Apple MB535LL User Guide

Apple MB535LL - Mac Pro - 6 GB RAM Manual

Get Apple MB535LL - Mac Pro - 6 GB RAM PDF manuals and user guides
UPC - 885909235803
View all Apple MB535LL manuals
Add to My Manuals
Save this manual to your list of manuals

Apple MB535LL manual content summary:

  • Apple MB535LL | User Guide - Page 1
    Mac Pro User's Guide Includes setup, expansion, and troubleshooting information for your Mac Pro computer
  • Apple MB535LL | User Guide - Page 2
    purposes only and constitutes neither an endorsement nor a recommendation. Apple assumes no responsibility with regard to the performance or use of these products. Manufactured under license from Dolby Laboratories. "Dolby,""Pro Logic," and the double-D symbol are trademarks of Dolby Laboratories
  • Apple MB535LL | User Guide - Page 3
    Expansion Options 24 Getting Answers 27 Chapter 3: Working Inside Your Computer 28 Opening the Computer 32 Installing Memory 38 Installing Internal Storage Devices 47 Adding PCI Express Cards 50 Replacing the Internal Backup Battery 53 Chapter 4: Troubleshooting 53 Problems with Your Mac Pro 3
  • Apple MB535LL | User Guide - Page 4
    58 Problems with Your Display 60 Problems with Your Internet Connection 63 Using Apple Hardware Test 64 Reinstalling the Software That Came with Your Computer 65 Maximizing Ethernet Performance 66 Learning More, Service, and Support 68 Locating Your Serial Number 69 Appendix A: Specifications 77
  • Apple MB535LL | User Guide - Page 5
    new high-performance Mac Pro computer. This chapter contains instructions for setting up your computer and display. Your Mac Pro features the latest computer technology, including advanced 64-bit multicore processor technology, high-speed FB-DIMM memory, PCI Express graphics and expansion cards, and
  • Apple MB535LL | User Guide - Page 6
    display Pick up your Mac Pro by both of its handles using correct lifting techniques. If your display is heavy, use correct lifting techniques when positioning it as well. Position the computer and display so that:  They are each on a sturdy, flat surface  The power cable connectors don't press
  • Apple MB535LL | User Guide - Page 7
    Step 2: Plug in the power cord Plug the power cord completely into the recessed power cord socket on the back of your Mac Pro and plug the other end into a grounded outlet or a grounded power strip. Power cord socket Power cord plug Chapter 1 Getting Started 7
  • Apple MB535LL | User Guide - Page 8
    the instructions that came with the display for additional setup information. Display ports USB port FireWire 400 port Display cable You can connect two displays with Digital Visual Interface (DVI) connectors to the display ports on the back of your Mac Pro. You can connect any Apple display to
  • Apple MB535LL | User Guide - Page 9
    cable You can also connect displays that have an Apple Display Connector (ADC) or a video graphics array (VGA) connector using one of the following adapters: Â To connect a VGA display, use the Apple DVI to VGA Display Adapter included with your Mac Pro to connect the display to the DVI port. Â To
  • Apple MB535LL | User Guide - Page 10
    cable To access the Internet or a network, connect one end of an Ethernet cable to either of the Ethernet ports on the back of your Mac Pro. Connect the other end to a DSL modem, cable modem, or Ethernet network. Gigabit Ethernet ports Step 5: Connect the keyboard and mouse Connect the keyboard
  • Apple MB535LL | User Guide - Page 11
    Plug the mouse into a USB port on the keyboard. Keyboard Mouse If the keyboard cable is not long enough to reach a USB port on your computer, use the keyboard extension cable that came with your computer. Apple keyboard extension cable Chapter 1 Getting Started 11
  • Apple MB535LL | User Guide - Page 12
    Using a Wireless Keyboard and Mouse If you purchased an Apple Wireless Keyboard and Mouse with your Mac Pro, follow the instructions that came with the keyboard and mouse to set them up. Step 6: Turn on your Mac Pro Press the power (®) button on the front of the computer to turn it on. If your
  • Apple MB535LL | User Guide - Page 13
    hold the computer's power button for 5 or 6 seconds, until the computer turns off. Press it again to turn on the computer. Â If you see a blinking question mark on the screen or a series of flashes from the status light, see Chapter 4, "Troubleshooting," on page 53. Putting Your Mac Pro to Sleep or
  • Apple MB535LL | User Guide - Page 14
    Click the mouse. Â Press the power button on the front of your Mac Pro. Shutting Down Your Mac Pro If you will not be using your Mac Pro for a day or more, you should turn it off. To turn off your Mac Pro, choose Apple () > Shut Down. WARNING: Do not turn off your Mac Pro by turning off the switch
  • Apple MB535LL | User Guide - Page 15
    at www.apple.com links you to the latest Apple news, free downloads, and online catalogs of software and hardware for your Mac Pro. You can also find the manuals for many Apple products, and technical support for all of Apple's products, on the Apple Support website at www.apple.com/support. 15
  • Apple MB535LL | User Guide - Page 16
    Basic Features on the Front of Your Mac Pro Optical drive Status light Second optical drive (optional) ® Power button f Headphone jack USB 2.0 ports (2) FireWire 800 port FireWire 400 port 16 Chapter 2 Getting to Know Your Mac Pro
  • Apple MB535LL | User Guide - Page 17
    ) discs. To open the drive, press the Media Eject (C) key on your Apple Keyboard. If your Mac Pro has a second optical drive, press the Option and Media Eject (C) keys to open it. ® Power button Press this button to turn on your Mac Pro, put it to sleep, or wake it from sleep. To restart, press
  • Apple MB535LL | User Guide - Page 18
    Ports and Connectors on the Back of Your Mac Pro Power socket ¥ Locking latch d USB 2.0 ports (3) H FireWire 400 port H FireWire 800 port G Gigabit Ethernet ports (2) 18 Chapter 2 Getting to Know Your Mac Pro
  • Apple MB535LL | User Guide - Page 19
    , 400, and 800 Mbit/s. G Dual Gigabit Ethernet ports with jumbo frame support Connect your Mac Pro to a high-speed Ethernet network to access the Internet or network resources such as printers and servers, and share information over the network using a CAT 5e cable. Chapter 2 Getting to Know Your
  • Apple MB535LL | User Guide - Page 20
    More Ports and Connectors on the Back PCI Express expansion slots £ DVI display port 1 £ DVI display port 2 Optical digital audio out port Optical digital audio in port , Audio line-in port - Audio line-out port 20 Chapter 2 Getting to Know Your Mac Pro
  • Apple MB535LL | User Guide - Page 21
    , to either port. For full resolution, connect the 30-inch Apple Cinema HD Display to port 1. You can also connect displays that use a video graphics array (VGA) connector with the Apple DVI to VGA Display Adapter that came with your Mac Pro. Optical digital audio in and out ports Connect to decks
  • Apple MB535LL | User Guide - Page 22
    Internal Expansion Options 22 Chapter 2 Getting to Know Your Mac Pro Optical drive carrier Hard disk drive carriers (4) Slots 2-4: PCI Express Battery Slot 1: Double-wide PCI Express graphics (graphics card installed) Top memory card Bottom memory card
  • Apple MB535LL | User Guide - Page 23
    Cards" on page 47. Memory cards Your Mac Pro has two memory cards. Each card holds up to 4 FB-DIMMS, for a total of 8 DIMMs. To add more memory, install 667MHz FB-DIMMs in pairs on the memory cards. See "Installing Memory" on page 32 for information about the specific type of memory used in Mac Pro
  • Apple MB535LL | User Guide - Page 24
    the following: To learn about... Installing additional drives, memory, expansion cards, or changing the battery Troubleshooting your computer if you have a problem Finding service and support for your Mac Pro Using Mac OS X Using iLife applications See... Chapter 3, "Working Inside Your Computer
  • Apple MB535LL | User Guide - Page 25
    top of a Mac Help page, and then choose AirPort Help from the list. The Bluetooth Support page at www.apple.com/support/ bluetooth. Or Mac Help and search for "printing." Open Mac Help and search for "USB" or "FireWire." Open Mac Help and search for "Internet." Chapter 2 Getting to Know Your Mac Pro
  • Apple MB535LL | User Guide - Page 26
  • Apple MB535LL | User Guide - Page 27
    Backup Battery" on page 50 WARNING: Apple recommends that you have an Apple-certified technician install memory, PCI Express cards, and internal storage devices. To contact an Apple Authorized Service Provider or Apple for service, see "Learning More, Service, and Support" on page 66. If you install
  • Apple MB535LL | User Guide - Page 28
    outside of your Mac Pro to discharge any static electricity from your body. Important: Always discharge static before you touch any parts or install any components inside the computer. To avoid generating static, do not walk around the room until you finish installing the cards, memory, or internal
  • Apple MB535LL | User Guide - Page 29
    the metal on top of the computer. 4 Unplug all the cables and the power cord from the computer. · WARNING: To avoid damaging internal components or the components you want to install, always unplug your Mac Pro. Don't attempt to install items while it's plugged in. Chapter 3 Working Inside Your
  • Apple MB535LL | User Guide - Page 30
    5 Hold the side panel and lift the latch on the back of the computer. Lift the latch while holding the side panel. 30 Chapter 3 Working Inside Your Computer
  • Apple MB535LL | User Guide - Page 31
    6 Remove the side panel. Pull the top of the side panel out and lift it up. Important: When you remove the side panel, hold it securely. Chapter 3 Working Inside Your Computer 31
  • Apple MB535LL | User Guide - Page 32
    Mac Pro to operate louder or decrease performance to conserve heat. DIMMs from older Mac computers cannot be used in your Mac Pro. Note: When purchasing DIMMs for use in Mac computers, make sure that the memory vendor conforms to the Joint Electron Device Engineering Council (JEDEC) specification
  • Apple MB535LL | User Guide - Page 33
    , open it, and remove the side panel, following the instructions on page 28. · WARNING: Let your computer cool down for 5 to 10 minutes before you touch the internal components. The components on the memory cards may be very hot. 2 Remove the memory card and place it on a soft, clean cloth. Chapter
  • Apple MB535LL | User Guide - Page 34
    . Repeat to install the second FB-DIMM. Don't touch the gold DIMM connectors. Important: Add DIMMs to the memory cards in the order shown here. Top memory card Bottom memory card First pair of additional DIMMs Second pair of additional DIMMs Third pair of additional DIMMs 34 Chapter 3 Working
  • Apple MB535LL | User Guide - Page 35
    side, push the memory cards straight down into the memory slots. 5 Lay your Mac Pro down on a soft, clean cloth on the desk or work surface to avoid scratching the work surface or your Mac Pro. 6 Install the memory cards, pushing slightly until they are seated in the memory slot. Chapter 3 Working
  • Apple MB535LL | User Guide - Page 36
    7 Stand your Mac Pro up and replace the side panel. Important: When you replace the side panel, hold it securely so it stays in place as you push the latch down. Place the side panel in the slot and then push to close. 36 Chapter 3 Working Inside Your Computer
  • Apple MB535LL | User Guide - Page 37
    8 Push the latch down to secure the side panel. While pushing the side panel against the computer, push the latch down until it is firmly secured against the back of the computer. To lock the side panel or secure the computer, flip down the lock tab before you close the latch. This provides a
  • Apple MB535LL | User Guide - Page 38
    Â Height: 1.0 inch For more information about requirements and devices supported, visit an Apple Authorized Reseller or the Apple Support website at www.apple.com/support. Important: Use the original Apple cables that came with your Mac Pro when you install or replace the optical drives. Installing
  • Apple MB535LL | User Guide - Page 39
    To install a hard disk drive: 1 Open your Mac Pro and remove the side panel following the instructions that begin on page 28. 2 Lift the latch to unlock the hard drive carriers. Important: When the latch is down, the carriers are locked in
  • Apple MB535LL | User Guide - Page 40
    4 Use the four screws on the carrier to attach the hard disk drive to the carrier. Important: If the printed circuit board is exposed on the
  • Apple MB535LL | User Guide - Page 41
    5 Lift the latch and then slide the carrier over the guides and into the drive bay, until it's seated in the bay and snaps into place. The connectors on the drive plug into the computer when
  • Apple MB535LL | User Guide - Page 42
    , set the drive to cable select mode if the manufacturer hasn't already done so. To replace the optical drive: 1 Open your Mac Pro and remove the side panel following the instructions on page 28. 2 Lift the latch to unlock the optical drive carriers. Important: When the latch is down, the drives and
  • Apple MB535LL | User Guide - Page 43
    4 Disconnect the power and ribbon cables from the optical drive and remove the carrier. Chapter 3 Working Inside Your Computer 43
  • Apple MB535LL | User Guide - Page 44
    5 Remove the optical drive from the carrier by unscrewing the four attachment screws. 6 Use the four screws from the original optical drive to attach the replacement drive to the carrier. Four extra screws 44 Chapter 3 Working Inside Your Computer
  • Apple MB535LL | User Guide - Page 45
    7 Slide the optical drive and carrier over the guides halfway into the drive bay, 8 Attach the power and ribbon cables to the back of the drive. Power cable middle connector Ribbon cable end connector Chapter 3 Working Inside Your Computer 45
  • Apple MB535LL | User Guide - Page 46
    9 Lift the latch and then slide the optical drive carrier into the drive bay, pushing it into place. Make sure the latch is up. 10 Replace the side panel and push the latch down to secure it. 46 Chapter 3 Working Inside Your Computer
  • Apple MB535LL | User Guide - Page 47
    cards. Before installing a card, check its specifications to make sure it can operate in your Mac Pro. To adjust the bandwidth of the PCI Express slots in your Mac Pro, use the Expansion Slot Utility, located on your startup disk in /System/Library/Core Services/. Important: Combined maximum power
  • Apple MB535LL | User Guide - Page 48
    2 Lay your Mac Pro down on a soft, clean cloth to avoid scratching it or the work surface. 3 Unscrew the captive screws in the PCI bracket and remove the bracket. 4 Remove the port access cover from the slot in which you plan to install the card. PCI bracket Port access cover To remove a card, push
  • Apple MB535LL | User Guide - Page 49
    remove the hard disk drives and carriers, and remove adjacent cards. If you have a full-length card, install the end of the card in the card guide first, and then align the card with the PCI slot to finish installing it. Secure the card with the PCI bracket. Insert the PCI bracket under the brace
  • Apple MB535LL | User Guide - Page 50
    the latch down to secure it. Replacing the Internal Backup Battery Your Mac Pro uses a CR 2032 Lithium battery that preserves settings, such as the date and time, when your Mac Pro is off. If you notice intermittent problems when your Mac Pro starts up or changes in the date and time settings, you
  • Apple MB535LL | User Guide - Page 51
    WARNING: Installing the battery incorrectly may cause an explosion. Use only the same type of battery or an equivalent recommended by new battery positive (+) side up. Remove the card in slot 1. Push on the tab to release the catch. 5 Replace the PCI Express cards that you removed (see page 47). 6
  • Apple MB535LL | User Guide - Page 52
  • Apple MB535LL | User Guide - Page 53
    Troubleshooting 4 4 If you have a problem while working with your Mac Pro, here are some things you can try right away. Occasionally you may have a problem while working with your Mac Pro. This chapter gives you some solutions to try. Problems with Your Mac Pro If your Mac Pro won't respond or
  • Apple MB535LL | User Guide - Page 54
    Mac Pro by choosing Apple () > Restart to be sure the problem is entirely cleared up. You can also restart by pressing the power (®) button for about 5 or 6 seconds until your Mac Pro shuts down. Press the power (®) button again to start up your Mac Pro. Â If the problem occurs only when you use
  • Apple MB535LL | User Guide - Page 55
    use. Quit applications that are open, and then try again. If that doesn't work, choose Apple memory, a PCI expansion card, problem: Â One short flash followed by a longer off period: No valid memory. Â Three short flashes followed by a longer off period: Failed memory. Chapter 4 Troubleshooting
  • Apple MB535LL | User Guide - Page 56
    . You have a problem using your computer or working with Mac OS X. Â Look in Mac Help (in the Help menu) for instructions and troubleshooting information. Â For the latest troubleshooting information and software updates, go to the Apple Support website at www.apple.com/support. 56 Chapter
  • Apple MB535LL | User Guide - Page 57
    instructions. Â For more information, search for "Software Update" in Mac Help. Â For the latest information about Mac OS X, go to the Mac OS X website at www.apple.com/macosx. Problems with AirPort Wireless Communication If you have trouble using may improve reception. Chapter 4 Troubleshooting 57
  • Apple MB535LL | User Guide - Page 58
    information, see the instructions that came with the wireless device or search for "AirPort" in Mac Help. Problems with Your Display WARNING: If you have a problem with your Apple display and nothing in this manual solves it, contact an Apple Authorized Service Provider or Apple for assistance. If
  • Apple MB535LL | User Guide - Page 59
    start up using the software Apple () > System Preferences. Click Displays, select Color, and click Calibrate. For more information on color and your display, see Mac Help. Â The flickering may be caused by interference from a nearby power Mac Help. After you change the screen resolution, desktop
  • Apple MB535LL | User Guide - Page 60
    up your Mac Pro. The light on the front of the display is flashing. On some Apple flat panel displays, the power light displays a series of short flashes when an error is detected. Â If you see a repeating sequence of three short flashes, the display is detecting input in the wrong video format
  • Apple MB535LL | User Guide - Page 61
    instructions. If Network Diagnostics can't resolve the problem, there may be a problem with the Internet service provider (ISP) you are trying to connect to, with an external device you are using to the wall jack. Check the cables and power supplies for Ethernet hubs and routers. Turn the modem
  • Apple MB535LL | User Guide - Page 62
    Check the cables and power supplies to your Ethernet hubs and using an AirPort Base Station, check Mac Help or visit the Apple AirPort website at www.apple.com/support/ airport. If you cannot resolve the issue using these steps, contact your ISP or network administrator. 62 Chapter 4 Troubleshooting
  • Apple MB535LL | User Guide - Page 63
    of the error code before pursuing support options. If Apple Hardware Test does not detect a hardware failure, the problem may be software-related. For more information about Apple Hardware Test, see the Apple Hardware Test Read Me file on the Mac OS X Install Disc 1. Chapter 4 Troubleshooting 63
  • Apple MB535LL | User Guide - Page 64
    . Apple is not responsible for any lost data. Installing Mac OS X To install Mac OS X: 1 Back up your important files, if possible. 2 Insert the Mac OS X Install Disc 1 that came with your computer. 3 Double-click "Install Mac OS X and Bundled Software." 4 Follow the onscreen instructions. 5 Select
  • Apple MB535LL | User Guide - Page 65
    Mac OS X" instructions above. Maximizing Ethernet Performance Your computer performs best when the Ethernet port to which it is connected is set to autonegotiate. Ask your network administrator to verify this setting. Important: If you experience connection problems . Chapter 4 Troubleshooting 65
  • Apple MB535LL | User Guide - Page 66
    . To open System Profiler, choose Apple () > About This Mac from the menu bar and then click More Info. Apple Hardware Test You can use Apple Hardware Test to diagnose hardware problems on your Mac Pro. For more information, see "Using Apple Hardware Test" on page 63. 66 Chapter 4 Troubleshooting
  • Apple MB535LL | User Guide - Page 67
    AppleCare Service and Support Information Your Mac Pro comes with 90 days of telephone support and one year of service coverage at an Apple-authorized repair center. You can extend your coverage by purchasing the AppleCare Protection Plan. For more information, visit the website address for your
  • Apple MB535LL | User Guide - Page 68
    the serial number of your Mac Pro. Open System Profiler, located in the Utilities folder in the Applications folder, and click the System Profile tab. The serial number is also on the configuration label, which is located on the back of your Mac Pro near the video ports. 68 Chapter 4 Troubleshooting
  • Apple MB535LL | User Guide - Page 69
    )  Eight DIMM slots available (four slots per memory card)  Error-correcting code (ECC)  72-bit wide, 240-pin modules  36 memory devices maximum per DIMM  Contain an Apple-approved heat sink (for best acoustic performance)  Conform to JEDEC specification (see page 32)  Maximum height of 31
  • Apple MB535LL | User Guide - Page 70
    the amount of memory. Graphics Card PCI Express graphics card with two Digital Visual Interface (DVI) connectors. Video Display Modes For technical specifications for your display: Â Apple displays: Go to www.apple.com/displays. Â Non-Apple displays: Go to www.apple.com/guide. SuperDrive (DVD+R DL
  • Apple MB535LL | User Guide - Page 71
    Enhanced CD  DVD-Video  DVD±R  DVD±RW  DVD+R DL USB Specifications  Support for Universal Serial Bus (USB) 2.0 and 1.1  Seven external USB Type A ports  Two USB 2.0 ports on the front  Three USB 2.0 ports on the back  Two USB 1.1 ports on the Apple Keyboard  Each rear port is on a separate
  • Apple MB535LL | User Guide - Page 72
     Output voltage: Approximately 12 V  Output power: Up to a maximum of 28 W for all 4 ports or 7 W for any one port Ethernet Specifications  IEEE 802.3 compliant  Maximum cable length: 100 meters (m)  Protocols: Open Transport, AppleShare, AppleTalk, NetWare for Macintosh, TCP/IP  Connector
  • Apple MB535LL | User Guide - Page 73
    (Optional)  Frequency band: 2.4 and 5 gigahertz (GHz)  Radio output power: 20 dBm (nominal) Compatibility  802.11a, b, g, and draft n Optical Digital Audio Specifications  Data format: Sony/Phillips Digital Interface (S/PDIF) protocol (IEC60958-3)  Connector type: TOSLINK optical (IEC60874
  • Apple MB535LL | User Guide - Page 74
    Specifications  Sample rate: 44.1 kHz, 48 kHz, or 96 kHz  Jack type: 1/8" mini  Bits per sample: 16-bit or 24-bit  Frequency response: 20 Hz to 20 kHz, +0.5 dB/-3 dB Analog audio out using ) (+5.1 dBµ)  Output impedance: 24 ohms  Output power: 90 milliwatts (mW)  Signal-to-noise ratio: Greater
  • Apple MB535LL | User Guide - Page 75
    Power Supply cards Combined maximum power consumption for all four PCI Express slots should not exceed 300 watts (W). USB devices Each of the computer's built-in USB ports is allotted 500 mA. FireWire devices The computer can provide up to 28 W total to the FireWire ports. Appendix A Specifications
  • Apple MB535LL | User Guide - Page 76
    and Battery Your computer has CMOS custom circuitry with a long-life battery. Battery Use a 3-volt, CR 2032 Lithium coin cell replacement battery (see "Replacing the Internal  Relative humidity: 5% to 95% (noncondensing)  Altitude: 0 to 3048 meters (0 to 10,000 feet) 76 Appendix A Specifications
  • Apple MB535LL | User Guide - Page 77
    procedures, routine maintenance, and ergonomic considerations for using your computer and display. Important Safety Information The only way to disconnect power completely from your computer is to unplug the power cord from the main power supply. To disconnect your display completely, you must
  • Apple MB535LL | User Guide - Page 78
    period of time, remove the battery. For service or questions about your warranty, contact an Apple Authorized Service Provider or Apple. Service and support information is included with your computer's documentation. Apple and the Environment At Apple, we recognize our responsibility to minimize the
  • Apple MB535LL | User Guide - Page 79
    't bump into anything when it opens. Â Close the drive when you're not using it. Â Do not put anything on the drive tray when it is open. other abrasive surface. If you need to clean the lens, see an Apple Authorized Service Provider for a lens cleaner. Â Keep your computer away from any source
  • Apple MB535LL | User Guide - Page 80
    support your lower back (lumbar region). Follow the manufacturer's instructions for adjusting the backrest to fit your body properly. Â When you use the your feet. Or you can lower the desktop to eliminate the need for a footrest. Another option is to use a desk with a keyboard tray that's lower
  • Apple MB535LL | User Guide - Page 81
    reflections on the screen from overhead lights and nearby windows. If possible, use a tiltable display stand. The stand lets you set the display at the slightly Screen positioned to avoid reflected glare Lower back supported Clearance under work surface Thighs tilted slightly Feet flat
  • Apple MB535LL | User Guide - Page 82
    For more information about health, safety, and maintenance, go to the Apple ergonomic website at www.apple.com/about/ergonomics. Avoid Hearing Damage WARNING: Permanent hearing loss may occur if earbuds or headphones are used at high volume. You can adapt over time to a higher volume of sound that
  • Apple MB535LL | User Guide - Page 83
    is not installed and used properly-that is, in strict accordance with Apple's instructions-it may cause interference with radio and television reception. This equipment has been tested and found to comply with the limits for a Class B digital device in accordance with the specifications in Part 15
  • Apple MB535LL | User Guide - Page 84
    use due to its operation in the 5.15 to 5.25 GHz frequency range to reduce the potential for harmful interference to cochannel Mobile Satellite systems. Cet appareil doit être utilisé à l'intérieur. Exposure to Radio Frequency Energy The radiated output power of the AirPort Card B specifications. Cet
  • Apple MB535LL | User Guide - Page 85
    Korea Keyboard Statement Korea Statements Singapore Wireless Certification Taiwan Statement Taiwan Class B Statement VCCI Class B Statement Mouse Class 1 LED Information The Apple Mighty Mouse is a Class 1 LED product in accordance with IEC 60825-1 A1 A2. It also complies with the Canadian ICES-003
  • Apple MB535LL | User Guide - Page 86
    Mac Pro to the phone line using an external USB modem, refer to the telecommunications agency information in the documentation that came with your modem. Apple and the Environment Apple information is available on the web at: www.apple.com/environment Disposal and Recycling Information This symbol
  • Apple MB535LL | User Guide - Page 87
    Taiwan: European Union-Disposal Information The symbol above means that according to local laws and regulations your product should be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities. Some
  • Apple MB535LL | User Guide - Page 88
  • Apple MB535LL | User Guide - Page 89
    VGA 9 AirPort 73 Analog 21 analog audio 74 line in 21, 74 line out 21, 74 AppleCare Service and Support 67 Apple Hardware Test 66 applications force quit 54 freezing 56 installing 64 problems 56 assistants Setup Assistant 12 B battery disposal 86 internal backup battery 23 replacing 50 Bluetooth 72
  • Apple MB535LL | User Guide - Page 90
    19 problems connecting to Internet 61 processor 69 protective film 5 R RAM 23, 69 reset the PRAM 54 S safety information 77 screen freezes 60 Serial ATA drive 38 serial number 68 service and support information 67 shutting off power 6, 14, 28 sleep 13, 17 software updating 57 specifications 69
  • Apple MB535LL | User Guide - Page 91
  • Apple MB535LL | User Guide - Page 92
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
Mac Pro
User’s Guide
Includes setup, expansion,
and troubleshooting
information for your
Mac Pro computer