.
When you insert the disc up to certain point, it is
automatically pulled into the unit. The unit starts to play the
disc.
Do not touch the surface of the disc directly with your fingers.
Before inserting or removing the disc, always turn the ignition key to
ACC or ON. You cannot remove or insert the disc with the ignition
key turned to OFF.
1
Press
(Eject).
When the disc has been ejected part way, take it out.
If the disc cannot be ejected by pressing
, press and hold
again
for at least 5 seconds.
Adjusting the Volume
Rotate the
Rotary encoder
until the desired sound is
obtained.
Volume: 0 - 35
Lowering Volume Quickly
Activating the Audio Mute function will instantly lower the volume
level by 20 dB.
1
Press Rotary encoder to activate the MUTE mode.
The audio level will decrease by about 20 dB.
2
Pressing Rotary encoder again will bring the audio
back to its previous level.
Inserting the Disc
Removing the Disc
RESET switch
microSD memory card slot
*
Disc Slot