Asko W6761 User manual General Use & Care Guide EN - Page 19

Delayed Start This lets you set a delayed start from 1 to 24 hours. This means you can set the washer to start at the most convenient time for you, such as an hour before you arrive home from work. This feature is also useful in areas where utility companies offer discount rates during off-peak hours. 1. Press MENU until "Select time for delayed start" displays. 2. Use the Arrow buttons to increase or decrease the delay time. (The numbers indicate hours.) 3. When the number of hours you want to delay starting the machine displays, press ENTER. The LCD will display the delay start time. 4. If you only want to use this setting temporarily (for this one load), press START. When the program ends it will revert back to the previous setting. 5. If you want to save this setting permanently, press ENTER again then press START. The program will retain the change. Selecting Options This lets you select Super Rinse, ECO (Economy), Presoak, Anti-crease, or High Water Level. 1. Press MENU until "Select options" displays. 2. Continue to press MENU to scroll through the options. 3. When the option you wish to select displays, press an Arrow to toggle between Off and On. 4. Press ENTER. The LCD will display the new setting. 5. If you only want to use this setting temporarily (for this one load), press START. When the program ends it will revert back to the previous setting. 6. If you want to save this setting permanently, press ENTER again then press START. The program will retain the change. RESTORING A PRESET PROGRAM To restore a preset program to its factory default settings, simply press the button for the preset program you want to restore and hold it down while your press ENTER. The program will revert to its factory default settings. NOTE: If you change the P3 program then decide to restore its factory default settings, after pressing P3 and ENTER, you must go into the Options menu (see "Selecting Options" above) and turn off Short Spin. CHANGING THE LANGUAGE ON THE LCD WINDOW There are eleven languages available for the LCD window: ♦ English ♦ French ♦ Spanish ♦ Portuguese ♦ Italian ♦ German ♦ Swedish ♦ Danish ♦ Norwegian ♦ Netherlands ♦ Finnish To change the language, follow the steps below: 1. Turn the machine off then on again. 2. Press ENTER five times in succession then press P1 five times. (This must be done within 15 seconds.) 3. When the Language menu displays, press to advance to the desired language. 4. When your preference displays, press ENTER. CHANGING THE TEMPERATURE READOUT ON THE LCD WINDOW FROM CELSIUS TO FAHRENHEIT You can change the temperature readout on the LCD window from Celsius to Fahrenheit and vice versa. To do this follow the steps below: 1. Turn the machine off then on again. 2. Press ENTER five times in succession then press P2 five times. (This must be done within 15 seconds.) 3. When the Temperature menu displays, press an Arrow button to toggle between Fahrenheit and Celsius. 4. When your preference displays, press ENTER. CHILD-SAFE START BUTTON As a safety measure, you can program Model W6761 not to start unless the Start button is held down for three seconds. To do this, follow the steps below: 1. Turn the machine off then on. 2. Press ENTER five times, then press P3 five times. (This must be done within 15 seconds.) 3. "Delayed start" displays with "0" flashing in the lower right corner. Press the right Arrow button to toggle the display to "3." 4. Press ENTER. CHILD-SAFE MENU BUTTON Please note that when you set the child-safe Start button, the Menu button is automatically programmed to delay for three seconds before it becomes active. This prevents a child from accidentally changing the program settings. When you want to change a program, press the Menu button for three seconds to activate the menus. The Menu button will work normally (without the 3-second delay) until you have completed your changes. If it is not pressed for two minutes, it will automatically revert back to the child-safe mode. Page 19