Alpine PXA-H800 Owners Manual
Alpine PXA-H800 Manual
 |
View all Alpine PXA-H800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Alpine PXA-H800 manual content summary:
- Alpine PXA-H800 | Owners Manual - Page 1
SYSTEM INTEGRATION AUDIO PROCESSOR PXA-H800 Digital Surround [I] DOLBY DIGITAL I PRO LOGIC II I EUPHONY AUTOMOBILE • :IEQ~ N:>c¥ MediaXpander PLUS • OWNER'S MANUAL Please read before using this equipment. • MODE D'EMPLOI Veuillez lire avant d'utiliser cet appareil. • MANUAL DE OPERACION Lealo - Alpine PXA-H800 | Owners Manual - Page 2
How to Read this Manual 5 Location of Controls 6 PXA-H800 6 Sound Manager for PXA-H800 6 RUX-C800 Commander (sold separately) .... 7 Features 8 About Operating 8 About the Audio Setting 8 Before You First Use the Unit 8 Installing Sound Manager for PXA-H800 ....... 9 From a PC Basic - Alpine PXA-H800 | Owners Manual - Page 3
Mode (2ch Playback Mode 30 Setting the 2-Channel Signal Playback Mode (2ch Playback Mode 30 Setting EUPHONY (EUPHONY 30 Using Dolby Pro Logic II (Dolby Pro Logic II 31 Multi Channel Function Adjustment Procedure 32 Multi Channel Setup 32 Adjusting the Speaker Volume Level (Output Level 33 - Alpine PXA-H800 | Owners Manual - Page 4
Information System Configuration 60 Terminology 61 In Case of Difficulty 62 Specifications 63 3-EN - Alpine PXA-H800 | Owners Manual - Page 5
-10°C (+14°F) before turning your unit on. Maintenance If you have problems, do not attempt to repair the unit yourself. Return it to your Alpine dealer or the nearest Alpine Service Station for servicing. Installation Location Make sure the PXA-H800 will not be installed in a location subjected to - Alpine PXA-H800 | Owners Manual - Page 6
Manual The Commander (RUX-C800) for PXA-H800 is sold separately. Audio setup and adjustments are performed using the RUX-C800 or a PC running the Sound Manager software for PXA-H800. Because the operation "Setting the Graphic EQ"/"Setting the Parametric EQ" operation. ~ "Setting the TCR Parameter" - Alpine PXA-H800 | Owners Manual - Page 7
location of Controls PXA-HSOO ·:!."- ' ~ Sound Manager for PXA-HSOO Consists of two screens: the main screen and the sub screen. The sub screen varies depending on the function . ALPINE PXA-H800 Sound ~ .... . ·-~-\ ~ ~ Dolby D Dolby PLII DTS (@) (@) (@) f - Alpine PXA-H800 | Owners Manual - Page 8
the setup value or mode. • For File( F) and Option(O) operation , refer to "Operating the Sound Manager for PXA-H800 Menu " (page 10). • Common PC operation [ CANC EL ]: Cancels the operation and takes you back to the previous screen. [Close Window]: Closes the current window. Operating the - Alpine PXA-H800 | Owners Manual - Page 9
is required. • Availability of operations Power ON/OFF Automatic adjustment Audio setup/ adjustment Commander (sold separately) 0 (RUX-C800) Lc,. (Only some functions 0 available* 1) PC(Sound Manager for X 0 0 PXA-H800) Ai-NET compatible head 0 unit Lc,. (Only some X functions - Alpine PXA-H800 | Owners Manual - Page 10
the Sound Manager software for PXA-HSOO before connecting the PXA-HSOO to your personal computer. • Before installing, all active programs must be stopped. 1 Insert the supplied CD-ROM (Sound Manager for PXA-HSOO) into the CD-ROM drive. Run the setup.exe file. Follow the installation instructions on - Alpine PXA-H800 | Owners Manual - Page 11
compatible head unit is connected, the power of the unit is linked with the power of the head unit. • When the powerfor PXA-H800 is turned off, Sound Manager for PXA-H800 will be closed. • Ifan Ai-NETcompatible head unit is not connected, the PXA -H800 is automatically turned on when Sound Manager - Alpine PXA-H800 | Owners Manual - Page 12
the instructions on the screen , restart the PXAHBOO unit and Sound Manager for PXA-HBOO. Viewing the Version Information (Option) You can view the version information for PXA-H800 and Sound Manager for PXA-H800. 1 Click [Option(O)]. 2 Click [Version Information (V)]. Downloading the Software - Alpine PXA-H800 | Owners Manual - Page 13
Source ~IJ rl rji•l I Ar-r JET· ·- Hr_, I I ... Switching the Sources The unit accepts up to five analog signal input lines and 2 digital signal input lines. For the connection, refer to the installation manual. When an Ai-NET compatible head unit is connected, the source should be switched at the - Alpine PXA-H800 | Owners Manual - Page 14
Setup screen will be automatically disp layed. • If no changes are made to current system settings, the operation input system in the preset and the current AUX input system do not match, the items concerning the AUX input damaged when driven by a full range signal. ~ Only when two subwoofers are connected - Alpine PXA-H800 | Owners Manual - Page 15
Input System Select)" (page 14). 4-2subsequent start-up: Click [Close Window). The confirmation screen will be displayed. Click [OK]. Sound Manager for PXA-HSOO will be closed. Turn the ignition key to off and then on again. The settings become effective. Setting the Speakers (Speaker Setup signal. - Alpine PXA-H800 | Owners Manual - Page 16
the AUX Input/ Digital Input (Analog AUX Input/Digital AUX Input) This step sets and adjusts the Analog AUX and Digital AUX. • When an Ai-NET compatible head unit is connected, external input of the PXA-HBOO becomes unavailable, and this setting will be disabled. 1 Click [Input Setup] for [Shortcut - Alpine PXA-H800 | Owners Manual - Page 17
navigation system, refer to the installation manual. Before Performing Automatic Measurement This unit is equipped with ImprintEQ, RoadEQ, input level control or a powered subwoofer, the measurement may not be possible ifthe input level is set low. However, to perform correct measurement, the input - Alpine PXA-H800 | Owners Manual - Page 18
ACC ON position, and start ALPINE PXA-H800 Sound. When it is an automobile 1 For a system other than an automobile factory system factory system Play back the SETUP DISC that comes with the unit on the head unit. Select the listening position. Following the instructions on the screen, conduct - Alpine PXA-H800 | Owners Manual - Page 19
the vehicle and close the door. A test signal will be output from the speakers to measure installed in the dashboard, and mid or high range harshness is apparent. LINEAR : A linear (flat) acoustic effect is actualized. This setting recreates the balanced sound of a studio listening room. USERS - Alpine PXA-H800 | Owners Manual - Page 20
Window]. • To enable this function, Defeat should be is set to ON. • Graphic EQ, Parametric EQ . • Sound may arrive setting contents on the unit. For details, refer . Refer to "Operating the Function Switching Tab click either [Memory 1] or [Memory 2]. ALPINE PXA-HSOO - Alpine PXA-H800 | Owners Manual - Page 21
Refer to "Operating the Function Switching Tab" (page 7). 5 Click [Setup] for "Auto TCR." ALPINE PXA-HSOO Sound Manager FlltoF : -X windows, sunroof, etc. • Turn the air-conditioner and heater OFF. • Turn off the engine of the vehicle. 2 Preparing the microphone. Refer to the installation manual - Alpine PXA-H800 | Owners Manual - Page 22
select {OFF]. 3 Click [T] and select and click either [Level1 ], [Level 2], or [Level 3]. ALPINE PXA-H800 S()llllll Manager During the 10 second countdown, go outside the vehicle and c lose the door. A test signal will be output from the speakers to measure the acoustic characteristics of the cabin - Alpine PXA-H800 | Owners Manual - Page 23
source of the head unit. MX Plus should be set for each external input. MX Plus mode will be switched, linked with the source switching of PXA-H800. 1 Click [MX Plus] for [Shortcut] tab in the main menu. MX Plus setup screen will be displayed. • When you click [Media Sound Manager] on the Function - Alpine PXA-H800 | Owners Manual - Page 24
] tab in the main menu. The EO Setup screen is displayed. • When you click [Mobile Sound Manager} on the Function switching tab, and then [EQ Setup}, the EQ Setup screen will also be displayed. Refer to "Operating the Function Switching Tab" (page 7). 2 Click [G.EQ] in the main menu. The EO mode - Alpine PXA-H800 | Owners Manual - Page 25
unit. For details, refer to "Storing the Preset Values (Preset Store)" (page 12). Displaying the data 1 Click [Show All Data]. The setup operating the settings indication area (Frequency, Level). The current setup When setting is complete, click [Close Window]. • To enable this function, Defeat - Alpine PXA-H800 | Owners Manual - Page 26
Setup screen is displayed. • When you click [Mobile Sound Manager] on the Function switching tab, and then {EQ Setup], the EQ Setup screen will also be displayed. Refer to "Operating the Function Switching Tab" (page 7). 2 Click [P.EQ is complete, click [Close Window]. • To enable this function - Alpine PXA-H800 | Owners Manual - Page 27
] for [Shortcut] tab in the main menu. The X-Over Setup screen is d isplayed. • When you click [Mobile Sound Manager] on the Function switching tab, and then [X- Over], the X-Over Setup screen will also be displayed. Refer to "Operating the Function Switching Tab" (page 7). 2 Click either £1!11 or - Alpine PXA-H800 | Owners Manual - Page 28
Drag the setup point up Slope Setup point operating the settings indication area. The current setup value setup value. You can also use the 1' ], [Tab}, [ f- ], [ ---7 }, [ and [ J, } keys on your PC to select the setup complete, click [Close Window]. • To restore the Speaker Setup)/ Setting - Alpine PXA-H800 | Owners Manual - Page 29
listening position using this function. The unit for the time correction can be meters) between your head and the various Setup screen is displayed. • When you click [Mobile Sound Manager] on the Function switching tab, and then [TCR], the TCR Setup screen will also be displayed. Refer to "Operating - Alpine PXA-H800 | Owners Manual - Page 30
[Value Input]. em: The unit for the time correction becomes "em." inch: The unit for channel. Click { ] again to output audio. • You can listen with Defeat OFF (adjusted setup values) or with Defeat ON (Initial . After this setting, preview the sound and adjust as necessary. A correction - Alpine PXA-H800 | Owners Manual - Page 31
click the mode from the pull-down menu. AlPINE PXA-H800 Sotuul Manager Setting contents: Stereo/Rear Fiii/EUPHONY/Dolby Pro Logic II Stereo: Plays back in 2ch stereo. Rear Fill: Outputs the front signal from the rear. EUPHON Y: Plays back in 5. 1 channel surround (page 30). Dolby Pro Logic - Alpine PXA-H800 | Owners Manual - Page 32
[OK]. 8 When setting is complete, click [Close Window]. • This setting is only available for 2-channel signal playback. • If you click [Call] in Step pull-down menu. ALPINE PXA-HSOO Sound M - Alpine PXA-H800 | Owners Manual - Page 33
the Speakers (Speaker Setup)!Setting the Subwoofers" (page 14), this item cannot be set. Multi Channel Function Adjustment Procedure Make the adjustments described below in order to reproduce Dolby Digital and DTS sound with greater accuracy. Setting the 2-Channel Signal Playback Mode (2ch Playback - Alpine PXA-H800 | Owners Manual - Page 34
only for Dolby Pro Logic ll, EUPHONY and DTS (with Center signal). Mixing the Low Range Audio for the Rear (Rear Mix) This function mixes the front channel audio signals with the audio signals output from the rear speakers, improving the sound in the vehicle's rear seat. This is used in a system - Alpine PXA-H800 | Owners Manual - Page 35
the center speaker has a small diameter and cannot produce low frequency sounds. (Initial setting: "OFF", "315Hz") 1 Click [ON] of "Center Bass Split." Center Bass Split Frequency 01·1 , .t;:rEf~ : I~ Hz ~ Turning this feature on mixes the audio signals output from the rear speakers with the front - Alpine PXA-H800 | Owners Manual - Page 36
to the Owner's Manual ofthe head unit. Turning Power On and Off When you turn on the power for the first time, to protect the speakers, no sound is output until you select the system in "Setting the Speaker System (System Select)" (page 37)/ "Setting the AUX Input System (AUX Input Setup)" (page 39 - Alpine PXA-H800 | Owners Manual - Page 37
NET compatible head unit is connected, the audio settings are adjusted at the head unit and you cannot set them on the unit itself. Switching the Sources The unit accepts up to five analog signal input lines and 2 digital signal input lines. For the connection, refer to the installation manual. When - Alpine PXA-H800 | Owners Manual - Page 38
operable when Defeat is set to OFF. • The stored contents are not deleted even when resetting the unit input system in the preset and the current AUX input system do not match, the items concerning the AUX input The Speaker Setup screen is displayed. • When "OK" is selected, the audio output is - Alpine PXA-H800 | Owners Manual - Page 39
unit returns to the previous item. • If the speaker system is changed, all setup values except those for AUX input will be restored to the initial setup range source. Many tweeters can be damaged when driven by a full range signal. • When you connect just one subwoofer; turn off "Subwoofer2." 6 To - Alpine PXA-H800 | Owners Manual - Page 40
Input (AUX IN) A TV or VCR with RCA audio output can be connected to the unit. Select OFF for the external input not connected (Initial setting: "ON"). 1 Press [FUNC.]. 2 Rotate the [Rotary encoder] to select "Input Setup -NET compatible head unit is connected, external input of the PXA -H800 becomes - Alpine PXA-H800 | Owners Manual - Page 41
compatible head unit is connected, external input of the PXA-H800 signal level of the external RCA input. Adjust this when the volume is higher or lower compared to that of the optical digital product. (Initial setting: "0 dB") 1 Press [FUNC.]. 2 Rotate the [Rotary encoder] to select "Input Setup - Alpine PXA-H800 | Owners Manual - Page 42
-NET(HU)/Ai- NET(CHG)/Digital 1/Digital 2 • The number ofAUX varies depending on the AUX Input Setup (page 39). 5 Select from compatible head unit is connected, the audio settings are adjusted at the head unit, and you cannot set them on the unit itself • If [ ~ ] is pressed during setting, the unit - Alpine PXA-H800 | Owners Manual - Page 43
unit is equipped with ImprintEQ, RoadEQ, and AutoTCR as automatic measurement functions. • The Commander cannot set lmprintEQ setup. Refer to PC Operation car phone is installed in the vehicle, move them outside of the cabin, or turn the power off Sound other than the measuring sound (ambient noise - Alpine PXA-H800 | Owners Manual - Page 44
setting contents on the unit. For details, refer to "Storing the Preset Values (Preset Store)" (page 36). Adjusting for Road Noise (Road EO) Road.EQ (REAL-TIME OPTIMIZED ADAPTIVE DRIVING EQ) is a function to automatically adjust the EQ properties in accordance with the road noise while driving. The - Alpine PXA-H800 | Owners Manual - Page 45
Level 1 Audio Setup/ Adjustment Level1 sounds for music sources such as radio/CD/MP3, by generating harmonics lost during digital processing. This high frequency compensation adds clarity and detail normally lost to road noise. This feature becomes enabled when an Ai-NET compatible head unit - Alpine PXA-H800 | Owners Manual - Page 46
the head unit. MX Plus should be set for each external input. MX Plus mode will be switched, linked with the source switching of PXA-H800. 1 Press [FUNC.]. 2 Rotate the [Rotary encoder] to select "MX Plus," and then press the [Rotary encoder]. 3 Rotate the [Rotary encoder] to select "MX Plus Setup - Alpine PXA-H800 | Owners Manual - Page 47
are reproduced with more powerful sound. Drama/Talk: The dialogue portion of a video is reproduced more clearly. • When "Non Effect" is selected, MX Plus becomes disabled. • Sources to be set vary depending on the system set in "Setting the AUX Input System (AUX Input Setup)" (page 39). 10 To adjust - Alpine PXA-H800 | Owners Manual - Page 48
setup , the unit returns to tuned independently, to make the necessary corrections. The parametric equalizer function is an advanced tool for serious audiophiles. • Set "Setting the Equalizer Mode (EQ Mode)" on page 46 to "P.EQ." 1 Press [FUNC.]. 2 Rotate the [Rotary encoder] to select "Sound - Alpine PXA-H800 | Owners Manual - Page 49
• You can listen with Defeat OFF (adjusted setup values) or with Defeat ON (Initial value) unit is equipped with an active crossover. The crossover limits the frequencies delivered to the outputs. Each channel is controlled please consult your authorized Alpine dealer. Front High respective Owner's - Alpine PXA-H800 | Owners Manual - Page 50
is installed on the rear deck, setting a gentle LPF slope (for example 6 dB/ oct.) makes the sound localization more to the rear. This can also affect the acoustic localization of the front. Note on adjusting the high range Depending on the speaker, inputting low frequency component signals (about - Alpine PXA-H800 | Owners Manual - Page 51
If [ ~ ] is pressed during setting, the unit returns to the previous item. When Tweeter is selectedfor FRONT )1 "Setting the Speakers (Speaker Setup)" (page 38). • Check distance (in meters) between your head and the various speakers. 2 the time required for the sound from the different speakers to - Alpine PXA-H800 | Owners Manual - Page 52
(TCR Parameter) The unit of measurement for time correction can be set as either "em" or "inch." (Initial setting: "em") 1 Press [FUNC.]. 2 Rotate the [Rotary encoder] to select "Sound Field Adj.," and then press the [Rotary encoder]. 3 Rotate the [Rotary encoder] to select "Setup," and then press - Alpine PXA-H800 | Owners Manual - Page 53
2 seconds. • If [ ~ ] is pressed during setting, the unit returns to the previous item. • For linear PCM, the front signals are sent to the rear channel even if the system is set up for "Stereo." • "Rear Fill" function Depending on the input signals, the sound may only be output from the front - Alpine PXA-H800 | Owners Manual - Page 54
Setup)" (page 38), this item cannot be set. • This function only works with 2-channel signals. • After the setting, it is recommended to store the setting contents on the unit then press the [Rotary encoder]. 5 Press[~]. This will take you back to the Step 3 screen. 6 Rotate the [Rotary encoder] to - Alpine PXA-H800 | Owners Manual - Page 55
order to reproduce Dolby Digital and DTS sound with greater accuracy. Setting the 2-Channel Signal Playback Mode (Mode) (page 52) This sets the 2-channel signal the disc, cueing,Jast-forwarding or switching the audio channel ofthis unit while making this adjustment. The setting is cancelled - Alpine PXA-H800 | Owners Manual - Page 56
[ ~ ] for at least 2 seconds. • If [ ~ 1 is pressed during setting, the unit returns to the previous item. • Do not perform operations such as Stop/Pause/Disc Exchange/Cue/ Fast Forward/Audio Switching on the player during this setup adjustment. When the decode state switches, the settings will be - Alpine PXA-H800 | Owners Manual - Page 57
the Speakers (Speaker Setup)" (page 38), this item cannot be set. • After the setting, it is recommended to store the setting contents on the unit. For details, refer to "Storing the Preset Values (Preset Store)" (page 36). Turning this feature ON mixes the audio signals output from the front - Alpine PXA-H800 | Owners Manual - Page 58
cancel muting. • When an Ai-NET compatible head unit is connected, you cannot use this fu nction. Turning the Back Light Off (BLACK OUT function) When Blackout Mode is turned on, the backlight and illuminated buttons of the Commander display and the PXA-H800 indicators will be turned off to reduce - Alpine PXA-H800 | Owners Manual - Page 59
item. Adjusting the Brightness of the Display (Dimmer) Set the Dimmer control to "Auto" to decrease the illumination brightness of the unit with the head lights of the vehicle ON. This mode is useful if you feel the unit's backlighting is too bright at night. (Initial setting: "Auto") 1 Press [FUNC - Alpine PXA-H800 | Owners Manual - Page 60
voltage Temperature inside the unit t' ' -- ~ Currently playing input audio stream channel information display LcFE L ' ',? ~ s E D I Effective status of each function and playing stream format information display ALPINE LOGO ~LPINE ' ' * When an Ai-NET compatible head unit is connected, the - Alpine PXA-H800 | Owners Manual - Page 61
Information System Configuration Table 1 (Output System) F-3way+SW (2.2ch system) F-3way+R (4.0ch system) F-2way+R+C+SW (5.1ch system) * Cannot be set to OFF. Table 2 (Input System) 5.1ch Input 4ch&2ch Input 2chx31nput 60-EN - Alpine PXA-H800 | Owners Manual - Page 62
Dolby Digital Dolby Digital is a digital audio compression technology developed by Dolby Laboratories that allows large quantities of audio data to be efficiently recorded on discs. It is compatible with audio signals from mono (1 channel) all the way up to 5.1channel surround sound. The signals for - Alpine PXA-H800 | Owners Manual - Page 63
active programs, and then upgrade the software again (see page 11). - If you still have trouble, stop use of the unit and consult your Alpine dealer. !calibration Error I • Automatic measurement failed for whatever reason. - Press "Rotary Encoder" to go back to the previous screen and perform the - Alpine PXA-H800 | Owners Manual - Page 64
V (Analog) (RCA AUX INPUT) 7 V (Analog) (SP AUX INPUT) Subwoofer crossover 20 to 200Hz (116 oct. steps) Rated output 4V (with 10 k ohms load) Distortion factor 0.01 % Input impedance 10 k ohms or higher Output impedance 1 k ohm or less Weight PXA-H800 1.35 kg RUX-C800 0.11 kg 63-EN - Alpine PXA-H800 | Owners Manual - Page 65
Dimensions PXA-H800 Width Height Depth RUX-C800 Width Height Depth 169 mm (6-3/4") 50.8 mm (2") 215 mm (8-112") 161 mm (6-3/8") 40 mm (1-5/8") 28 mm (1-1/8") Parts name I Quantity Parts for mounting 1set Manual 1set Microphone 1set CD-ROM 2pieces Due to continuous product - Alpine PXA-H800 | Owners Manual - Page 66
- Alpine PXA-H800 | Owners Manual - Page 67
SYSTEM INTEGRATION AUDIO PROCESSOR PXA-HSOO • INSTALLATION MANUAL • GUIDE D'INSTALLATION • MANUAL DE INSTALACION ALPINE ELECTRONICS MARKETING, INC. 1-1 -8 Nishi Gotanda, S h i n a g a wa- ku, Tokyo 141-0031 ,Japan Phone 03-5496-8231 ALPINE ELECTRONICS OF AMERICA, INC. 19145 Gramercy Place, Torran - Alpine PXA-H800 | Owners Manual - Page 68
(RUX-C800) (Sold separately 5 Preparation 5 Installing with Adhesive sheet S Installing with Commander unit holder S Connections 8 System Example 12 Connecting an automobile factory system (standard audio, etc.) and External Amplifier 12 Connecting a Non Ai-NET AV Head Unit, External Input - Alpine PXA-H800 | Owners Manual - Page 69
HBOOhas the appropriate amperage. Failure to do so may result in damage to the unit and/or the vehicle. When in doubt, consult your Alpine dealer. • The PXA-H800 uses female RCA-type jacks for connectio n to other units (e.g. amplifier) having RCA connectors. You may need an adaptor to connect other - Alpine PXA-H800 | Owners Manual - Page 70
For details on how to install and use the CD-ROM, "Sound Manager for PXA-H800," refer to the Owners Manual- PC guide. *3 For details on how to install and use the CD-ROM, "SETUP DISC," refer to the Owners Man ual - PC guide. Installation example 1 • Set the installation location. • Check that the - Alpine PXA-H800 | Owners Manual - Page 71
Function" in the Owner's Manual- PC or Commander guide. For safe use, make sure ofthe following: • location is stable and firm. • driver's view and operations are not obstructed. • Mount the road noise measurement microphone on the sun visor, dashboard or roof interior. • Installation on the sun - Alpine PXA-H800 | Owners Manual - Page 72
(M3 x 6 mm) (x2) @ Adhesive sheet (1 set) (x4) Installing with Commander unit holder • Set the installation location. • Check that the provided cord is sufficiently long. Install the unit where it is not exposed to water. Do not install the unit or wiring where it interferes with driving or an air - Alpine PXA-H800 | Owners Manual - Page 73
6 mm)@ and apply Adhesive sheets (b) and (c) to the predetermined unit holder mounting positions. Commander unit holder 0 Screw (M3 x 6 mm) (x2) Commander unit holder 7 Install the Commander unit from step 6 above in the installation position. Console or Dashboard etc. • To bend the bracket@, it - Alpine PXA-H800 | Owners Manual - Page 74
8 Affix the Commander unit holder® tightly using the 4 Adhesive sheets (d)® and 4 self-tapping screws (M4 x 14mm)@. Console or Dashboard underside i t cAUTION Make sure the Commander unit is tightly affixed. If any screws are loose, the Commander unit can rattle or fall while driving. 7-EN - Alpine PXA-H800 | Owners Manual - Page 75
implement ing an automatic adjustment of EQ characteristics (RoadEQ) along w ith the quantity of road no ise while d riving. Audio input jacks (RCA inputs) *3 Used to input t he audio o utput signa ls of a head unit connected w ith RCA con nections to the PXA-H SOO. Connect to the microphone (incl - Alpine PXA-H800 | Owners Manual - Page 76
, refer to "Setting the AUX Input System (AUX Input System Select)" in the Owners Manual - PC guide, or "Setting the AUX Input System (AUX Input Setup)" in the Owners Manual- Commander guide. • Ifconnecting to an Ai-NET Head Unit/AV Head Unit, RCA input (AUX INPUT) connection is not available. • For - Alpine PXA-H800 | Owners Manual - Page 77
jacks(RCA output) Outputs an audio signal Connect to: Connect to amplifier RESET switch 0 The system of t his unit is reset. Commander connection terminal Use when operating this unit from the RUX-C800 (sold separately). Connect to the RUX-C800 (sold separately). Computer connection terminal - Alpine PXA-H800 | Owners Manual - Page 78
• Speaker System Example F-2way+R+SW(4.2ch System) F-3way+SW(2.2ch System) Front High(L) Front High(R) Front Low(L) -----+-t---i-+--.- Front Low(R) Rear(R) Subwoofer(L) Subwoofer(R) F-3way+R(4.0ch System) Front High(L) Front Mid(L) Front Low(L) Front High(R) Front Mid(R) Front Low(R) Rear(R) - Alpine PXA-H800 | Owners Manual - Page 79
factory system (standard audio, etc.) and External Amplifier • Input Pattern: 4ch&2ch Input CH-1 (L) FL (Front Left) I CH-2 (R) AUXINPUT I CH-3 (L) I CH-4(R) AUXl FR I (Front Right) I RL (Rear Left) RR I (Rear Right) Commander cable (RUX-CSOO included) u-a ·li ·-· --r] RUX-CSOO (Sold - Alpine PXA-H800 | Owners Manual - Page 80
Digital Compatible DVD Player, etc. *' : 6 rfi=:r 1:=:~, o:~t~~~~~ Jl @ i'\--e'"-',J..rk,. le~@1 ~@~ 1~B.fu~l@ - --- - - -~ : ' ' TV Tuner or Video Player, etc. TV Tuner or Video Player, etc. White Red Red White Guide Control Lead White/Green Navigation audio input connector - Alpine PXA-H800 | Owners Manual - Page 81
To External Amplifier (see page 10} Commandercable Q-~~ ~~~-~:~:f-l~- ==~---~-r:::IJ:,~I Guide Control Lead (RUX-CSOO included) RUX-CSOO {Sold separately) Red White White/Green } Not Connected Navigation audio input connector Remote Control Output Lead Blue/White Ground Lead Black Battery - Alpine PXA-H800 | Owners Manual - Page 82
Compatible DVD Player, etc. To Digital Output Terminal TV Tuner or Video Player, etc. TV Tuner or Video Player, etc. White Computer Audio output jacks connection terminal Guide Control Lead To External Amplifier (see page 101 Commander cable D-~1a 1-~a=~S=§-~§--~drJ·~J:·~ (RUX-C800 - Alpine PXA-H800 | Owners Manual - Page 83
that uses an Ai-NET compatible AV Head Unit. (Connection of the remote input cord (white/ brown) is required.) Use the Remote Control Eye in a system that uses any other manufacturers monitor. For details, refer to the connected DVD changers instruction manual. *7 If connecting DVA-5210, connect - Alpine PXA-H800 | Owners Manual - Page 84
laying or bundling optic fiber cables, the minimum bending radius should be 30 mm. Bending beyond the radius will break the cable, resulting in no digital sound being output. Do not put the product or other items on the optic fiber cable. }7-EN - Alpine PXA-H800 | Owners Manual - Page 85
Sold separately) *2 Ai-NET compatible To Digital Output Changer *4• *5 Terminal (Optical Not Used ~ I Computer connection terminal Guide Control Lead White/Green Audio output jacks To External Amplifier (see page 10) ----rJ Commander cable (RUX-C800 included) RUX-CSOO (Sold separately - Alpine PXA-H800 | Owners Manual - Page 86
from sharp edges or protrusion. 2 Connect the battery(-) terminal. 3 Turn on the engine key. Make sure the unit operating correctly by referring to the Owner's Manual. Check the Owner's Ma nualsfor the connected products as well. 4 Make sure all factory components such the brake lamps, etc. work - Alpine PXA-H800 | Owners Manual - Page 87
- Alpine PXA-H800 | Owners Manual - Page 88
PXA-H800 Sound Manager for PXA-HSOO Disc version Ver.1.100 • SUPPLEMENTARY MANUAL Please read before using this equipment. • MANUEL SUPPLEMENTAIRE Veuillez lire avant d'utiliser cet appareil. • MANUAL SUPLEMENTARIO Lealo antes de utilizar este equipo. ALPINE ELECTRONICS MARKETING, INC. 1-1·8 Nishi - Alpine PXA-H800 | Owners Manual - Page 89
connected Alpine Ai-NET compatible head unit. Installing Sound Manager for PXA-HSOO (PC Software) The pre-installed software version of PXA-H800 and RUX-C800 Commander (sold separately) is Ver.l.IOO. To use Ver.1.100 Install Ver. 1.100 using the suppli ed CD-ROM , when use PXAH800 and RUX-C800 with - Alpine PXA-H800 | Owners Manual - Page 90
) to the PXA-H800 before starting installation. 9 Start Sound Manager for PXA-H800. The initial start-up message screen appears. 10 Click [Option(O)], and then click [RUX-C800 Software Download(F)]. • Do not click [OK] or [Cancel]. If you click [OK], the speaker system setup screen will appear - Alpine PXA-H800 | Owners Manual - Page 91
Data(R)] Software download Software for both the PXA-H800 and Commander can be downloaded. PXA-H800: [Option(O)]- [PXA-H800 Software Download(M)] Commander: [Option(O)]- [RUX-C800 Software Download(F)] "Open File" box will be shown. 3 Select the file backed up in Step 5 in "Update Software", and - Alpine PXA-H800 | Owners Manual - Page 92
) in the Owner's Manual - Commander guide. !Mixing Navi Audio Guidance (Navi Mix Setup) Page 41 3 Click [OK] when a confirmation message appears. Exit Sound Manager for PXA-H800. Turn the ignition key to off, and then on again. The settings become effective. If the software is updated to Ver.2.100 - Alpine PXA-H800 | Owners Manual - Page 93
TOSLINK Digital Connection Compatibility v v X v v v Note Countermeasure is available PXA-H800 control via Ai-NET When connecting a PXA-H800 by Ai-NET, several functions are not controlled from Alpine head unit. These functions can be controlled using the remote commander RUX-C800 and PXA-H800 - Alpine PXA-H800 | Owners Manual - Page 94
- Alpine PXA-H800 | Owners Manual - Page 95
the best audio/video/navigation products in the world and hope your expectations are met. Please take a moment to protect your purchase by registering your product now at the following address: www.alpine-usa.com/registration. You will be informed of product and software updates (if applicable - Alpine PXA-H800 | Owners Manual - Page 96
may exceed the PXA-H800's delay capability. If any channel indicates that maximum 20ms delay was applied during automatic setup, it will be necessary to manually adjust each channel's relative time delay to within the maximum delay range for satisfactory imaging. If you encounter a problem, call the - Alpine PXA-H800 | Owners Manual - Page 97
- Alpine PXA-H800 | Owners Manual - Page 98
isc version er.l.IOO
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
 |
 |
SYSTEM
INTEGRATION
AUDIO
PROCESSOR
PXA-H800
[I]
DOLBY
DIGITAL
I
•
:IEQ~
Digital
Surround
PRO
LOGIC
II
I
EUPHONY
AUTOMOBILE
N:>c¥
MediaXpander
PLUS
•
OWNER'S
MANUAL
Please read before using this equipment.
•
MODE
D'EMPLOI
Veuillez lire avant d'utilis
er
cet
appareil.
•
MANUAL
DE
OPERACION
ALPINE
ELECTRONICS
MARKETING,
INC.
1-1-8 Nishi Gotanda,
Shinagawa-ku,
Tokyo
141
-0031, Japan
Phone 03-5496-8231
ALPINE
ELECTRONICS
OF
AMERICA, INC-
19145 Gramercy Place, Torrance,
Calilornia 90501, U.S.A.
Phone 1-800-ALPINE-1 (1-800-257-4631)
ALPINE
ELECTRONICS
OF
CANADA, INC.
777 Supertest Road, Toronto,
Ontario M3J 2M9, Cana
da
Phone 1-800-ALPINE-1 (1-800-257-4631)
Qingdao Dongli Xinhaiyuan Printing
Co
., Ltd.
No.1
7,
jiushuidong road, Qingd
ao,
China
Lealo antes de utilizar
este
equipo.
ALPINE
ELECTRONICS
OF
AUSTRALIA
PTY.
LTD.
161-1
65
Princes Highw
ay,
Hallam
Victoria 3803, Australia
Phone 03-8787-1200
ALPINE
ELECTRONICS
GmbH
Wilhelm-Wagenfeld-Str. 1-3,
80807 Munchen, Germany
Phone
08
9-32
42
640
ALPINE
ELECTRONICS
OF
U.K
.
LTD.
Alpine House
Fletchamstead Highway, Coventry CV4 9TW, U.K.
Phone 0870-33 33 7
63
ALPINE
ELECTRONICS
FRANCE
S.A.R.l.
(RCS PONTOISE B 338
101
280)
98, Rue de Ia Belle Etoile, Z.l. Paris Nord
II
,
B.
P.
50016,95945
Roissy Charles
de
Gaulle
Cedex, Fran
ce
Phone
01
-48638989
ALPINE
ITALIA
S.
p.A
.
Viale C. Colombo
8,
20090 Trezzano
Sui Naviglio (MI), Italy
Phone 02-484781
ALPINE
ELECTRONICS
DE
ESPANA,
S.A.
Portal
de
Gamarra 36, Pabell6n, 32
01013 Viloria (Aiava)-APDO 133, Spain
Phone 945-283588
ALPINE
ELECTRONICS
(BENELUX)
GmbH
Leuvensesteenweg
51
O-B6,
1
93
0 Zav
en
tem, Belgium
Phone 02-725-
13
15
Designed by ALPINE
Ja
pan
Printed in China (Y)
68
-13530Z65-A
M3514447010