Alpine INE-S920HD Owner's Manual (english) - Page 43
Format settings, Setting the Menu Language, Remote Sensor Setting
View all Alpine INE-S920HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Format settings The character code to be used for tag text information displayed on the screen can be selected from 7 character codes. Setting item: Format Sel. Setting contents: EU1 / EU2 (Initial setting) / RUS / CHI / THA / ARA EU1: ISO 8859-1 EU2: ISO 8859-15 RUS: ISO 8859-5 CHI: GB18030 THA: CP874 ARA: CP1256 Setting the Menu Language The Setup menu, feedback information, etc. for this unit can be changed to appear in the selected language. Setting item: Language Sel. Setting contents: English / German / French / Spanish / Portuguese / Italian / Dutch / Finnish / Norwegian / Swedish / Russian / Thai / Arabic / Chinese / Other languages (Czech / Danish / Greek / Hungarian / Polish / Slovak / Turkish) • Touch [OK] to confirm the language and display the screen in the specified language. Remote Sensor Setting [Remote Sensor] is selected on the General setup menu in step 3. Refer to "General Setup Operation" (page 42). For remote control operation, the remote sensor of the external device (monitor, etc.) can be switched, as you prefer. Setting item: Remote Sensor Setting contents: Front (Initial setting) / Rear Front: Rear: The remote sensor of this unit is effective. The remote sensor of the external monitor connected to AUX OUTPUT of this unit becomes effective. The remote control operates the source connected to the AUX OUTPUT terminals. • If the RSE (page 57) is "Off," the setting is not displayed. Setting Top banner and Bottom banner Display [Top/Bottom Banner Fade Out] is selected on the General setup menu in step 3. Refer to "General Setup Operation" (page 42). You can configure the display setting for the Top banner and Bottom banner for the audio/visual source. Setting item: Top/Bottom Banner Fade Out Setting contents: Off (Initial setting) / On Off: Always displayed On: Fade out after 5 seconds if no operations performed Screen/LED Customize Touch [Screen/LED Customize] on the General setup menu in step 3. Refer to "General Setup Operation" (page 42). Setting the Brightness of the Backlighting Backlighting is provided by a fluorescent light built into the liquid crystal panel. The illumination control adjusts the brightness of the backlighting based on the car ambient lighting for easier viewing. Setting item: Dimmer Setting contents: Auto (Initial setting) / On / Off Auto: On: Off: Adjust the brightness of the background illumination of the monitor automatically to the brightness of the car interior. Keep the background illumination of the monitor dark. Deactivate Auto Dimmer mode to keep the background illumination of the monitor bright. • When "Auto" or "On" is set, the setting is also applied for the button lighting in "Adjusting the Dimmer of Button Lighting at Night" (page 44), and "Adjusting the Minimum Level of Backlight" (page 43). Adjusting the Minimum Level of Backlight You can adjust the brightness of the backlight. This function could be used, for instance, to change the screen brightness while traveling at night. Setting item: Screen Dimmer Level Setting content: -15 to +15 (Initial setting: 0) You can adjust the level between MIN (-15) and MAX (+15). When it reaches the minimum or maximum point, the display shows "MIN" or "MAX" respectively. 43-EN