Alpine PSS-23WRA2 Owners Manual
Alpine PSS-23WRA2 Manual
 |
View all Alpine PSS-23WRA2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Alpine PSS-23WRA2 manual content summary:
- Alpine PSS-23WRA2 | Owners Manual - Page 1
so that you can use the product correctly. Alpine Electronics bears no responsibility for problems that arise as a result of failure to follow the instructions in the manuals. zThis manual includes a number of symbols that are intended to help you use the product safely, to prevent harm to you - Alpine PSS-23WRA2 | Owners Manual - Page 2
shock or fire. Do not block vents or heat sinks. Doing so could lead to fire or damage equipment. Use the accessories according to the instructions, and attach them securely. Failing to do so could lead to an accident Forbidden or damage equipment. Do not install the product where it may - Alpine PSS-23WRA2 | Owners Manual - Page 3
Tools Required Panel Removal Tool Wire Cutters T50 Torx Sockets 7mm 10mm Extension UNLIMITED JL Jeep Wrangler z 3/11 Phillips Screwdriver Ratchet Cordless Power Drill Cordless Impact Gun Accessory List Amplifier Assembly T-Harness Main Harness (10) Cable Ties RCA Adapters Front Top Dash - Alpine PSS-23WRA2 | Owners Manual - Page 4
UNLIMITED JL Jeep Wrangler z 4/11 Factory Equipment Removal Process 1 Use a panel removal tool to release (2) clips on the top of the plastic knee cover and remove it. 2 Use a panel removal tool to release (10) clips on the HVAC control panel, disconnect and remove it. 3 Extract (2) 7mm/Phillips - Alpine PSS-23WRA2 | Owners Manual - Page 5
UNLIMITED JL Jeep Wrangler z 5/11 Factory Equipment Removal Process (continued) 7 Extract (4) T50 Torx Screws from the passenger side 8 Tilt the passenger seat towards the back to reveal seat. (2) connectors, disconnect and remove the seat. Front of Vehicle 9 Using a panel removal tool, - Alpine PSS-23WRA2 | Owners Manual - Page 6
UNLIMITED JL Jeep Wrangler z 6/11 Installation 1 Connect the power cable to the Positive (+) battery terminal and route the cable down towards frame of the vehicle. Note: The Negative (-) terminal should remain disconnected until the installation is completed. 2 Route the power cable following - Alpine PSS-23WRA2 | Owners Manual - Page 7
UNLIMITED JL Jeep Wrangler z 7/11 Installation (continued) 7 Connect the main harness to the amplifier assembly and align it to the seat mounting holes. 8 Route the main harness along the side of the center console to the radio location. Front of Vehicle 9 Connect the T-harness and main harness - Alpine PSS-23WRA2 | Owners Manual - Page 8
OEM Head Unit Wiring Diagram To Vehicle Connectors Power/Speaker 52-in Black Connector OEM T-HARNESS ADAPTER TO OEM HEAD UNIT Front Speaker 4-PIN WHITE CONNECTOR Front Rear Subwoofer WHITE/GRAY White Connector GREEN/PURPLE Black Connector BROWN/ORANGE Red Connector Rear Speakers 4-PIN BLACK - Alpine PSS-23WRA2 | Owners Manual - Page 9
Aftermarket Head Unit Wiring Diagram UNLIMITED JL Jeep Wrangler z 9/11 To Vehicle Connectors Power/Speaker 52-Pin Black Connector OEM T-HARNESS ADAPTER To 3rd party wire harness and radio replacement interface * Wire Harness and Interface sold separately Front Speaker 4-PIN WHITE CONNECTOR - Alpine PSS-23WRA2 | Owners Manual - Page 10
Ground BROWN/ORANGE LR Red Connector RCA Adapter For a detailed Alpine Restyle head unit wiring diagram refer to it's corresponding installation manual. RED To Battery Cable HEAD UNIT POWER PACK KTP-445U To Vehicle's Battery POSITIVE (+) Terminal POWER PACK AMPLIFIER KTP-445U Amplifier - Alpine PSS-23WRA2 | Owners Manual - Page 11
UNLIMITED JL Jeep Wrangler z 11/11 Troubleshooting Guide Symptom 1 System will not turn on 2 Volume is , loose pins, disconnected terminals etc.. Disconnect the battery and re-connect after 5 minutes. If problem is not solved, the vehicle will have to be taken to a Jeep dealer. Connect the Remote - Alpine PSS-23WRA2 | Owners Manual - Page 12
using your new Alpine Restyle System or if you're having problems with your Alpine product, we can help. Please choose one of the Friday 7 AM- 5 PM PST Online Support Center s upportalpi neusa.custhelp.com Owner's Manuals alpine-usa.com/support SHARE YOUR #ALPINERESTYLE Alpine Restyle is not - Alpine PSS-23WRA2 | Owners Manual - Page 13
WARRANTY ITSELF. To read and understand the Limited Warranty, please see the Limited Warranty which is printed in the owner's manual and also may be found at alpine-usa.com/support. We encourage you to register this product on Alpine's website at www.alpineusa.com/registration at the time it is - Alpine PSS-23WRA2 | Owners Manual - Page 14
ou revise, le tout sans frais pour vous. Si les reparations sont couvertes par Ia garantie et si le produit a ete envoye aun a centre de service Alpine ou Alpine, le paiement des frais de reexpedition du produit incombe Alpine. CD Vous devez donner une description detaillee des a problemas qui sont - Alpine PSS-23WRA2 | Owners Manual - Page 15
follow instructions contained in the Owner's manual. ® of the problem(s) for which service is required. SERVICE: Should the product require service, please call the following number for your nearest Authorized Alpine Service Center. CUSTOMER SERVICE 1·800-421·2284, ext. 860307 TECH SUPPORT
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
 |
 |
Jeep Wrangler
UNLIMITED JL
1/11
Jeep Wrangler
PSS-23WRA Sound System
Installation Manual
Model: 4-Door Wrangler Unlimited JL
Model Year: 2018 –UP
*Not compatible with factory amplified systems
Introduction
Congratulations on purchasing the PSS-23WRA. This installation manual is designed to take you through
the step-by-step installation of the PSS-23WRA into a 2018 -Up Jeep Wrangler Unlimited. Please familiarize
yourself with the owner’s manual and if you still have additional questions please call 1-800-TECH-101.
Note
Design and specifications are subject to change without notice for improvement.
To Ensure Safe Use, Always Follow These Precautions
The installation of this product requires specialized skills and experience. We recommend that you have the
product installed by an Alpine authorized dealer.
Before you use this product, be sure to carefully read this installation manual and the separate user’s manual
so that you can use the product correctly. Alpine Electronics bears no responsibility for problems that arise as
a result of failure to follow the instructions in the manuals.
This manual includes a number of symbols that are intended to help you use the product safely, to prevent
harm to you and others, and to protect against damage to property. These symbols and their meanings are
listed below. Make sure you fully understand these symbols before you begin reading the main text.
Explanations of Injury and Damage That May Result from Incorrect Use
Warning
Ignoring the content marked by this indication and using the product incorrectly may
lead to death or serious injury.
Caution
Ignoring the content marked by this indication and using the product incorrectly may
lead to injury or property damage.
Jeep
Model
Year
Wrangler Unlimited
2018 – UP
* The specified vehicles have been tested and have met compatibility specs at the time of testing. Compatibility is
not guaranteed if the manufacturer has made production changes to the listed vehicles above.
Warning: Before you begin, remove the ground wire from the NEGATIVE (-)
terminal of the battery. Failing to do so can lead to electric shock, injury or damage
to equipment.