Home » Amana Manuals » Ranges » Amana AER5630BA » Manual Viewer

Amana AER5630BA Installation Instruction

Amana AER5630BA Manual

View all Amana AER5630BA manuals

Add to My Manuals
Save this manual to your list of manuals

Amana AER5630BA manual content summary:

Amana AER5630BA | Installation Instruction - Page 1
FREESTANDING ELECTRIC RANGES Table of Contents RANGE SAFETY 2 INSTALLATION REQUIREMENTS 3 Tools and Parts 3 Location Requirements 3 Electrical Requirements - U.S.A. Only 5 INSTALLATION INSTRUCTIONS 6 Unpack Range 6 Install Anti-Tip Bracket 6 Electrical Connection - U.S.A. Only 8 Verify Anti
Amana AER5630BA | Installation Instruction - Page 2
important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the reduce the chance of injury, and tell you what can happen if the instructions are not followed. Range Foot WARNING Tip Over Hazard A child or
Amana AER5630BA | Installation Instruction - Page 3
wall. Thickness of flooring may require longer screws to anchor bracket to floor. Parts needed If using a power supply cord kit: ■ A UL listed power per the instructions in this document. ■ Four-wire power supply cord or cable must be used in a mobile home installation. The appliance wiring will
Amana AER5630BA | Installation Instruction - Page 4
the frame behind a top corner of the door or either side of the drawer) IMPORTANT: Range must be level after installation. Follow the instructions in the "Level Range" section. Using the cooktop as a reference for leveling the range is not recommended. *Range can be raised approximately 1" (2.5 cm
Amana AER5630BA | Installation Instruction - Page 5
electric shock. Check with a qualified electrician or service technician if you are in doubt as to whether the appliance is properly grounded. Do not modify the power type of electrical connection you will be using and follow the instructions provided for it here. ■ Range must be connected to the
Amana AER5630BA | Installation Instruction - Page 6
INSTALLATION INSTRUCTIONS Unpack Range WARNING Excessive Weight Hazard Use two or more people to move and install range. Failure to do so can result in back or other injury. 1. Remove shipping materials, tape and film from range. 2. Remove oven racks and parts package from inside oven. 3. Do not
Amana AER5630BA | Installation Instruction - Page 7
position Wall Mounting Front position Diagonal (2 options) 8. Move range forward onto shipping base, cardboard or hardboard to continue installing the range using the following installation instructions. 7
Amana AER5630BA | Installation Instruction - Page 8
and toward you to remove cover from range. Electrical Shock Hazard Disconnect power before servicing. Use 8 gauge copper or 6 gauge aluminum wire. Electrically ground range. Failure to follow these instructions can result in death, fire, or electrical shock. Style 1: Power supply cord strain relief
Amana AER5630BA | Installation Instruction - Page 9
homes ■ Recreational vehicles ■ In an area where local codes prohibit grounding through the neutral 1. Part of metal ground strap must be cut out and removed. 5. Complete installation following instructions for your type of electrical connection: 4-wire (recommended) 3-wire (if 4-wire is not
Amana AER5630BA | Installation Instruction - Page 10
4. Use a Phillips screwdriver to connect the green ground wire from the power supply cord to the range with the ground-link screw and ground-link section. The ground wire must be attached first. 5. Use ³⁄₈" nut driver to connect the neutral (white) wire to the center terminal block post with one of
Amana AER5630BA | Installation Instruction - Page 11
1. Part of metal ground strap must be cut out and removed. A B C A. Metal ground strap B. Discard C. Ground-link screw 2. Use a Phillips screwdriver to remove the ground-link
Amana AER5630BA | Installation Instruction - Page 12
the range forward and determine if there is an obstruction between the range and the mounting wall. If you need assistance or service, refer to the "Assistance or Service" section of the Use and Care Guide, or the cover or "Warranty" section of the User Instructions, for contact information. 12
Amana AER5630BA | Installation Instruction - Page 13
range without anti-tip bracket installed and engaged. Please reference the "Assistance or Service" section of the Use and Care Guide, or the cover or "Warranty" section of the User Instructions, to contact service. Level Range Determine if you have AquaLift® Technology or Steam Clean by referring
Amana AER5630BA | Installation Instruction - Page 14
installation procedures. Complete Installation 1. Check that all parts are now installed. If there is an extra part, go back through the steps to see which verify the electrical supply. ■ See the "Troubleshooting" section in the Use and Care Guide or User Instructions. When the range has been on for
Amana AER5630BA | Installation Instruction - Page 15
and be killed. Install anti-tip bracket to floor or wall per installation instructions. Slide range back so rear range foot is engaged in the slot of range is level. Electrical Shock Hazard Disconnect power before servicing. Replace all parts and panels before operating. Failure to do so can result
Amana AER5630BA | Installation Instruction - Page 16
W10403811C ®/™ ©2012 Whirlpool. All rights reserved. 8/12 Printed in U.S.A.