Asko T753C User manual 8090243 Asko T753C AE - Page 13

Operating instructions 6Press the Start button Remaining drying time An estimate of the remaining drying time will be shown on the display a few minutes after the drying program starts. For example, "1:35" means it will take approximately 1 hour and 35 minutes for the load to dry. The actual remaining time may be longer than the estimated time shown on the display. The remaining time is then shown as "0:15" until the laundry is sufficiently dry. If you selected Time Saver, the display will show "0:05" instead. Stopping or changing a program Press and hold the Stop button for three seconds. NOTE! The program will not be affected if you change the program selector after the program has started. Loading or removing laundry You can stop the tumble dryer after starting a program by opening the door. Load more laundry or take out the items you want, close the door, and press the Start button. A new estimate of the remaining program time will be displayed after a few minutes. 7Drying program finished The text "End" appears on the display when the program is finished. If the Anti Wrinkle option has been selected, the drum will rotate for three seconds every minute for two hours after the program is finished. NOTE! • Clean the lint filter after each load. See the "Care and cleaning" chapter. To install the automatic drain hose, please see the section titled Installation WARNING! If the lint filter becomes clogged, the machine's automatic overheating cut-off may be triggered. In order to be able to restart the machine, you must clean the filter and allow the machine to cool down for around 30 minutes. Once drying has finished Turn off the main power switch. Remove the clothes and close the door to prevent small children from climbing into the machine. Customer Care Center 13 1-800-898-1879 www.askousa.com