Alpine INE-S920HD Owner's Manual (english) - Page 49
Adjusting the Parametric Equalizer Curve (Parametric EQ)
View all Alpine INE-S920HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Adjusting the Parametric Equalizer Curve (Parametric EQ) [Parametric EQ] is selected on the Sound setup menu in step 3. Refer to "Sound Setup Operation" (page 47). You can modify the Equalizer settings to create a response curve more appealing to your personal taste. Setting item: Parametric EQ 1 Adjust the Parametric EQ to your preference. Adjusting the Band Touch [Band] to select the band to be adjusted. Band1 Band2 ··· Band8 Band9 Setting the Bandwidth Touch [ ] or [ ] of "Q Adjust" to select the bandwidth. Setting contents: 1 (Initial setting) / 2 / 3 2 To adjust another band, repeat step 1, and adjust all bands. 3 To store the adjusted setting value, touch and hold [Preset1], [Preset2], or [Preset3] for at least 2 seconds. • Settings exceeding the frequency of adjacent bands are not available. • While adjusting the Parametric EQ, you should consider the frequency response of the connected speakers. • When the parametric EQ is adjusted, the adjustment for Bass Max EQ becomes ineffective. • When Bass Max EQ is set, the interlinked Parametric EQ settings are also changed. We recommend storing Parametric EQ settings in the Preset in advance. • Touch [Flat] to initialize all values. • The Parametric EQ setting can be configured when Defeat is "Off." Calling the Parametric EQ adjusted value Calling the pre-set Parametric EQ adjusted value. Touch [Preset1], [Preset2], or [Preset3] on the Parametric EQ screen. The setting stored in the Preset will be recalled. • You can select a band directly by touching the screen. Adjusting the Frequency Touch [ ] or [ ] of "Freq." to adjust the frequency of the selected band. Adjustable frequency Bands: 20 Hz to 20 kHz (in 1/3 octave steps) Band1: 20 Hz~100 Hz (63 Hz) Band2: 63 Hz~315 Hz (125 Hz) Band3: 125 Hz~500Hz (250 Hz) Band4: 250 Hz~1 kHz (500Hz) Band5: 500 Hz~2 kHz (1 kHz) Band6: 1 kHz~4 kHz (2 kHz) Band7: 2 kHz~7.2 kHz (4 kHz) Band8: 5.8 kHz~12 kHz (8 kHz) Band9: 9 kHz~20 kHz (16 kHz) Adjusting the Level Touch [ ] or [ ] of "Level" to adjust the level of selected band. Setting contents: -7 to +7 (Initial setting: 0) Adjusting the Time Correction (Time Correction) [Time Correction] is selected on the Sound setup menu in step 3. Refer to "Sound Setup Operation" (page 47). Before performing the following procedures, refer to "About Time Correction" (page 51). Setting item: Time Correction 1 Touch [ms] or [cm] to select mode for making adjustments. Each time you touch, the onscreen button and correction mode changes. Correction mode ms: Adjust time. cm: Adjust listening position and distance from each speaker. 2 Touch [ ] or [ ] for each speaker to adjust the time or distance. 0.0msec to 9.9msec (0.1msec/step) 0.0cm to 336.6cm (3.4cm/step) All speaker setting values are adjustable in the range of 20ms or 680cm. 49-EN