Asko D5233 User manual Use & Care Guide Asko D5233 EN - Page 21
Settings - reset
View all Asko D5233 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Settings Reprogramming Some of the machine's functions can be reprogrammed. You get into the machine's change program using the machine's ordinary buttons as per the instructions below. The selection will be retained until the next time you reset this function. Even if the machine is turned off at the main switch or loses power for any other reason, all selections registered before the interruption of power will be retained. Child-safe button lock You can prevent a child starting the machine by accident or changing the settings by programming the machine with a button lock, which requires the Temperature and Drying buttons to be pressed simultaneously to start up the machine. The button lock will automatically be reactivated after three minutes. + 1. Switch off the dishwasher with the main switch. 2. Hold in the Temperature and Drying buttons while pressing the main switch. The Temperature, Drying and start symbols will flash. Release the Temperature and Drying buttons. PROG START STOP 3. Press the Program button - when the Auto wash symbol is lit, the button lock has been activated 4. Then press the Start/Stop button to store the setting. or Reset: 1. Switch off the dishwasher with the main switc. + 2. Hold in the Temperature and Drying buttons at the same time as pressing the main switch PROG 3. Press the Program button - when the Auto wash symbol goes out, the button lock has been deactivated START STOP 4. Then press the Start/Stop button to confirm the setting. Customer Care Center 1-800-898-1879 www.askousa.com 21