Asko D5233 User manual Use & Care Guide Asko D5233 EN - Page 11
Press start, Standby mode
View all Asko D5233 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Basic Course Press start The dishwasher will now start. It manages the entire wash automatically. Ensure that the door is properly closed or the machine will not start. Changing program If you want to change program after having started the machine, press the Start/Stop button for three seconds. Then select a new program and press the Start/Stop button. Make sure there is detergent in the dispenser. 7 Standby mode Once the machine has finished, it only draws standby current. Should you wish to disconnect the power completely, just switch off at the main power switch. Turn off the water faucet if the machine is not to be used for an extended period, such as during vacations, for example. Do you want to load more dishes? Carefully open the door; the machine will stops automatically, put in the dishes, close the door and the dishwasher will continue from where it left off. If the machine is switched off at the main switch (or in the event of a power cut) before the washing program has been completed, the interrupted program will continue when the power comes back on. Note! If the power is switched off, or if the door is open during drying, the program is interrupted. Customer Care Center 1-800-898-1879 www.askousa.com 11