Alpine PSU-300CVC Owners Manual
Alpine PSU-300CVC Manual
 |
View all Alpine PSU-300CVC manuals
Add to My Manuals
Save this manual to your list of manuals |
Alpine PSU-300CVC manual content summary:
- Alpine PSU-300CVC | Owners Manual - Page 1
so that you can use the product correctly. Alpine Electronics bears no responsibility for problems that arise as a result of failure to follow the instructions in the manuals. ˜ This manual includes a number of symbols that are intended to help you use the product safely, to prevent harm to you - Alpine PSU-300CVC | Owners Manual - Page 2
shock or fire. Do not block vents or heat sinks. Doing so could lead to fire or damage equipment. Use the accessories according to the instructions, and attach them securely. Failing to do so could lead to an accident Forbidden or damage equipment. Do not install the product where it may - Alpine PSU-300CVC | Owners Manual - Page 3
Tools Required Panel Removal Tool Wire Cutters T50 Torx Sockets 8mm 10mm Extension Cordless Power Drill Honda Civic ˜ 3/11 Phillips Screwdriver Ratchet Cordless Impact Gun Accessory List Amplifier Assembly T-Harness Main Harness (10) Cable Ties RCA Adapters Power Cable Lock Washers ½" - Alpine PSU-300CVC | Owners Manual - Page 4
Honda Civic ˜ 4/11 Factory Equipment Removal Process 1 Using a panel removal tool release the clips and remove both right and left side covers on the center console. 2 Remove the HVAC control panel by pulling towards the back of the vehicle. 3 Extract (2) Phillips/8mm screws and release the cable - Alpine PSU-300CVC | Owners Manual - Page 5
Honda Civic ˜ 5/11 Factory Equipment Removal Process (continued) 7 Release the glove box compartment by pressing both Right and Left side tabs towards each other. 8 Using a T50 Torx socket extract (4) Torx screws from the passenger side seat. 9 Tilt the passenger seat towards the back to reveal - Alpine PSU-300CVC | Owners Manual - Page 6
Honda Civic ˜ 6/11 Installation (continued) 3 Mount the subwoofer level remote with the provided hook and loop adhesive tape in the center console compartment as shown below. Route the cable to the passenger side seat. 4 Connect the power cable to the main harness. 5 Lift the carpet near the - Alpine PSU-300CVC | Owners Manual - Page 7
Installation (continued) 8 Connect the T-harness and main harness to the radio. Refer to pages 8,9 or 10 for the corresponding system wiring diagram. Honda Civic ˜ 7/11 9 Use cable ties to secure any excess wiring and return all removed component to their location. 10 Connect the Negative (-) - Alpine PSU-300CVC | Owners Manual - Page 8
OEM Head Unit Wiring Diagram To Vehicle Connectors Power/Speaker 24-pin Gray Connector OEM T-HARNESS ADAPTER Front Speakers 4-PIN WHITE CONNECTOR Rear Speakers 4 PIN BLACK CONNECTOR WHITE/GRAY White Connector GREEN/PURPLE Black Connector BROWN/ORANGE Red Connector TO OEM HEAD UNIT Front Rear - Alpine PSU-300CVC | Owners Manual - Page 9
Honda Civic ˜ 9/11 Aftermarket Head Unit Wiring Diagram To Vehicle Connectors Power/Speaker 24-pin Gray Connector OEM T-HARNESS ADAPTER To 3rd party wire harness and radio replacement interface * Wire Harness and Interface sold separately Front Speaker 4-PIN WHITE CONNECTOR Rear Speakers 4-PIN - Alpine PSU-300CVC | Owners Manual - Page 10
BLACK To Chassis Ground BROWN/ORANGE L R Red RCA Adapter For a detailed Alpine Restyle head unit wiring diagram refer to it's corresponding installation manual. RED To Battery Cable HEAD UNIT POWER PACK KTP-445U To Vehicle's Battery POSITIVE (+) Terminal POWER PACK AMPLIFIER KTP-445U Ampli er - Alpine PSU-300CVC | Owners Manual - Page 11
Honda Civic ˜ 11/11 Troubleshooting Guide Symptom 1 System will not turn on 2 Volume the speaker, loose pins, disconnected terminals etc.. Disconnect the battery and re-connect after 5 minutes. If problem is not solved, the vehicle will have to be taken to a Honda dealer. Connect the Remote Turn-
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
 |
 |
Honda Civic
±
1/11
Honda Civic
PSU-300CVC Sound System Upgrade
Installation Manual
±
Model: Sedan LX, EX, EX-T, EX-L*
±
Model Year: 2016 – UP
*Not compatible with factory amplified systems
Introduction
±
Congratulations on purchasing the PSU-300CVC. This installation manual is designed to take you through the
step-by-step installation of the PSU-300CVC into a 2016 - UP Honda Civic. Please familiarize yourself with the
owner’s manual and if you still have additional questions please call 1-800-TECH-101.
Note
±
Design and specifications are subject to change without notice for improvement.
To Ensure Safe Use, Always Follow These Precautions
±
The installation of this product requires specialized skills and experience. We recommend that you have the
product installed by an Alpine authorized dealer.
±
Before you use this product, be sure to carefully read this installation manual and the separate user’s manual
so that you can use the product correctly. Alpine Electronics bears no responsibility for problems that arise as
a result of failure to follow the instructions in the manuals.
±
This manual includes a number of symbols that are intended to help you use the product safely, to prevent
harm to you and others, and to protect against damage to property. These symbols and their meanings are
listed below. Make sure you fully understand these symbols before you begin reading the main text.
Explanations of Injury and Damage That May Result from Incorrect Use
Warning
Ignoring the content marked by this indication and using the product incorrectly may
lead to death or serious injury.
Caution
Ignoring the content marked by this indication and using the product incorrectly may
lead to injury or property damage.
Honda
Model
Year
Civic
2016 – UP
* The specified vehicles have been tested and have met compatibility specs at the time of testing. Compatibility is
not guaranteed if the manufacturer has made production changes to the listed vehicles above.
Warning: Before you begin, remove the ground wire from the NEGATIVE (-)
terminal of the battery. Failing to do so can lead to electric shock, injury or damage
to equipment.