Alpine INE-S920HD Owner's Manual (english) - Page 47
Sound Setup, Sound Setup Operation, Setting the Balance/Fader/Subwoofer, Adjusting the Balance/Fader
View all Alpine INE-S920HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Sound Setup Sound Setup Operation To display the Sound Setup Menu screen: Your vehicle must be parked with the ignition key in the ACC or ON position. To do this, follow the procedures below. 1 Bring your vehicle to a complete stop at a safe location. Engage the parking brake. 2 Keep pushing the foot brake and release the parking brake once then engage it again. 3 When the parking brake is engaged for the second time, release the foot brake. • For automatic transmission vehicles, place the transmission lever in the Park position. Now, the locking system for the Sound mode operation has been released. Engaging the parking brake can reactivate the Sound Setup Menu, as long as the car's ignition has not been turned off. It is not necessary to repeat the above procedure (1 through 3) of "To display the Sound mode screen." Each time the ignition is turned OFF, perform the procedure of "To display the Sound mode screen." The following steps 1 to 5 are common operations to each "Setting item" of Sound Setup. Refer to each section for details. 1 Touch [Setup] icon of Top banner. The Setup main screen is displayed. 2 Touch [Sound]. The Sound Setup screen appears. 3 Select the desired item. Setting items: Balance / Fader / Subwoofer / Media Xpander / Bass Max EQ / Parametric EQ / Time Correction / X-OVER / Defeat / Volume / Source Volume Setup 4 Touch [ ] or [ ] etc., to change its setting. • When the pop-up window for setup is displayed, touch [ ] to close the window after setting. 5 Touch [ ] to return to the previous screen. • Immediately after changing the Sound Setup (while the system is writing data automatically) do not turn the ignition key to OFF. Otherwise, the settings may not be changed. • For details on how to scroll through the list, refer to "Selecting an Item in a List" (page 29). Setting the Balance/Fader/Subwoofer [Balance/Fader/Subwoofer] is selected on the Sound setup menu in step 3. Refer to "Sound Setup Operation" (page 47). Image area Adjusting the Balance/Fader Touch the desired point within the image area. Or touch Balance: L15 to R15 Fader: F15 to R15 Rear Speaker Setting You can set the rear speaker output to "Off." Setting item: Rear Speaker Setting contents: On (Initial setting) / Off • Note that if you select "Off" when the Rear Speaker Position in Car Specific Sound Setup is set to "Rear Deck" or "Rear Door/Panel," the setting in Car Specific Sound Setup will be canceled. Turning Subwoofer ON/OFF If an optional subwoofer is connected to the unit, make the following setting. Setting item: SubW. Setting contents: On / Off (Initial setting: Off) • Note that if you select "Off" when Subwoofer Installed in Car Specific Sound Setup is set to "Yes," the setting in Car Specific Sound Setup will be canceled. 47-EN