Asus ASUS Fonepad 7 Dual SIM Setup Guide

Asus ASUS Fonepad 7 Dual SIM Manual

Asus ASUS Fonepad 7 Dual SIM manual content summary:

  • Asus ASUS Fonepad 7 Dual SIM | Setup Guide - Page 1
    1. Check Image Version Please follow the path below to check the image version before and after image update: Enter [Settings] [About phone] Find the [Build number] to check the image version. 2. Requirement  A windows PC  A USB cable  The battery life of device has to be more that 15% 3.
  • Asus ASUS Fonepad 7 Dual SIM | Setup Guide - Page 2
    internal sdcard storage. Step 6: Disconnect the device from your PC. Step 7: Then, a detecting notification (an exclamation mark) will show up on the top left corner of the screen. Step 8: Pull down the notification list and select "System Update File Detected". Step 9: Select the image package
  • Asus ASUS Fonepad 7 Dual SIM | Setup Guide - Page 3
    Step 10: After the system update is confirmed in the "System Update Available" window, the device will automatically reboot and go into the recovery mode to update the image.
  • Asus ASUS Fonepad 7 Dual SIM | Setup Guide - Page 4
    Step 11: When the updating is completed, device will automatically reboot and show "Android is upgrading..." message (It will take about 5 minutes to enter Android system after image upgrading). Step 12: Check the "build number" in "Settings" to see if the image has been correctly updated.
  • 1
  • 2
  • 3
  • 4

1.
Check Image Version
Please follow the path below to check the image version before and after image
update:
Enter [Settings]
[About phone]
Find the [Build number] to check the image
version.
2.
Requirement
A windows PC
A USB cable
The battery life of device has to be more that 15%
3.
Updating Image Through Detecting Notification
Download the zipped image files (about 3 or 4 zipped files) to your
Step 1:
Windows PC.
Double click the first zipped file with “exe.” in the end of the file name.
Step 2:
Then, it will start to extract all of 3 or 4 zipped files.
After extracting, go into the extracted folder, you will get a zip file with
Step 3:
prefix “UL
-
K00G” (ex: “UL
-K00G-WW-10.16.1.3.1-
userdebug.zip”).
Connect the device with your PC.
Step 4:
Place the zip file with prefix “UL
-
K00G” to the root dir
ectory of the
Step 5: