Asus Blitz Formula Motherboard Installation Guide
Asus Blitz Formula Manual
 |
View all Asus Blitz Formula manuals
Add to My Manuals
Save this manual to your list of manuals |
Asus Blitz Formula manual content summary:
- Asus Blitz Formula | Motherboard Installation Guide - Page 1
Installing Fusion Block System accessory Install your watercooling system to the motherboard using the bundled accessories to obtain the best thermal solution. Package contents 3/8" ID tubes x 2 1/2" to 3/8" ID fittings x 2 10mm to 3/8" ID fittings x 2 1/2" ID t�u��b�e��c�l�ip�s��x��2� 3/8" ID - Asus Blitz Formula | Motherboard Installation Guide - Page 2
For watercooling system with 1/2" or 10mm ID tubes 1. Insert a fitting (1/2" to 3/8" ID or 10mm to 3/8" ID) into the tube. Your watercooling system may come with tube clips. Use the clips to fasten the fittings and the tubes together. 2. Connect a supplied 3/8" ID tube to the fitting. 3. Firmly
-
1 -
2
 |
 |
Installing Fusion Block System accessory
±
Installing Fusion Block System accessory
Install your watercooling system to the motherboard using the bundled accessories
to obtain the best thermal solution.
Package contents
1
2
For watercooling system with 3/8” ID tubes
1.
Firmly press a tube clip and fit the tube into the clip.
2.
Press the clip and connect the tube to the waterblock. When done, release
the clip to tighten the two together.
3.
Repeat Step ± and 2 for another tube. Make sure that both tubes are well
connected to prevent leak, and then fill the coolant into the reservoir.
3/8” ID tubes x 2
1/2” to 3/8” ID fittings x 2
10mm to 3/8” ID fittings x 2
±/2” ID tube clips x 2
tube clips x 2
3/8” ID tube clips x 6