Asko T753C User manual 8090243 Asko T753C AE - Page 16

Troubleshooting The machine will not start Check • that the door is properly closed. • that the main power switch is on. • that the Delayed Start option has not been selected. If so, the time remaining until start will be shown in full hours on the display (e.g., 5, 4, 3h). To cancel Delayed Start, press the Start/Stop button for 3 seconds. • that any plug is connected. • that the fuses (circuit breakers) in your house are intact. Flip the dryer breaker off and then back on to make sure. You can not always tell from the outside if the circuit breaker has tripped. • that the overheating cut-off has not been triggered (see below). Overheating cut-off The overheating cut-off shuts off the tumble dryer if the temperature is too high, caused by lint clogging the lint filter, for instance. • Clean the lint filter. • Check that the condenser is clean. Clean it if necessary. See the "Care and cleaning" chapter. • The overheating cut-off will reset automatically once the machine has cooled down. Drying takes too long • Check that the lint filter and the condenser are not blocked. See the "Care and maintenance" chapter. • Prolonged drying times may also be due to the tumble dryer being located in a confined space or room that is too small, causing the air to become too hot. • Make sure that the tumble dryer has access to more cold air, open doors and/or windows. The laundry does not dry, or is too dry • The door has been opened while the program is running, which disrupts the moisture monitoring function. Error messages If F30 is flashing on the display, the maximum permitted program time has been reached. Check that the lint filter and the condenser are not blocked. See the "Care and cleaning" chapter. 16 Customer Care Center 1-800-898-1879 www.askousa.com