Amana NGD4700YQ Dimension Guide
Amana NGD4700YQ Manual
 |
View all Amana NGD4700YQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Amana NGD4700YQ manual content summary:
- Amana NGD4700YQ | Dimension Guide - Page 1
Dryers Gas (U.S.A. and Canada) PRODUCT MODEL NUMBERS NGD4500V, NGD4600Y, NGD4700Y, NGD5100T Installation clearances: The location must be large enough to allow the dryer door to open fully. Most installations require a minimum 5½" (140 mm) clearance behind the dryer installation and servicing. ■■ - Amana NGD4700YQ | Dimension Guide - Page 2
larger tubing should be used. Pipe-joint compounds resistant to the action of L.P. gas must be used. An individual manual shutoff valve must be installed within 6 ft (1.8 m) of the dryer in accordance with the National Fuel Gas Code ANSI Z223.1. ELECTRICAL REQUIREMENTS A 120-volt, 60 Hz, AC-only, 15
-
1 -
2
 |
 |
29" and 27" Dryers
Gas (U.S.A. and Canada)
PRODUCT MODEL NUMBERS
W10115228C
02/2012
NGD4500V, NGD4600Y,
NGD4700Y, NGD5100T
Installation clearances:
The location must be large enough to allow the dryer door to open fully.
Most installations require a minimum 5½" (140 mm) clearance behind the dryer for the exhaust vent with elbow.
A
B
C
18"*
(457 mm)
1"
(25 mm)
29"
(737 mm)
1"
(25 mm)
1"*
(25 mm)
14" max.*
(356
mm)
27
¾"
(705 mm)
48 in.
(310 cm )
2
*
2
3"*
(76 mm)
3"*
(76 mm)
24 in.
(155 cm )
2
*
2
43"
(1092 mm)
*29
1
/
2
"
(749 mm)
27"
(687 mm)
A
23¾"
(603 mm)
43"
(1092 mm)
27"
(687 mm)
*29
1
/
2
"
(749 mm)
13¾"
(349 mm)
B
A
B
C
18"*
(457 mm)
1"
(25 mm)
27"
(686 mm)
1"
(25 mm)
1"*
(25 mm)
14" max.*
(356
mm)
29
¼"
(743 mm)
5
½"*
(140 mm)
48 in.
(310 cm )
2
*
2
24 in.
(155 cm )
2
*
2
3"*
(76 mm)
3"*
(76 mm)
29" Wide Models
Dryer Dimensions
Installation Spacing
27" Wide Models
Dryer Dimensions
A. Large opening side-swing door
B. Large opening side-swing door
C. Wide opening side-swing door
D. Wide opening hamper door
A. Recessed area
B. Side view – closet or confined area
C. Closet door with vents
*Required spacing
Installation Spacing
Installation spacing for recessed area or closet
The dimensions shown are for the minimum spacing allowed.
■
Additional spacing should be considered for ease of
installation and servicing.
■
Additional clearances might be required for wall, door, and
floor moldings.
■
Additional spacing of 1" (25 mm) on all sides of the dryer
is recommended to reduce noise transfer.
■
For closet installation, with a door, minimum ventilation
openings in the top and bottom of the door are required.
Louvered doors with equivalent ventilation openings are
acceptable.
■
Companion appliance spacing should also be considered.
A. Large opening side-swing door
B. Large opening side-swing door
A. Recessed area
B. Side view – closet or confined area
C. Closet door with vents