Asus CROSSHAIR V FORMULA/THUND User Manual

Asus CROSSHAIR V FORMULA/THUND Manual

Get Asus CROSSHAIR V FORMULA/THUND PDF manuals and user guides View all Asus CROSSHAIR V FORMULA/THUND manuals
Add to My Manuals
Save this manual to your list of manuals

Asus CROSSHAIR V FORMULA/THUND manual content summary:

  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 1
    Motherboard Crosshair V Formula Series
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 2
    Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. ASUS PROVIDES THIS MANUAL "AS IS" WITHOUT WARRANTY
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 3
    Frequency Bands ix IC Radiation Exposure Statement for Canada x Safety information xi About this guide xiii Crosshair V Formula specifications summary xv ROG ThunderBolt specifications summary xviii Chapter 1: Product introduction 1.1 Welcome 1-1 1.2 Package contents 1-1 1.3 Special features
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 4
    installation 2-34 2.3.4 DIMM installation 2-37 2.3.5 Motherboard installation 2-38 2.3.6 ATX Power connection 2-40 2.3.7 SATA device connection 2-41 2.3.8 Front I/O Connector 2-42 2.3.9 Expension Card installation 2-43 2.3.10 ROG ThunderBolt Installation 2-44 2.3.11 Rear panel connectors
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 5
    2 Utility 3-43 3.10.3 ASUS BIOS Updater 3-45 Chapter 4: Software support 4.1 Installing an operating system 4-1 4.2 Support DVD information 4-1 4.2.1 Running the support DVD 4-1 4.2.2 Drivers menu 4-2 4.2.3 Utilities menu 4-3 4.2.4 Make disk menu 4-4 4.2.5 Manual menu 4-4 4.2.6 Video menu
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 6
    Contents 4.3.10 ThunderBolt Audio 4-31 4.3.11 Sound Blaster X-Fi MB 2 4-35 4.4 RAID configurations 4-38 5: Multiple GPU technology support 5.1 ATI® CrossFireX™ technology 5-1 5.1.1 Requirements 5-1 5.1.2 Before you begin 5-1 5.1.3 Installing CrossFireX graphics cards 5-2 5.1.4 Installing the
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 7
    , if not installed and used in accordance with manufacturer's instructions, may cause harmful interference to radio communications. However, there use of shielded cables for connection of the monitor to the graphics card is required to assure compliance with FCC regulations. Changes or modifications
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 8
    or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Declaration of Conformity (R&TTE directive 1999/5/EC) The following items
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 9
    89 Yonne 90 Territoire de Belfort 94 Val de Marne This requirement is likely to change over time, allowing you to use your wireless LAN card in more areas within France. Please check with ART for the latest information (www.art-telecom.fr) Your WLAN
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 10
    must follow the specific operating instructions for satisfying RF exposure compliance To prevent radio interference to the licensed service (i.e. co-channel Mobile Satellite systems) this manual to meet RF exposure requirements. Use of this device in a manner inconsistent with this manual could lead
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 11
    to fix it by yourself. Contact a qualified service technician or your retailer. • The optical S/PDIF is an optional component (may or may not be included in your motherboard) and is defined as a CLASS 1 LASER TYPE. • DISPOSE OF USED BATTERIES ACCORDING TO THE ABOVE BATTERY-RELATED INSTRUCTIONS. xi
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 12
    • Before installing the motherboard and adding devices on it, carefully read all the manuals that came with the package . • If you encounter technical problems with the product, contact a qualified service technician or your retailer. DO NOT throw the motherboard in municipal waste. This product has
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 13
    need when installing and configuring the motherboard. How this guide is organized This guide contains the following parts: • Chapter 1: Product introduction This chapter describes the features of the motherboard and the new technology it supports. • Chapter 2: Hardware information This chapter lists
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 14
    the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORTANT: Instructions that you MUST follow to complete
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 15
    Crosshair V Formula specifications summary CPU. Chipset System Bus Memory Expansion Slots Multi-GPU Technology Storage LAN High Definition Audio AMD socket for AM3+ FX™/Phenom™ II/Athlon™ II/ Sempron™ 100 Series Processors Supports 32nm CPU, up to 8 cores AMD Cool 'n' Quiet™ Technology AMD 140W
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 16
    Crosshair V Formula specifications summary USB ROG Exclusive Overclocking Features Other Special Features BIOS Features ASUS C.P.R.(CPU Parameter Recall) Core Unlocker ASUS Fan Xpert ASUS Q-Connector ASUS Q-Shield ASUS Q- LED (CPU, DRAM, VGA, Boot Device LEDs) Ai Charger+ ASUS EZ Flash 2 ASUS
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 17
    Crosshair V Formula specifications summary Internal I/O Connectors Software Form Factor 1 x USB 3.0/2.0 connector supports additional 2 USB 3.0/2.0 ports 2 x USB 2.0/1.1 connectors support Utility Kaspersky® Anti-Virus DAEMON Tools Pro Standard ROG CPU-Z ASUS Utilities ATX Form Factor, 12"x 9.6" (
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 18
    ROG ThunderBolt specifications summary ThunderBolt LAN/ Audio Combo Card Dedicated Network Processing Unit (NPU) - Advanced Game Detect™ - 24-bit) - Analog-to-Digital Converter: 114dB (Max. 192KHz/24-bit) - Supports 3 Headphone Impedance Gain Modes (up to 300 ohms) - Fine-tuned Game Genre EQ
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 19
    This chapter describes the motherboard features and the new technologies it supports. Chapter 1: 1Product introduction
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 20
    Chapter summary 1 1.1 Welcome 1-1 1.2 Package contents 1-1 1.3 Special features 1-2 ROG Crosshair V Formula
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 21
    Label 1 x 12-in-1 ROG SATA Cable Label 1 x I/O Shield ROG motherboard support DVD User guide *ROG ThunderBolt Audio Precision Test Report If any of the above items is damaged or missing, contact your retailer. *The ThunderBolt is only available on selected models. ROG Crosshair V Formula 1-1
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 22
    motherboard supports DDR3 2133(O.C.) that provides faster data transfer rate and more bandwith to increase memory computing efficiency, enhancing system performance in 3D graphics and other memory demanding applications. Refer to www.asus.com for the supported CPU models. 1-2 Chapter 1: Product
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 23
    motherboard supports the latest PCIe 2.0 devices for double speed and bandwidth which enhances system performance. 1.3.2 ROG ThunderBolt LAN/Audio Combo Built-in Headphone Amp. Sound GREATER The ROG ThunderBolt is a dedicated LAN/audio combo card designed for gamers. With the ROG ThunderBolt
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 24
    to pwn your opponents. iROG Intelligent multiple control at hand The iROG is a special IC which enables several ROG highlighted functions that gives users full disposal of the motherboard at any stage! This design allows advanced user control and management to be processed purely at a hardware
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 25
    motherboard will do the rest! See the new CPU speed and enjoy that performance instantly. Overclocking is never as easy as this. GPU.DIMM Post Easily check the status of your graphics cards and memory in the BIOS! Notice potential problems system booting success. ROG Crosshair V Formula 1-5
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 26
    support for the CPU is critical during overclocking. The Loadline Calibration ensures stable and optimal CPU voltage under heavy loading. It helps overclockers enjoy the motherboard SupremeFX X-Fi 2 delivers incredible gaming audio experiences to ROG die hards. It features EAX 5.0 and OpenAL for
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 27
    Supporting next-generation Serial ATA (SATA) storage interface, this motherboard delivers up to 6Gb/s data transfer rates. Additionally, get enhanced scalability, faster data retrieval, double the bandwidth of current bus systems. ASUS Fan Xpert ASUS industry's highest. ROG Crosshair V Formula 1-7
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 28
    1-8 Chapter 1: Product Introduction
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 29
    This chapter lists the hardware setup procedures that you have to perform when installing system components. It Chapter 2: includes description of the jumpers and connectors on the motherboard. 2 Hardware information
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 30
    Chapter summary 2 2.1 Before you proceed 2-1 2.2 Motherboard overview 2-2 2.3 Building your computer system 2-32 2.4 Starting up for the first time 2-50 2.5 Turning off the computer 2-51 ROG Crosshair V Formula
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 31
    Before you proceed Take note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before so may cause severe damage to the motherboard, peripherals, or components. ROG Crosshair V Formula 2-1
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 32
    2.2 Motherboard overview 2.2.1 Motherboard layout 2-2 Chapter 2: Hardware information
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 33
    17. Digital audio connector (4-1 pin SPDIF_OUT) 18. ROG connect switch (3-pin ROG) Page 2-25 2-4 2-22 2-5 2-29 2-23 2-21 2-19 2-20 2-18 2-26 2-20 2-28 2-28 2-30 2-24 2-23 2-29 Refer to 2.2.8 and 2.3.11 for more information about internal and rear panel connectors. ROG Crosshair V Formula 2-3
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 34
    2.2.3 Central Processing Unit (CPU) The motherboard comes with an AM3+ socket designed for AMD® Next Generation CPU up to 8-core, also compatible with AMD® socket AM3 for AMD® Phenom™ II/Athlon™
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 35
    2.2.4 System memory The motherboard comes with four Double Data Rate 3 (DDR3) Dual Inline Memory Modules (DIMM) slots. A DDR3 module is notched differently from a DDR or DDR2 module. DO NOT install a DDR or DDR2 memory module to the DDR3 slot. ROG Crosshair V Formula 2-5
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 36
    on the motherboard. For more details, refer to the Microsoft® support site at http://support.microsoft.com/kb/929605/en-us. • This motherboard does not support DIMMs made menu for manual memory frequency adjustment. • For system stability, use a more efficient memory cooling system to support a full
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 37
    Crosshair V Formula Motherboard Qualified Vendors Lists (QVL). DDR3 1333 MHz capability -CG - NANYA NT5CB128M8AN-CG - Team Team T3D1288LT-13 T3D1288LT-13 7-7-7-21 7-7-7-21 ROG Crosshair V Formula Voltage DIMM socket support (Optional) 2 DIMM 4 DIMM - • • 1.25~1.35 • • - •
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 38
    Crosshair V Formula Motherboard Qualified Vendors Lists (QVL). DDR3 1600 MHz 8-9-8-24 - 8-8-8-24 - 7-7-7-20 - 7-7-7-20 - 8-9-8-24 T3D1288RT-16 8-8-8-24 T3D1288RT-16 8-8-8-24 Voltage DIMM socket support (Optional) 2 DIMM 4 DIMM 1.55~1.75 • 1.55~1.75 • • 1.6 • • 1.5 • • 1.65
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 39
    socket support (Optional) 1 DIMM 2 DIMM 4 DIMM 1.65 • • • 1.6 • • 1.65 • • • Crosshair V Formula Motherboard 1.65 • • • - - 9-9-9 1.65 • - - 10-10-10 1.65 • • - - 9-9-9 1.65 • - - 8-8-8-24 - • Team T3D1288RT-16 9-9-9-24 1.65 • • • ROG Crosshair V Formula 2-9
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 40
    1.65 1.65 1.65 DIMM socket support (Optional) 1 DIMM 2 DIMM 4 DIMM • • • • • • • • • • • • • • • • • 1.65 • 1.65 • 1.65 • 1.65 • 1.65 • 1.65 • 1.6 • • 1.65 • 1.65 • 1.65 • • 1.5 • 1.6 • Crosshair V Formula Motherboard Qualified Vendors Lists (QVL). DDR3
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 41
    cards on shared slots, ensure that the drivers support "Share IRQ" or that the cards do not need IRQ assignments. Otherwise, conflicts will arise between the two PCI groups, making the system unstable and the card inoperable. Refer to the table on the next page for details. ROG Crosshair V Formula
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 42
    the PCI Express specifications. Refer to the figure below for the location of the slot. PCI Express x16 slots This motherboard has four PCI Express x16 slots that support PCI Express x16 cards complying with the PCI Express specifications. Refer to the figure below for the location of the slot. VGA
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 43
    default. • You may manually reassign the link width of motherboard connector labeled CHA_FAN1/2/3 when using multiple graphics cards for better thermal environment. IRQ assignments for this motherboard shared - - - - - - - PCIE_X1_1 - - - - - - - shared ROG Crosshair V Formula 2-13
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 44
    2.2.6 Onboard LEDs The motherboard comes with a set of LEDs that indicate the voltage conditions of CPU, memory, northbridge and southbridge. You may adjust the voltages in BIOS. There are
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 45
    written into or read from the hard disk drive. The LED does not light up when there is no hard disk drive connected to the motherboard or when the hard disk drive does not function. ROG Crosshair V Formula 2-15
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 46
    when in OS. 6. Q LED Q LEDs check key components (CPU, DRAM, VGA card, and booting devices) in sequence during motherboard booting process. If an error is found , the corresponding LED will continue lighting until the problem is solved. This user-friendly design provides an intuitional way to locate
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 47
    in soft‑off mode. This is a reminder that you should shut down the system and unplug the power cable before removing or plugging in any motherboard component. The illustration below shows the location of the onboard power-on switch. ROG Crosshair V Formula 2-17
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 48
    2.2.7 Jumpers 1. Clear RTC RAM (3-pin CLRTC) This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in CMOS, which include
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 49
    RAID set, refer to section 4.4 RAID configurations or the manual bundled in the motherboard support DVD. • You must install Windows® XP Service Pack 2 or later versions before using Serial ATA hard the BIOS to [AHCI]. See section 3.5.3 Storage Configuration for details. ROG Crosshair V Formula 2-19
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 50
    to these connectors, then install the modules to slots opening at the back of the system chassis. This USB connectors comply with USB 2.0 specification that supports up to 480 Mbps connection speed. 2-20 Chapter 2: Hardware information
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 51
    You can connect the USB 2.0 cable to ASUS Q-Connector (USB, blue) first, and then install the Q-Connector (USB) to the USB 2.0 connector onboard. 4. USB 3.0 connectors chassis. Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard! ROG Crosshair V Formula 2-21
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 52
    connectors support cooling fans of 350 mA-2000 mA (24 W max.) or a total of 1 A-7 A (84 W max.) at +12V. Connect the fan cables to the fan connectors on the motherboard, air flow inside the system may damage the motherboard components. These are not jumpers! DO NOT place jumper caps on the fan
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 53
    , then install the module to a slot opening at the back of the system chassis. The S/PDIF module and the thermal sensor cable are purchased separately. ROG Crosshair V Formula 2-23
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 54
    AAFP) This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC`97 audio standard. Connect one end of the front module to this connector to avail of the motherboard's high-definition audio capability. I�f �y�o�u��w��a�n�t��t�o��c�o�n�n�e��c�t
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 55
    pin EZ_PLUG power plugs to ensure sufficient power supply when you install multiple graphics cards. • Use of a PSU with a higher power output is recommended when Calculator at http://support.asus.com/PowerSupplyCalculator/PSCalculator. aspx?SLanguage=en-us for details. ROG Crosshair V Formula 2-25
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 56
    10. System panel connector (20-8 pin PANEL) This connector supports several chassis-mounted functions. • System power LED (2-pin PLED) This 2-pin connector is for the system power LED. Connect the chassis power LED cable to
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 57
    POWER SW RESET SW 2. Install the ASUS Q-Connector to the system panel connector, ensuring the orientation matches the labels on the motherboard. 3. The front panel functions are now enabled. The figure shows the QConnector is properly installed on the motherboard. ROG Crosshair V Formula 2-27
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 58
    2.2.9 Onboard switches Onboard switches allow you to fine-tune performance when working on a bare or open-case system. This is ideal for overclockers and gamers who continually change settings to enhance system performance. 1. Power-on switch Press the power-on switch to wake/power up the system. 2.
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 59
    3. GO button Press the GO button before POST to enable MemOK! or press it to quickly load the preset profile (GO_Button file) for temporary overclocking when in OS. 4. ROG Connect switch Use the ROG Connect switch to enable/disable the ROG Connect fuctions. ROG Crosshair V Formula 2-29
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 60
    5. CPU Level Up switch Use the CPU Level Up switch to overclock immediately with OC profile presets in Windows environment without the hassle of entering BIOS. 2-30 Chapter 2: Hardware information
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 61
    to the motherboard as shown on Figure 1, or use the ProbeIt cable to connect to the motherboard as shown on Figure 2. Figure 1 Figure 2 The photos above are for reference only, the actual motherboard layout and measure points location may differ by models. ROG Crosshair V Formula 2-31
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 62
    PC chassis Power supply unit AMD AM3+/AM3 CPU AMD AM3+ compatible CPU Fan DIMM SATA hard disk drive SATA optical disc drive (optional) Graphics card The tools and components in the table above are not included in the motherboard package. 2-32 Chapter 2: Hardware information
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 63
    in only one correct orientation. DO NOT force the CPU into the socket to prevent bending the connectors on the socket and damaging the CPU! 1 2 ROG Crosshair V Formula 2-33
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 64
    3 2.3.3 CPU heatsink and fan assembly installation Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan if necessary. 2-34 Chapter 2: Hardware information
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 65
    2.3.3 To install the CPU heatsink and fan assembly 1 2 ROG Crosshair V Formula 2-35
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 66
    3 4 5 2-36 Chapter 2: Hardware information
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 67
    2.3.4 1 DIMM installation 2 3 To remove a DIMM B A ROG Crosshair V Formula 2-37
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 68
    2.3.5 1 Motherboard installation The diagrams in this section are for reference only. The motherboard layout may vary with models, but the installation steps remain the same. 2 2-38 Chapter 2: Hardware information
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 69
    3 DO NOT overtighten the screws! Doing so can damage the motherboard. ROG Crosshair V Formula 2-39
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 70
    2.3.6 1 ATX Power connection 2 OR OR 2-40 Chapter 2: Hardware information
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 71
    2.3.7 1 SATA device connection OR 2 OR ROG Crosshair V Formula 2-41
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 72
    2.3.8 Front I/O Connector To install ASUS Q-Connector 1 2 IDE_LED+ IDE_LED- IDE_LED PWR Ground Reset Ground POWER SW RESET SW To install USB Connector To install front panel audio connector AAFP USB 2-42 Chapter 2: Hardware information
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 73
    2.3.9 Expension Card installation To install PCIe x16 cards To install PCIe x1 cards To install PCI cards ROG Crosshair V Formula 2-43
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 74
    games, a maximum game performance and less lag problems. Installing ThunderBolt 1. Locate the most suitable PCIe x1 or PCIe x16 slot for the ThunderBolt. You can either install ThunderBolt to the PCIe x1 slot or the PCIe x16 slot. 2. Align the card connector with the slot and press firmly until the
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 75
    connector to the ThunderBolt. • Ensure to connect the AAFP cable from the chassis front panel to the ThunderBolt AAFP connector. • Install the ThunderBolt on the PCIE x16/x8 slot for a better LAN performance. • ROG ThunderBolt is only available on selected model. ROG Crosshair V Formula 2-45
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 76
    2 6. Clear CMOS switch 7. External SATA port 8. Optical S/PDIF Out port 9. USB 2.0 ports 3 and 4 10. USB 2.0 ports 5, 6, 7 and 8 (1 port can be switched to ROG Connect) 11. Audio ports To use hot-plug, set the Controller Mode in the BIOS settings to [AHCI] mode. See section 3.5.6 Onboard Devices
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 77
    Rear Speaker Out - Line In Front Speaker Out Mic In Center/Subwoofer Rear Speaker Out Side Speaker Out Audio I/O ports Connect to Headphone and Mic ROG Crosshair V Formula 2-47
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 78
    Connect to Stereo / 2.1-channel Speakers Connect to 4.1-channel Speakers Connect to 5.1-channel Speakers 2-48 Chapter 2: Hardware information
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 79
    Connect to 7.1-channel Speakers ROG Crosshair V Formula 2-49
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 80
    continuous beep followed by four short beeps Hardware component failure 7. At power on, hold down the key to enter the BIOS Setup. Follow the instructions in Chapter 3. 2-50 Chapter 2: Hardware information
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 81
    the BIOS setting. Pressing the power switch for more than four seconds lets the system enter the soft-off mode regardless of the BIOS setting. ROG Crosshair V Formula 2-51
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 82
    2-52 Chapter 2: Hardware information
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 83
    This chapter tells how to change the BIOS se3tup system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided.
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 84
    Chapter summary 3 3.1 Knowing BIOS 3-1 3.2 BIOS setup program 3-1 3.3 Extreme Tweaker menu 3-5 3.4...M.a.i.n�.m�.e�.n�.u 3-12 3.5 Advanced menu 3-15 3.6 Monitor menu 3-29 3.7 Boot menu 3-33 3.8 Tools menu 3-35 3.9 Exit menu 3-38 3.10 Updating BIOS 3-39 ASUS Crosshair V Formula
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 85
    change the BIOS settings only with the help of a trained service personnel. 3.2 BIOS setup program A BIOS setup program is changing any BIOS setting, try to clear the CMOS and reset the motherboard to the default value. See section 2.3.11 Rear panel connectors for ROG Crosshair V Formula 3-1
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 86
    Clicks to display all fan speeds if available Displays the CPU/motherboard temperature, CPU/5V/3.3V/12V voltage output, CPU/chassis/power fan the right hand side Power Saving mode Loads optimized default Normal mode ASUS Optimal mode • The boot device options vary depending on the devices
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 87
    following sections for the detailed configurations. To access the EZ Mode, click Exit, then select ASUS EZ Mode. Menu items Menu bar Configuration fields General help Submenu item Pop-up window Scroll For selecting the exit options and loading default settings ROG Crosshair V Formula 3-3
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 88
    Menu items The highlighted item on the menu bar displays the specific items for that menu. For example, selecting Main shows the Main menu items. The other items (Extreme Tweaker, Advanced, Monitor, Boot, Tool, and Exit) on the menu bar have their respective menu items. Back button This button
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 89
    values can cause the system to malfunction. The configuration options for this section vary depending on the CPU and DIMM model you installed on the motherboard. Scroll down to display the following items: ROG Crosshair V Formula 3-5
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 90
    [CANCEL] OC Tuner automatically overclocks the frequency and voltage of CPU and DRAM. Configuration options: [CANCEL] [OK] CPU Ratio [Auto] Allows you to manually adjust the maximum non-CPB CPU ratio. Use and keys to adjust the value. The valid value ranges vary according to your CPU model
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 91
    ] [1x] [1.25x] [1.5x] Data drive strength [Auto] Configuration options: [Auto] [0.75x] [1x] [1.25x] [1.5x] DQS drive strength [Auto] Configuration options: [Auto] [0.75x] [1x] [1.25x] [1.5x] ROG Crosshair V Formula 3-7
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 92
    ] [240 ohms +/- 20%] [120 ohms +/- 20%] [60 ohms +/- 20%] GPU.DIMM Post The sub-items in this menu display the status of the installed VGA cards and memory. The field shows N/A if there's no device installed on that slot. DIGI + VRM/Power Control CPU Load-line Calibration [Auto] Load-line is
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 93
    loading. [Optimized] Loads the ASUS optimized phase tuning profile. [Extreme] Proceeds the full phase mode. [Manual Adjustment] Allows manual adjustment VRM Over Temperature Protection Maintains the VRM thermal balance. [Extreme] Maintains the VRM current balance. ROG Crosshair V Formula 3-9
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 94
    ] Allows you to set a fixed CPU voltage. [Offset Mode] Allows you to set the Offset voltage. CPU Manual Voltage [Auto] This item appears only when you set the CPU & NB Voltage item to [Manual Mode] and allows you to set a fixed CPU voltage. The values range depends on your CPU. CPU/NB
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 95
    NB 1.8V voltage frequency. Configuration options: [Auto] [1] [2x] VDD PCIE Switching Frequency [Auto] Allows you to switch VDD PCIE voltage frequency. Configuration options: [Auto] [1] [2x ROG Crosshair V Formula 3-11
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 96
    3.4 Main menu The Main menu screen appears when you enter the Advanced Mode of the BIOS Setup program. The Main menu provides you an overview of the basic system information, and allows you to set the system date, time, language, and security settings. 3.4.1 System Language [English] Allows you to
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 97
    : 1. Select the Administrator Password item and press . 2. From the Create New Password box, key in a password, then press . 3. Confirm the password when prompted. ROG Crosshair V Formula 3-13
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 98
    To change an administrator password: 1. Select the Administrator Password item and press . 2. From the Enter Current Password box, key in the current password, then press . 3. From the Create New Password box, key in a new password, then press . 4. Confirm the password when
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 99
    3.5 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. Be cautious when changing the settings of the Advanced menu items. Incorrect field values can cause the system to malfunction. ROG Crosshair V Formula 3-15
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 100
    . Cool'n'Quiet [Disabled] [Enabled] Enables the AMD Cool'n'Quiet function. [Disabled] Disables this function. C1E [Disabled] [Enabled] Enables the C1E support function. This item should be enabled in order to enable the Enhanced Halt Sate. [Disabled] Disables this function. SVM [Enabled
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 101
    . Initiate Graphic Adapter [PEG/PCI] Allows you to decide which graphics controller to use as the primary boot device. Configuration options: [PCI/PEG] [PEG/PCI] ROG Crosshair V Formula 3-17
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 102
    3.5.3 SATA Configuration While entering Setup, the BIOS automatically detects the presence of SATA devices. The SATA Port items show Not Present if no SATA device is installed to the corresponding SATA port. Onchip SATA Channel [Enabled] Configuration options: [Disabled] [Disabled] SATA Port1-
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 103
    : [Disabled] [Enabled] SATA Hot Plug on PORT1-6 [Disabled] Allows you to set SATA Hot Plug on PORT1-6 to external SATA port. Configuration options: [Disabled] [Enabled] ROG Crosshair V Formula 3-19
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 104
    If detected, the USB controller legacy mode is enabled. If no USB device is detected, the legacy USB support is disabled. Legacy USB3.0 Support [Enabled] [Enabled] Enables the support for USB 3.0 devices on legacy operating systems (OS). [Disabled] Disables the function. EHCI Hand-off [Disabled
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 105
    : [Disabled] [Enabled] USB Device Wakeup From S3 or S4 [Enabled] Enable or disable USB Device Wakeup From S3 or S4 funtion. Configuration options: [Disabled] [Enabled] ROG Crosshair V Formula 3-21
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 106
    Core Unlocker [Disabled] Allows you to enable ASUS Core Unlocker to get full computing power of processor.Configuration options: [Disabled] [Enabled] System might become unstable due to different CPU margins. CPU Core Activation [Auto] Allows you to manually turn off the second or the third core
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 107
    the OptionRom of the ASM1061 storage controller. Configuration options: [Enabled] [Disabled] Asmedia USB 3.0 Controller [Enabled] [Enabled] Enables the Asmedia USB 3.0 Controller. [Disabled] Disables the controller. ROG Crosshair V Formula 3-23
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 108
    ] [Disabled] Enables the Asmedia USB 3.0 Battery Charging Support fuction. Disables the fuction. Intel 82583 LAN [Enabled] or high-definition audio depending on the audio standard that the front panel audio module supports. [AC97] [HD] Sets the front panel audio connector (AAFP) mode to legacy
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 109
    generate a wake event. [Enabled] When set to [Enabled], the items RTC Alarm Date (Days) and Hour/Minute/Second will become user-configurable with set values. ROG Crosshair V Formula 3-25
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 110
    to set the iROG Time Keeper operation mode. Configuration options: [Last State] [Disabled] [Enabled] 3.5.9 ROG Connect ROG Connect [Enabled] Allows you to enable or disable the ROG Connect function. Configuration options: [Enabled] [Disabled] RC Poster Mode [String] RC Poster describes what occurs
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 111
    items appear only when you set All LED Control to [Enabled]. ROG Logo [Enabled] Allows you to enable or disable the onboard ROG logo LED. Configuration options: [Enabled] [Disabled] Voltiminder LED [ CPU VDDA [CPU VDDA]. Configuration options: [CPU] [CPU/NB] [CPU VDDA] ROG Crosshair V Formula 3-27
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 112
    NB LED Selection [NB] Allows you to switch the onboard NB LED display between NB voltage [NB], NB 1.8V [NB 1.8V], and VDDPCIE voltage [VDDPCIE]. Configuration options: [NB] [NB 1.8V] [VDDPCIE] SB LED Selection [SB] Allows you to switch the onboard SB LED display between SB voltage [NB] and HT
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 113
    Temperature[xxxºC/xxxºF] The onboard hardware monitor automatically detects and displays the CPU, motherboard, and the assigned devices temperatures. Select [Ignored] if you do not wish to it from damage. Configuration options: [Disabled] [70ºC] [80ºC] [90ºC] [100ºC] ROG Crosshair V Formula 3-29
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 114
    per minute (RPM). If any of the fans is not connected to the motherboard, the field shows [N/A]. These items are not user‑configurable. Fan Speed to achieve maximum CPU fan speed. [Manual] S ets to [Manual] to display more items for you to manually adjust the CPU upper/lower temperature, and
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 115
    chassis fan operation. [Turbo] Sets to [Turbo] to achieve maximum chassis fan speed. [Manual] Sets to [Manual] to assign detailed fan speed control parameters. The following four items appear only when you set the chassis fan will operate at the maximum duty cycle. ROG Crosshair V Formula 3-31
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 116
    Chassis Fan Min. Duty Cycle(%) [60] Use the and keys to adjust the minimum chassis fan duty cycle. The values range from 60% to 100%. When the chassis temperature is under 40ºC, the chassis fan will operate at the minimum duty cycle. Chassis Fan Speed Low Limit [600 RPM] This item appears
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 117
    3.7 Boot menu The Boot menu items allow you to change the system boot options. ROG Crosshair V Formula 3-33
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 118
    ] Enables the full screen logo display feature. [Disabled] Disables the full screen logo display feature. Set this item to [Enabled] to use the ASUS MyLogo 3™ feature. Option ROM Messages [Force BIOS] [Force BIOS] The third-party ROM messages will be forced to display during the boot sequence
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 119
    the submenu. 3.8.1 ASUS EZ Flash 2 Utility Allows you to run ASUS EZ Flash 2 Utility. When you press to start the application. For more details, refer to section 3.10.2 ASUS EZ Flash 2 Utility. 3.8.2 ASUS SPD Information Allows you to get DRAM SPD information. ROG Crosshair V Formula 3-35
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 120
    3.8.3 ASUS O.C. Profile This item allows you to store or load multiple BIOS settings. Add Your CMOS Profile Allows you to save the current BIOS file to
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 121
    . Load Default Allows you to load default settings. Save Above Settings Allows you to save the adjusted values for specific items as a GO Button file. ROG Crosshair V Formula 3-37
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 122
    without saving your changes. When you select this option or if you press , a confirmation window appears. Select Yes to discard changes and exit�. ASUS EZ Mode This option allows you to enter the EZ Mode screen. Launch EFI Shell from filesystem device This option allows you to attempt to
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 123
    to the corresponding sections for details on these utilities. Save a copy of the original motherboard BIOS file to a USB flash disk in case you need to restore the BIOS in the future. Copy the original motherboard BIOS using the ASUS Update or BIOS Updater utilities. ROG Crosshair V Formula 3-39
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 124
    requires an Internet connection either through a network or an Internet Service Provider (ISP). Launching ASUS Update After installing AI Suite II from the motherboard support DVD, launch ASUS Update by clicking Update > ASUS Update on the AI Suite II main menu bar. Quit all Windows® applications
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 125
    No to continue. 5. Click Browse to locate your desired picture file. 6. Adjust the picture resolution if needed and click Next to continue. 7. Follow the onscreen instructions to complete the update process. ROG Crosshair V Formula 3-41
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 126
    No to continue. 4. Follow the onscreen instructions to complete the update process. • The screenshots in this section are for reference only. The actual BIOS information vary by models. • Refer to the software manual in the support DVD or visit the ASUS website at www.asus.com for detailed software
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 127
    or an OS‑based utility. Before you start using this utility, download the latest BIOS from the ASUS website at www.asus.com. To update the BIOS using EZ Flash 2 Utility: 1. Insert the USB flash disk that update process. Reboot the system when the update process is done. ROG Crosshair V Formula 3-43
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 128
    • This function can support devices such as a USB flash disk with FAT 32/16 format and single partition only. • DO NOT shut down or reset the system while updating
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 129
    same as shown. Before updating BIOS 1. Prepare the motherboard support DVD and a USB flash drive in FAT32/16 format Updater from the ASUS website at http://support.asus.com and save them on the USB flash drive. • NTFS is not supported under DOS environment )! C:\>d: D:\> ROG Crosshair V Formula 3-45
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 130
    backup is done, press any key to return to the DOS prompt. ASUSTek BIOS Updater for DOS V1.18 [2011/04/08] Current ROM BOARD: Crosshair V Formula VER: 0239 DATE: 08/04/2011 Update ROM BOARD: Unknown VER: Unknown DATE: Unknown PATH: A:\ BIOS backup is done! Press any key to continue. Note
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 131
    system compatibility and stability. Select the Load Optimized Defaults item under the Exit BIOS menu. See Chaper 3 of your motherboard user manual for details. • Ensure to connect all SATA hard disk drives after updating the BIOS file if you have disconnected them. ROG Crosshair V Formula 3-47
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 132
    3-48 Chapter 3: BIOS setup
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 133
    This chapter describes the contents of the support DVD that comes with the motherboard package and the software. 4 Software support
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 134
    Chapter summary 4 4.1 Installing an operating system 4-1 4.2 Support DVD information 4-1 4.3 Software information 4-8 4.4 RAID configurations 4-38 4.5 Creating a RAID driver disk 4-43 ROG Crosshair V Extreme
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 135
    . Click an icon to display support DVD/motherboard information Click an item to install If Autorun is NOT enabled in your computer, browse the contents of the support DVD to locate the file ASSETUP.EXE from the BIN folder. Double-click the ASSETUP.EXE to run the DVD. ROG Crosshair V Formula 4-1
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 136
    the browser configuration utility. USB 3.0 Driver Installs the USB 3.0 driver. Asmedia SATA Controller Driver Installs the Asmedia SATA Controller driver. The ASUS ROG THUNDERBOLT Audio/LAN Drivers appear only when ROG ThunderBolt has been installed in the system. 4-2 Chapter 4: Software support
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 137
    motherboard supports. ASUS AI Suite II Installs the ASUS AI Suite II. ASUS ROG Connect Installs the ASUS ROG Connect utility. ASUS ROG Connect Plus Installs the ASUS ROG Connect Plus utility. ASUS ROG GameFirst Installs the ASUS ROG online help for detailed information. ROG Crosshair V Formula 4-3
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 138
    menu contains a list of supplementary user manuals. Click an item to open the folder of the user manual. Most user manual files are in Portable Document Format (PDF). Install the Adobe® Acrobat® Reader from the Utilities menu before opening a user manual file. 4-4 Chapter 4: Software support
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 139
    4.2.6 Video menu Click the Video tab to display a list of video clips. Click the video titles to watch ROG users' outstanding performances with ROG motherboards. 4.2.7 ASUS Contact information Click the Contact tab to display the ASUS contact information. ROG Crosshair V Formula 4-5
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 140
    screen give additional information on the motherboard and the contents of the support DVD. Click an icon to display the specified information. Motherboard Info Displays the general specifications of the motherboard. Browse this DVD Displays the support DVD contents in graphical format. 4-6 Chapter
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 141
    Filelist Displays the contents of the support DVD and a brief description of each in text format. ROG Crosshair V Formula 4-7
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 142
    Software information Most of the applications in the support DVD have wizards that will conveniently guide you through the installation. View the online help or readme file that came with the software application for more information. 4.3.1 ASUS AI Suite II ASUS AI Suite II allows you to launch
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 143
    motherboard support DVD, launch TurboV EVO by clicking Tool > TurboV EVO on the AI Suite II main menu bar. Refer to the software manual in the support DVD or visit the ASUS website at www.asus.com for detailed software configuration. Manual Mode Manual in More Settings. ROG Crosshair V Formula 4-9
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 144
    Click to restore all start-up settings Voltage Adjustment bars Undoes all changes without applying Applies all changes immediately CPU Ratio Allows you to manually adjust the CPU ratio. 1. Click More Settings, and then click the CPU Ratio tab. 2. Drag the adjustment bar upwards or downwards to the
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 145
    [Auto] before using the CPU Ratio function in TurboV. Refer to Chapter 3 of your motherboard user manual for details. • The CPU Ratio bars show the status of the CPU cores, which vary with your through the warning messages and click OK to start auto-overclocking. ROG Crosshair V Formula 4-11
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 146
    memory and restarts the system. After re-entering Windows, a message appears indicating the current overclocking result. To keep the result, click Stop. 4-12 Chapter 4: Software support
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 147
    . 5. TurboV automatically adjusts and saves BIOS settings and restarts the system. After re-entering Windows, a message appears indicating auto tuning success. Click OK to exit. ROG Crosshair V Formula 4-13
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 148
    + VRM ASUS DIGI+ VRM allows you to adjust VRM voltage and frequency modulation to enhance reliability and stability. It also provides the highest power efficiency, generating less heat to longer component lifespan and minimize power loss. After installing AI Suite II from the motherboard support DVD
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 149
    when overclocking or under high CPU loading for extra power support. CPU Voltage Frequency Switching frequency will affect the VRM • Manual Frequency Step: 10kHz Do not remove the thermal module when switching to Manual mode. The thermal conditions should be monitored. ROG Crosshair V Formula 4-15
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 150
    a wider total power range and extends the overclocking frequency range simultaneously. Suggestion: choose higher value when overclocking or under high CPU loading for extra power support. 4-16 Chapter 4: Software
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 151
    Standard: Phase control based on CPU command. • Optimized: ASUS optimized phase tuning profile • Extreme: Full phase mode • Manual Adjustment: Phase number adjusted by current (A) step • Do not remove the thermal module. The thermal conditions should be monitored. ROG Crosshair V Formula 4-17
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 152
    , and Fan Control. Launching EPU After installing AI Suite II from the motherboard support DVD, launch EPU by clicking Tool > EPU on the AI Suite II • Refer to the software manual in the support DVD or visit the ASUS website at www.asus.com for detailed software configuration. 4-18 Chapter
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 153
    achieve a quiet and cool system environment. Launching FAN Xpert After installing AI Suite II from the motherboard support DVD, launch FAN Xpert by clicking Tool > Fan Xpert on the AI Suite II main Allows you to configure the CPU fan profile under certain limitations. ROG Crosshair V Formula 4-19
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 154
    the computer's vital components, and detects and alerts you of any problem with these components. Probe II senses fan rotations, CPU temperature, and operating condition. Launching Probe II After installing AI Suite II from the motherboard support DVD, launch PC Probe II by clicking Tool > Probe II
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 155
    Setting preference Click Preference on the top to customize Probe II, including detection cycle, and temperature display unit. Checking Alert Log Click Alert Log on the top to check the log. Click Clear to reset the log if needed. ROG Crosshair V Formula 4-21
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 156
    in the system voltage, temperature, and fan speed, as well as recording the changes. Launching Sensor Recorder After installing AI Suite II from the motherboard support DVD, click Tool > Sensor Recorder on the AI Suite II main menu bar to launch PC Probe II. Configuring Sensor Recorder Click the
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 157
    tab displays the status of the CPU and motherboard temperatures. Select the items that you want to monitor. Fan Speed The Fan Speed tab displays the status of the rotations (per minute) of the CPU, chassis, and power fans. Select the items that you want to monitor. ROG Crosshair V Formula 4-23
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 158
    a certain recorded history. • If you want to delete a recorded history, click beside the date of the selected recorded history to clear it. 4-24 Chapter 4: Software support
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 159
    Connect the provided ROG Connect cable to the local PC and the remote PC. 2. Press the ROG Connect Button. 3. Double-click the RC TweakIt shortcut on the remote PC to activate the function Using RC TweakIt Use the sliders and buttons to monitor or adjust your local PC. ROG Crosshair V Formula 4-25
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 160
    the POST. You can switch the display mode between String and Code. RC Remote RC Remote allows you to operate your local system through the ROG Connect cable. RC Diagram RC Diagram allows you to monitor and record your local system status. 4-26 Chapter 4: Software
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 161
    GPU TweakIt GPU TweakIt allows you to control and monitor the installed GPU on the local system. Use the sliders to adjust the values and click Apply to save your customized settings. ROG Crosshair V Formula 4-27
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 162
    connected to the internet and click Start to perform the bandwidth test. Network Click the Network tab on the left to configure your network settings. ROG ThunderBolt is only available on selected model. 4-28 Chapter 4: Software
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 163
    control, and other configurations. Overviews Click the Overview tab on the left to see the system information and the current status of the network connection. ROG Crosshair V Formula 4-29
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 164
    network usage of the applications, you have to enable the application control first. Click the Advanced tab and enable the Application Control. 4-30 Chapter 4: Software support
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 165
    to avoid large volume fluctuations. • DS3D GX: Enable DirectSound3D Game Extensions to support EAX and DirectSound3D extensions for EAX and DS3D games on Windows. • If you as your default audio output device. ROG ThunderBolt is only available on selected model. ROG Crosshair V Formula 4-31
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 166
    to the game you play. Add or Delete a profile FPS Mode (First Person Shooter mode) HiFi Mode Racing Mode RTS Mode (Real-Time Strategy mode) Manual (You customized mode) Switches the display panel 4-32 Chapter 4: Software
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 167
    tuning setting may damage your headphone. Select a proper gain according to your headphone specification. Only audio output from the front panel via the AAFP cable supports the headphone gain tuning function. ROG Crosshair V Formula 4-33
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 168
    corresponding box to select from Mic and Line-In for the input device. Click each button directly to configure the related settings. 4-34 Chapter 4: Software support
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 169
    -click Activate on the desktop. Ensure that you have successfully installed the LAN driver and have connected to the Internet. 2. Click Activate to start activation. ROG Crosshair V Formula 4-35
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 170
    audio extensions (EAX) After enabling the EAX effects, you are allowed to select and add your desired environment sounds into the music. 4-36 Chapter 4: Software support
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 171
    later use. Mixer You can manually adjust the audio volumes, including Line In, Stereo Mix and Microphone, when recording or during the playback. THX THX is a high-fidelity sound technology that allows you to adjust the surround sound effect, sub-woofer volume, etc.. ROG Crosshair V Formula 4-37
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 172
    chipset that allows you to configure Serial ATA hard disk drives as RAID sets. The motherboard supports the following RAID configurations: RAID 0, RAID 1, RAID 5 and RAID 10. • You must install Windows® XP Service Pack 2 or later versions before using Serial ATA hard disk drives. The Serial ATA RAID
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 173
    4.4.2 Installing Serial ATA hard disks The motherboard supports Serial ATA hard disk drives. For optimal performance, install identical drives of the same model and , you can set the SATA ports 5 and 6 to [IDE] mode. See section 3.5.4 SATA Configuration for details. ROG Crosshair V Formula 4-39
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 174
    screen. To create a RAID volume using more than four hard disk drives, ensure that the SATA connectors 5/6 are set to [RAID] mode. 4-40 Chapter 4: Software support
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 175
    key to ignore this option> 9. Press + to enter the screen to modify the array capacity, or press any key to use the maximum capacity. ROG Crosshair V Formula 4-41
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 176
    :ID 01:00 02:00 Drive Model xxxxxxxxx xxxxxxxxx [ Drives Assignments ] Capabilities Capacity(GB) xxxxxxx xxxxxx xxxxxxx xxxxxx 4-42 Any Key To Continue....... Chapter 4: Software support
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 177
    , use either a USB flash drive with the RAID driver or the support DVD. • The motherboard does not provide a floppy drive connector. You have to use a screen instructions to complete the process. Write-protect the floppy disk to avoid a computer virus infection. ROG Crosshair V Formula 4-43
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 178
    driver for the corresponding OS version. 4. Follow the succeeding screen instructions to complete the installation. To install the RAID driver for Windows Insert the USB flash drive with RAID driver into the USB port or the support DVD into the optical drive, and then click Browse. 3. Click the name
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 179
    driver disk to locate the file txtsetup.oem. 6. Double-click the file. A window appears, allowing you to select the program for opening the oem file. ROG Crosshair V Formula 4-45
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 180
    = "PCI\VEN_1002&DEV_4392&CC_0104","ahcix64" id= "PCI\VEN_1002&DEV_4391&CC_0106","ahcix64" id= "PCI\VEN_1002&DEV_4393&CC_0104","ahcix64" id= "USB\VID_03EE&PID_6901", "usbstor" 4-46 Chapter 4: Software support
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 181
    Multiple 5GPU This chapter describes how to install and configure multiple ATI® CrossFireX™ and NVIDIA® SLI™ graphics cards. technology support
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 182
    Chapter summary 5 5.1 ATI® CrossFireX™ technology 5-1 5.2 NVIDIA® SLI™ technology 5-5 ROG Crosshair V Formula
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 183
    , go to Control Panel > Programs and Features. For Windows 7, go to Control Panel > Programs > Uninstall a program. 3. Select your current graphics card driver/s. 4. For Windows XP, select Add/Remove. For Windows Vista and 7, select Uninstall. 5. Turn off your computer. ROG Crosshair V Formula 5-1
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 184
    are for reference only. The graphics cards and the motherboard layout may vary with models, but the installation steps remain the same. 1. Prepare two CrossFireX-ready graphics cards. 2. Insert the two graphics card into the PCIEX16 slots. 3. Ensure that the cards are properly seated on the slots
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 185
    came with your graphics card package to install the device drivers. Ensure that your PCI Express graphics card driver supports the ATI® CrossFireX™ technology the existance of multigraphics cards. Click Go to continue to the Catalyst Control Center Advanced View window. ROG Crosshair V Formula 5-3
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 186
    settings 1. In the Catalyst Control Center window, click Graphics Settings > CrossFireX > Configure. 2. From the Graphics Adapter list, select the graphics card to act as the display GPU. 3. Select Enable CrossFireX. 1 4. Click Apply, and then click OK to exit the window. 2 3 4 5-4 Chapter
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 187
    card into the PCIEX16 slots. If your motherboard has more than two PCIEX16 slots, refer to Chapter 2 in this user manual for the locations of the PCIEX16 slots recommended for multi-graphics card installation. 3. Ensure that the cards are properly seated on the slots. ROG Crosshair V Formula
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 188
    Goldfingers 5.2.3 Installing the device drivers Refer to the documentation that came with your graphics card package to install the device drivers. Ensure that your PCI Express graphics card driver supports the NVIDIA® SLI™ technology. Download the latest driver from the NVIDIA website (www.nvidia
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 189
    B1. If you cannot see the NVIDIA Control Panel item in step (A), select Personalize. B2. From the Personalization window, select Display Settings. B3. From the Display Settings dialog box, click Advanced Settings. ROG Crosshair V Formula 5-7
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 190
    window, select Set SLI Configuration. Click Enable SLI and set the display for viewing SLI rendered content. When done, click Apply. 5-8 Chapter 5: Multiple GPU technology support
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 191
    CA 94539, USA Telephone +1-812-282-3777 Fax +1-510-608-4555 Web site usa.asus.com Technical Support Telephone Support fax Online support +1-812-282-2787 +1-812-284-0883 support.asus.com ASUS COMPUTER GmbH (Germany and Austria) Address Harkort Str. 21-23, D-40880 Ratingen, Germany
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 192
    Country: TAIWAN Authorized.representative.in.Europe:. ASUS COMPUTER GmbH Address,.City: HARKORT STR. 21-23, 40880 RATINGEN Country:. GERMANY declare.the.following.apparatus:. Product.name.:. Motherboard. Model.name.:. CROSSHAIR.V.FORMULA. conform.with.the.essential.requirements.of.the
  • Asus CROSSHAIR V FORMULA/THUND | User Manual - Page 193
    Country: TAIWAN Authorized.representative.in.Europe:. ASUS COMPUTER GmbH Address,.City: HARKORT STR. 21-23, 40880 RATINGEN Country:. GERMANY declare.the.following.apparatus:. Product.name.:. Network/Sound.Card. Model.name.:. THUNDERBOLT. conform.with.the.essential.requirements.of.the
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
Motherboard
Crosshair V
Formula Series