Asko T760 User manual Quick Start Guide T760 - T780 (Quick Start Guide)

Start

Stop

P1

P2

P3

P4

Menu

Ente r

We know you’re excited about owning an ASKO dryer and you’re anxious to get started, so here is a brief summary of the operating

procedures. To get the most of the features of your machine, we recommend that you read your

Use and Care Guide

.

THE CONTROL PANEL

THE CONTROL PANEL

Models T760 and T780 have ASKO’s state-of-the-art EasyControl™ panel, as illustrated below. To select a program, simply press one of the

preset program buttons then press Start. Refer to “Preset Programs” below for a definition of these programs.

Stop Button

Press to stop

a program.

Preset Programs

Press one of these buttons

to select a program.

LED Window

Displays the program, temperature settings,

and program run time.

Dryer Quick Start Guide

T760/T780

Power Button

Press to turn on power

to the machine.

Program Selection Controls

These buttons allow you to customize the preset program

settings, such as temperature settings, turning the buzzer off,

setting delay start time, etc. Refer to the

Use and Care Guide

for instructions.

Power Indicator Light

Glows when the power

is turned on.

Power Button

Power Button

The Power button turns the power to the machine on and off. When the power is on, the power indicator light glows red. The power

must be on before you can set the programs or start the machine.

Start and Stop Buttons

Start and Stop Buttons

These buttons start or stop a program. If you open the door during a program, the dryer will stop tumbling automatically. If you

interrupt a program by opening the door, the dryer will remember where in the program it stopped. To continue the program, close

the door and press Start.

You can also interrupt a program by pressing Stop for three seconds. If you stop the dryer this way, however, it cancels the

program in progress. You will have to select a new program to restart.

Preset Programs

Preset Programs

There are four preset programs, as defined in the table below. To select a program, simply press one of the program buttons and press Start.

For additional programming options, refer to the

Use and Care Guide

.

With ASKO’s Sensidry™ system, you need never worry about overdrying your laundry. Just select the proper program for the type of fabric

you’re drying and Sensidry does the rest. Once you select a program, Sensidry monitors the temperature and measures the humidity level.

When it detects the appropriate measurements, it automatically shuts off the machine.

Preset

Dry

Program

Program

Types of Laundry

Temp

Anti-Crease

Buzzer

P1

Extra Dry

Heavy fabrics, such as denim jeans

Normal

1 hour

On

P2

Dry

Towels, cotton, linen, etc.

Normal

1 hour

On

P3

Normal Dry

Permanent press, synthetics, etc.

Normal

1 hour

On

P4

Iron Dry

Washable silk, acrylics, etc.

Low *

1 hour

On

ASKO’s EasyControl™ panel makes it simple to customize the preset programs to perfectly fit your laundry needs. For example, you can

reprogram the dry temperature, change the cool-down time, set a delayed start, etc. For instructions, refer to “Customizing the Preset

Programs” in your

Use and Care Guide

.

Start

Stop

Start Button

Press to start

a program.

* The dry temperature for Program P4 on Model T780 is Normal.