Asus DSL-AC52U users manual in English

Asus DSL-AC52U Manual

Get Asus DSL-AC52U PDF manuals and user guides View all Asus DSL-AC52U manuals
Add to My Manuals
Save this manual to your list of manuals

Asus DSL-AC52U manual content summary:

  • Asus DSL-AC52U | users manual in English - Page 1
    User Guide DSL-AC52U Wireless-AC1200 Dual-band 802.11ac VDSL/ADSL Modem Router Wi-Fi ADSL / VDSDLuaMl oBdaenmd 8R0o2u.1te1rac
  • Asus DSL-AC52U | users manual in English - Page 2
    "). Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. ASUS PROVIDES THIS MANUAL "AS IS"WITHOUT WARRANTY
  • Asus DSL-AC52U | users manual in English - Page 3
    1.4 Positioning your xDSL modem router 9 1.5 Setup Requirements 10 1.6 xDSL Modem Router Setup 11 1.6.1 Wired connection 11 1.6.2 Wireless connection Using the Traffic Manager 27 3.3.1 Managing QoS (Quality of Service) Bandwidth..........27 3.3.2 Monitoring Traffic 30 3.3.3 Spectrum 31 3.4
  • Asus DSL-AC52U | users manual in English - Page 4
    Table of contents 3.6 Using AiCloud 40 3.6.1 Cloud Disk 41 3.6.2 Smart Access 43 3.6.3 Smart Sync 44 4 Configuring the Advanced Settings 4.1 Wireless 45 4.1.1 General 45 4.1.2 WPS 48 4.1.3 Bridge 50 4.1.4 Wireless MAC Filter 52 4.1.5 RADIUS Setting 53 4.1.6 Professional 54 4.2 LAN 56
  • Asus DSL-AC52U | users manual in English - Page 5
    Discovery 86 5.2 Firmware Restoration 87 5.3 Setting up your printer server 88 5.3.1 ASUS EZ Printer Sharing 88 5.3.2 Using LPR to Share Printer 92 5.4 Download Master 97 5.4.1 Configuring Bit Torrent download settings 98 5.4.2 NZB settings 99 6 Troubleshooting 6.1 Basic Troubleshooting 100
  • Asus DSL-AC52U | users manual in English - Page 6
    region) Power adapter Quick Start Guide DSL/phone cable (RJ-11 cable) Warranty card NOTES: • If any of the items are damaged or missing, contact ASUS for technical inquiries and support. Refer to the ASUS Support Hotline list at the back of this user manual. • Keep the original packaging material
  • Asus DSL-AC52U | users manual in English - Page 7
    : No power. On: Device is ready. Flashing slow: Rescue mode Flashing quick: WPS is processing. DSL LED Off: No DSL link or unable to establish DSL link. On: DSL link is established. Flashing: DSL is attempting to connect to a DSLAM. Ethernet WAN LED Off: No power or no physical connection. On: Has
  • Asus DSL-AC52U | users manual in English - Page 8
    DSL port Connect to a splitter or to a telephone outlet via an RJ-11 cable. LAN 1 ~ 4 ports Connect network cables into these ports to establish LAN connection. Ethernet WAN Specifications: • Power consumption in off mode: 0.21W • Power consumption in network standby mode: 4.21W • The average power
  • Asus DSL-AC52U | users manual in English - Page 9
    motors, fluorescent lights, microwave ovens, refrigerators, and other industrial equipment. • Always update to the latest firmware. Visit the ASUS website at http://www.asus.com to get the latest firmware updates. • To ensure the best wireless signal, orient the four detachable antennas as shown in
  • Asus DSL-AC52U | users manual in English - Page 10
    computer to connect to the network. • With its dual band technology, your ADSL/VDSL router supports 2.4GHz and 5GHz wireless signals simultaneously. This allows you to browse the Internet or access e-mail messages using the 2.4GHz band while streaming high-definition audio/video files such as movies
  • Asus DSL-AC52U | users manual in English - Page 11
    problems. • Before setting up your ASUS xDSL modem router, do the following: • If you are replacing an existing xDSL modem router, disconnect it from your network. 1.6.1 Wired connection NOTE: You can use either a straight-through cable or a crossover cable for wired connection. DSL E-WAN WPS
  • Asus DSL-AC52U | users manual in English - Page 12
    Wireless connection Computer DSL E-WAN WPS Wi-Fi on/off Wall power outlet Power DSL Phone Splitter DSL port of your splitter. 3. Install an IEEE 802.11a/b/g/n/ac WLAN adapter on your computer. NOTES: • For details on connecting to a wireless network, refer to the WLAN adapter's user manual
  • Asus DSL-AC52U | users manual in English - Page 13
    a web browser such as Internet Explorer, Firefox, Safari, or Google Chrome. NOTE: The features may vary with different firmware versions. To log into the web GUI: 1. On your web browser, manually key in the xDSL modem router's default IP address: 192.168.1.1 2. On the login page, key in the
  • Asus DSL-AC52U | users manual in English - Page 14
    Setup (QIS) function guides you in quickly setting up your Internet connection. NOTE: When setting the Internet connection for the first time, press the Reset button on your xDSL modem router to reset it to its factory default settings. For more details, refer to the section Firmware Restoration
  • Asus DSL-AC52U | users manual in English - Page 15
    DSL Annex mode, Internet connection type, and VPI/VCI value and encapsulation modes. Key in the Internet account information from your Internet Service for DSL setup. If you want to configure DSL-AC52U as a wireless router, refer to the section Internet Connection in Chapter 4 of this user manual. 15
  • Asus DSL-AC52U | users manual in English - Page 16
    QIS failed to detect your Internet connection type, follow the steps below to manually configure your connection settings: a) Select the Annex mode that your DSL service uses. NOTES: • Annex A or Annex B mode has multiple modes: Annex A/I/J/L/M or Annex B/J. If your ISP DSLAM offers both Annex A and
  • Asus DSL-AC52U | users manual in English - Page 17
    b) Select your Country and Internet Service Provider (ISP). c) Assign the wireless network name (SSID) and security key for your wireless connection. Click Apply when done. 17
  • Asus DSL-AC52U | users manual in English - Page 18
    d) A summary page appears to show the current settings for your network. Click Next to save your network settings and go to the Network Map page. 2.3 Connecting to your wireless network After setting up your xDSL modem router via QIS, you can connect your computer or other smart devices to your
  • Asus DSL-AC52U | users manual in English - Page 19
    NOTES: • Refer to the next chapters for more details on configuring your wireless network's settings. • Refer to your device's user manual for more details on connecting it to your wireless network. 3 Configuring the General settings 3.1 Using the Network Map Network Map allows you to configure your
  • Asus DSL-AC52U | users manual in English - Page 20
    3.1.1 Setting up the wireless security settings To protect your wireless network from unauthorized access, you need to configure its security settings. To set up the wireless security settings: 1. From the navigation panel, go to General > Network Map. 2. On the
  • Asus DSL-AC52U | users manual in English - Page 21
    IMPORTANT! The IEEE 802.11n/ac standard prohibits using High Throughput with WEP or WPA-TKIP as the unicast cipher. If you use these encryption methods, your data rate will drop to IEEE 802.11g 54Mbps connection. 5. Key in your WPA-PSK key (security passkey). 6. Click Apply when done. 3.1.2 Managing
  • Asus DSL-AC52U | users manual in English - Page 22
    ASUS DSL-AC52U provides two USB 2.0 ports for connecting USB devices or USB printer to allow you to share files and printer with clients in your network. NOTES: • USB External HDD/Flash disk: • Your xDSL modem router works with most USB HDDs/Flash disks up to 3TB and supports read-write access
  • Asus DSL-AC52U | users manual in English - Page 23
    . • For the list of printers that your xDSL modem router supports, visit http://event.asus.com/networks/printersupport IMPORTANT! You first need to create a share account and its permission /access rights to allow other network clients to access the USB device via an FTP site/third-party FTP client
  • Asus DSL-AC52U | users manual in English - Page 24
    Safely removing the USB disk IMPORTANT: Incorrect removal of the USB disk may cause data corruption. To safely remove the USB disk: 1. From the navigation panel, go to General > Network Map. 2. In the upper right corner, click > Eject USB disk. When the USB disk is ejected successfully, the USB
  • Asus DSL-AC52U | users manual in English - Page 25
    Creating a Guest Network The Guest Network provides temporary visitors with Internet connectivity via access to separate SSIDs or networks without providing access to your private network. NOTE: ASUS DSL-AC52U supports up to four SSIDs (including the main SSID). To create a guest network: 1. From
  • Asus DSL-AC52U | users manual in English - Page 26
    (SSID) that you want to modify. 5. Assign a wireless name for your temporary network on the Network Name (SSID) field. 6. Select an Authentication Method. 7. Specify the Access time or choose Limitless. 8. Select Disable or Enable on the
  • Asus DSL-AC52U | users manual in English - Page 27
    from your ISP. 3. Click Save. NOTE: The User Specify Rule List is for advanced settings. If you want to prioritize specific network applications and network services, select User-defined QoS rules or User-defined Priority from the drop-down list on the upper-right corner. 27
  • Asus DSL-AC52U | users manual in English - Page 28
    column, you can set the network traffic limit (in KB) for a specific service to generate specific priorities for the service assigned to a specific port. For example, if two network clients, PC 1 and PC 2, are both accessing the Internet (set at port 80), but PC 1 exceeds the network traffic limit
  • Asus DSL-AC52U | users manual in English - Page 29
    5. On the User-defined Priority page, you can prioritize the network applications or devices into five levels from the userdefined QoS rules' dropdown list. Based on priority level, you can use the following methods to send data packets: • Change the order of upstream network packets that are sent
  • Asus DSL-AC52U | users manual in English - Page 30
    3.3.2 Monitoring Traffic The traffic monitor function allows you to access the bandwidth usage and speed of your Internet, wired, and wireless networks. It allows you to monitor network traffic even on a daily basis. NOTE: Packets
  • Asus DSL-AC52U | users manual in English - Page 31
    quality. The graph to signal-to-noise ratio shows the classic SNR (Signal-toNoise Ratio), which can be useful in identifying the stability of the DSL connection. Transmission/Reception graph shows how many bits per carrier are transmitted/received. 31
  • Asus DSL-AC52U | users manual in English - Page 32
    3.4 Setting up Parental Control Parental Control allows you to control the Internet access time. Users can set the time limit for a client's network usage. To use the parental control function: 1. From the navigation panel, go to General > Parental
  • Asus DSL-AC52U | users manual in English - Page 33
    modem router. Ensure that the USB storage device is formatted and partitioned properly. Refer to the ASUS website at http://event.asus.com/2009/networks/disksupport/ for the file system support table. 3.5.1 Using AiDisk AiDisk allows you to share files stored on a connected USB device through the
  • Asus DSL-AC52U | users manual in English - Page 34
    rights that you want to assign to the clients accessing your shared data. 4. Create your domain name via the ASUS DDNS services, read the Terms of Service and then select I will use the service and accept the Terms of service and key in your domain name. When done, click Next. You can also select
  • Asus DSL-AC52U | users manual in English - Page 35
    for the USB disk in the Servers Center. Using Media Server Your xDSL modem router allows DLNA-supported devices to access multimedia files from the USB disk connected to your xDSL modem router. NOTE: Before using the DLNA Media Server function, connect your device to the DSL-AC52U's network. 35
  • Asus DSL-AC52U | users manual in English - Page 36
    . • Media Server Status: Displays the status of the media server. Using Network Place (Samba) Share service Network Place (Samba) Share allows you to set up the accounts and permissions for the Samba service. To use Samba share: 1. From the navigation panel, go to General > USB application > Servers
  • Asus DSL-AC52U | users manual in English - Page 37
    2. Follow the steps below to add, delete, or modify an account. To create a new account: a) Click to add new account. b) In the Account and Password fields, key in the name and password of your network client. Retype the password to confirm. Click Add to add the account to the list. To delete an
  • Asus DSL-AC52U | users manual in English - Page 38
    folders: • R/W: Select this option to assign read/write access. • R: Select this option to assign read-only access. • No: Select this option if you do not want to share a specific file folder. 4. Click Apply to apply the changes. Using the FTP Share service FTP share enables an FTP server to share
  • Asus DSL-AC52U | users manual in English - Page 39
    Share service: NOTE: Ensure that you have set up your FTP server through AiDisk. For more details, refer to the section 3.5.1 Using AiDisk. 1. From the navigation panel, click General > USB application > Servers Center > FTP Share tab. 2. From the list of folders, select the type of access rights
  • Asus DSL-AC52U | users manual in English - Page 40
    is a cloud service application that allows you to save, sync, share, and access your files. To use AiCloud: 1. From Google Play Store or Apple Store, download and install the ASUS AiCloud app to your smart device. 2. Connect your smart device to your network. Follow the instructions to complete the
  • Asus DSL-AC52U | users manual in English - Page 41
    3.6.1 Cloud Disk To create a cloud disk: 1. Insert a USB storage device into the xDSL modem router. 2. Turn on Cloud Disk. 3. Go to https://www.asusnetwork.net and enter the router login account and password. For better user experience, we recommend that you use Google Chrome or Firefox. 41
  • Asus DSL-AC52U | users manual in English - Page 42
    4. You can now start accessing Cloud Disk files on devices connected to the network. NOTE: When accessing the devices that are connected to the network, you need to enter the device's user name and password manually, which will not be saved by AiCloud for security reason. 42
  • Asus DSL-AC52U | users manual in English - Page 43
    3.6.2 Smart Access The Smart Access function allows you to easily access your home network via your router's domain name. NOTES: • You can create a domain name for your router with ASUS DDNS. For more details, refer to section 4.3.6 DDNS. • By default, AiCloud provides a secure HTTPS connection. Key
  • Asus DSL-AC52U | users manual in English - Page 44
    3.6.3 Smart Sync To use Smart Sync: 1. Launch AiCloud, click Smart Sync > Go. 2. Select ON to enable Smart Sync. 3. Click Add new account. 4. Enter your ASUS WebStorage account password and select the directory that you want to sync with WebStorage. 5. Click Apply. 44
  • Asus DSL-AC52U | users manual in English - Page 45
    2. Select 2.4GHz or 5GHz as the frequency band for your wireless network. 3. Assign a unique name containing up to 32 characters for your SSID (Service Set Identifier) or network name to identify your wireless network. Wi-Fi devices can identify and connect to the wireless network via your assigned
  • Asus DSL-AC52U | users manual in English - Page 46
    to enter the SSID manually on the wireless device to access the wireless network. 5. Select any of these wireless mode options to determine the allow 802.11b/g/n devices to connect to the xDSL modem router. Hardware that supports 802.11n natively, however, will only run at a maximum speed of 54Mbps
  • Asus DSL-AC52U | users manual in English - Page 47
    . It is with integrated EAP server or an external RADIUS back-end authentication server. NOTE: Your xDSL modem router supports the maximum transmission rate of 54Mbps when the Wireless Mode is set to Auto and encryption method is WEP or TKIP. 9. Select any of these WEP (Wired Equivalent Privacy
  • Asus DSL-AC52U | users manual in English - Page 48
    4.1.2 WPS WPS (Wi-Fi Protected Setup) is a wireless security standard that allows you to easily connect devices to a wireless network. You can configure the WPS function via the PIN code or WPS button. NOTE: Ensure that the devices support WPS. To enable WPS on your wireless network: 1. From the
  • Asus DSL-AC52U | users manual in English - Page 49
    : Check your wireless device or its user manual for the location of the WPS button. will switch to standby mode. 6. To set up WPS using the Client's manual or on the device itself. b.Key in the Client PIN code on the text box. c. Click Start WPS to put your xDSL modem router into WPS survey mode
  • Asus DSL-AC52U | users manual in English - Page 50
    also be considered as a wireless repeater where your ASUS Wireless xDSL Modem Router communicates with another access point and other wireless devices. To set up the wireless bridge: 1. From the navigation panel, go to Advanced Settings > Wireless > Bridge tab. 3. In the AP Mode field, select any of
  • Asus DSL-AC52U | users manual in English - Page 51
    : Enables the Wireless Bridge feature and allows other wireless devices/stations to connect to the router. NOTE: In Hybrid mode, wireless devices connected to the ASUS Wireless xDSL Modem Router will only receive half the connection speed of the Access Point. 4. In the Connect to APs in list field
  • Asus DSL-AC52U | users manual in English - Page 52
    Advanced Settings > Wireless > Wireless MAC Filter tab. 2. Enable the Mac Filter Mode, then in the MAC Filter Mode dropdown list, select either Accept or Reject. • Select Accept to allow devices in the MAC filter list to access to the wireless network. • Select Reject to prevent devices in the MAC
  • Asus DSL-AC52U | users manual in English - Page 53
    Service) Setting provides an extra layer of security when you choose WPAEnterprise, WPA2-Enterprise, or Radius with 802.1x as your Authentication Mode . To set up wireless RADIUS settings: 1. Ensure that the xDSL modem router's authentication mode modem router's Authentication Mode. 2. From the
  • Asus DSL-AC52U | users manual in English - Page 54
    4.1.6 Professional The Professional screen provides advanced configuration options. NOTE: We recommend that you use the default values on this page. In the Professional Settings screen, you can configure the following: • Band: Select the frequency band that the professional settings will be applied
  • Asus DSL-AC52U | users manual in English - Page 55
    that involve multiple Access, Points or wireless repeater, wireless clients sometimes cannot connect automatically to thefts available AP because they are time interval before a signal is sent to a wireless device in sleep mode indicating that a data packet is awaiting delivery. The default value is
  • Asus DSL-AC52U | users manual in English - Page 56
    to improve power management between wireless devices. Select Disable to switch off WMM APSD. • Enable WMM DLS: Select Enable to set WMM Direct Link Setup. • TX Power adjustment: TX Power adjustment refers to the milliWatts (mW) needed to power the radio signal output of the xDSL modem router. Enter
  • Asus DSL-AC52U | users manual in English - Page 57
    4.2.2 DHCP Server Your xDSL modem router uses DHCP to assign IP addresses automatically on your network. You can specify the IP address range and lease time for the clients on your network. To configure the DHCP server: 1. From the navigation panel, go to Advanced Settings > LAN > DHCP Server tab.
  • Asus DSL-AC52U | users manual in English - Page 58
    the DNS and WINS Server Settings section, key in your DNS Server and WINS Server IP address if needed. 7. Your xDSL modem router can also manually assign IP addresses to devices on the network. Up to 32 MAC Addresses can be added to the DHCP list for
  • Asus DSL-AC52U | users manual in English - Page 59
    router, you can configure a routing table to share the same Internet service. NOTE: We recommend that you do not change the default route settings On the Static Route List, enter the network information of other access points or nodes. Click the Add or Delete button to add or remove a device on the
  • Asus DSL-AC52U | users manual in English - Page 60
    4.2.4 IPTV The xDSL modem router supports connection to IPTV services through an ISP or a LAN. The IPTV tab provides the configuration settings needed to set up IPTV, VoIP, multicasting, and UDP for your service. Contact your ISP for specific information regarding your service. 60
  • Asus DSL-AC52U | users manual in English - Page 61
    Mode • Choose your Internet Service Provider type. The choices are VDSL WAN (PTM), ADSL WAN (ATM), Ethernet WAN. Consult your ISP if the router is unable to obtain a valid IP address or if you are unsure the WAN connection type. • Service Unit: To set the value of transmission via Internet or bridge
  • Asus DSL-AC52U | users manual in English - Page 62
    Select Yes to enable the Internet access. Select No to disable the Internet access. • Basic Config • IP version: Select your IP version type. The choices are IPv4, IPv4/IPv6, and IPv6. • WAN Connection Type: Select the correct connection type based on your ISP service type. The choices are Automatic
  • Asus DSL-AC52U | users manual in English - Page 63
    with your ISP service. • Clone or change the MAC address of the ASUS wireless router to match the MAC address of the previous networking device recognized by the ISP. 4.3.2 Dual WAN DSL-AC52U provides Dual WAN support. Select Failover mode to use a secondary WAN for backup network access. 63
  • Asus DSL-AC52U | users manual in English - Page 64
    set up Port Trigger: 1. From the navigation panel, go to Advanced Settings > WAN > Port Trigger tab. 2. Configure the following settings below. When done, click Apply Well-Known Applications: Select popular games and web services to add to the Port Trigger List. • Description: Enter a short name or
  • Asus DSL-AC52U | users manual in English - Page 65
    because it is unable to determine which PC is requesting for IRC access. When Port Trigger is enabled, the router assigns an incoming port to • Port triggering only allows one client in the network to use a particular service and a specific incoming port at the same time. • You cannot use the
  • Asus DSL-AC52U | users manual in English - Page 66
    network. Setting up Port Forwarding on your router allows PCs outside the network to access specific services provided by a PC in your network. NOTE: When port forwarding is enabled, the ASUS router blocks unsolicited inbound traffic from the Internet and only allows replies from outbound requests
  • Asus DSL-AC52U | users manual in English - Page 67
    is disabled and you set 80 as the HTTP server's port range for your WAN setup, then your http server/web server would be in conflict with the router's web port can only be used by one application or service at a time. Hence, two PCs attempting to access data through the same port at the same time
  • Asus DSL-AC52U | users manual in English - Page 68
    ASUS router. • On the Internet client, use the router's WAN IP to access the server. If port forwarding has been successful, you should be able to access triggering allows multiple computers to run applications that would normally require manually forwarding the same ports to each PC on the network.
  • Asus DSL-AC52U | users manual in English - Page 69
    outside attacks. Please be aware of the security risks involved in using DMZ. To set up DMZ: 1. From the navigation panel, go to Advanced Settings > WAN > DMZ tab. 2. Configure the setting below. When done, click Apply. • IP address of Exposed Station: Key in the client's LAN IP address that will
  • Asus DSL-AC52U | users manual in English - Page 70
    DDNS Setting up DDNS (Dynamic DNS) allows you to access the router from outside your network through the provided ASUS DDNS Service or another DDNS service. To set up DDNS: 1. From the navigation panel, go to Advanced Settings > WAN > DDNS tab. 2. Configure the following settings below. When done
  • Asus DSL-AC52U | users manual in English - Page 71
    NOTES: DDNS service will not work under these conditions: • When the xDSL modem router is using a private WAN IP address (192.168.x.x, 10.x.x.x, or 172.16.x.x), as indicated by a yellow text. • The router may be on a network that uses multiple NAT tables. 4.3.7 NAT
  • Asus DSL-AC52U | users manual in English - Page 72
    more IP addresses. This standard is not yet widely available. Contact your ISP if your Internet service supports IPv6. To set up IPv6: 1. From the navigation panel, go to Advanced Settings > IPv6 Apply. NOTE: Please refer to your ISP regarding specific IPv6 information for your Internet service. 72
  • Asus DSL-AC52U | users manual in English - Page 73
    Advanced Settings > VPN Server. 2. On the Enable VPN Server field, select Yes. 3. On the Network Place (Samba) Support field, select Yes. 4. Enter the user name and password for accessing the VPN server. Click the button. 5. Click Apply. NOTE: For advanced VPN server settings, click the VPN Server
  • Asus DSL-AC52U | users manual in English - Page 74
    Enable DoS protection, select Yes to protect your network from DoS (Denial of Service) attacks though this may affect your router's performance. 4. You can also monitor packets exchanged between the LAN and WAN connection. On the Logged packets type, select Dropped, Accepted, or Both. 5. Click Apply
  • Asus DSL-AC52U | users manual in English - Page 75
    to specific URLs. NOTE: The URL Filter is based on a DNS query. If a network client has already accessed a website such as http://www.abcxxx.com, then the website will not be blocked (a DNS cache in the system stores previously visited websites). To resolve
  • Asus DSL-AC52U | users manual in English - Page 76
    Enter a word or phrase and click the button. 4. Click Apply. NOTES: • The Keyword Filter is based on a DNS query. If a network client has already accessed a website such as http://www.abcxxx.com, then the website will not be blocked (a DNS cache in the system stores previously visited websites). To
  • Asus DSL-AC52U | users manual in English - Page 77
    Filter The Network Services Filter blocks LAN to WAN packet exchanges and restricts network clients from accessing specific web services such as Telnet or FTP. To set up a Network Service filter: 1. From the navigation panel, go to Advanced Settings > Firewall > Network Service Filter tab. 2. On
  • Asus DSL-AC52U | users manual in English - Page 78
    xDSL modem router can be used to activate WPS. • Time Zone: Select the time zone for your network. • NTP Server: The xDSL modem router can access a NTP (Network time Protocol) server in order to synchronize the time. 78
  • Asus DSL-AC52U | users manual in English - Page 79
    secure router access. • Enable Web Access from WAN: Select Yes to allow devices outside the network to access the xDSL modem router GUI settings. Select No to to prevent access. 3. Click Apply. 4.7.2 Firmware Upgrade NOTE: Download the latest firmware from the ASUS website at http://www.asus.com To
  • Asus DSL-AC52U | users manual in English - Page 80
    If the upgrade process fails, the xDSL modem router automatically enters rescue mode and the power LED indicator on the front panel starts flashing slowly. To recover or restore the system, refer to section 5.2 Firmware Restoration. 4.7.3 Restore/Save/Upload Setting To restore/save/upload xDSL modem
  • Asus DSL-AC52U | users manual in English - Page 81
    Setting This page allows you to configure your DSL settings. IMPORTANT! Please contact your ISP to obtain your DSL settings before doing any changes. You can configure the following settings: • DSL Modulation: This device supports VDSL2, ADSL2+, ADSL2, G.DMT, T1.413 and G.lite. The system Auto Sync
  • Asus DSL-AC52U | users manual in English - Page 82
    • Annex Mode: This device supports different DSL Variant (Annex) - Annex A, Annex I, Annex A/L, Annex M, A/J/J/L/M (multiple-mode), Annex B, Annex B/J (multiple-mode). Contact your ISP to find out the DSL variant (annex) that is used on your DSL line. • Dynamic Line Adjustment (ADSL): This function
  • Asus DSL-AC52U | users manual in English - Page 83
    . • VDSL Profile: This item allows you to configure the VDSL Profile. The default value is 30a multi mode. NOTE: For some ISPs with non-standard 30a multi mode VDSL DSLAM sync setting, such as for ISP services in Germany, set the VDSL Profile to 17a multi mode to sync up the VDSL line. 83
  • Asus DSL-AC52U | users manual in English - Page 84
    4.7.5 Feedback DSL feedback is used to diagnose problems and help to improve the user experience of ASUS xDSL modem router. Complete the form, and it will be send to ASUS Support Team. 84
  • Asus DSL-AC52U | users manual in English - Page 85
    , go to Advanced Settings > System Log. 2. You can view your network activities in any of these tabs: • General Log • DHCP Leases • Wireless Log • Port Forwarding • DSL Log 85
  • Asus DSL-AC52U | users manual in English - Page 86
    to configure the wireless networking settings. To launch the Device Discovery utility: • From your computer's desktop, click Start > All Programs > ASUS Utility > Device Discovery. NOTE: When you set the router to Access Point mode, you need to use Device Discovery to get the router's IP address. 86
  • Asus DSL-AC52U | users manual in English - Page 87
    process takes about three to four minutes. IMPORTANT: Launch the rescue mode on the router before using the Firmware Restoration utility. NOTE: This feature is not supported on MAC OS. To launch the rescue mode and use the Firmware Restoration utility: 1. Unplug the xDSL modem router from the power
  • Asus DSL-AC52U | users manual in English - Page 88
    desktop, click Start > All Programs > ASUS Utility DSL-AC52U xDSL modem router > Firmware Restoration. 5. Specify a firmware file, then click Upload. NOTE: This is not a firmware upgrade utility and cannot be used on a working ASUS XDSL modem router. Normal firmware upgrades must be done through the
  • Asus DSL-AC52U | users manual in English - Page 89
    Windows® 7. To set up the EZ Printer sharing mode: 1. From the navigation panel, go to General > USB Application > Network Printer Server. 2. Click Download Now! to download the network printer utility. NOTE: Network printer utility is supported on Windows® XP, Windows® Vista, and Windows® 7 only
  • Asus DSL-AC52U | users manual in English - Page 90
    4. Follow the onscreen instructions to set up your hardware, then click Next. 5. Wait a few minutes for the initial setup to finish. Click Next. 6. Click Finish to complete the installation. DSL-AC52U 90
  • Asus DSL-AC52U | users manual in English - Page 91
    7. Follow the Windows® OS instructions to install the printer driver. 8. After the printer's driver installation is complete, network clients can now use the printer. 91
  • Asus DSL-AC52U | users manual in English - Page 92
    5.3.2 Using LPR to Share Printer You can share your printer with computers running on Windows® and MAC operating system using LPR/LPD (Line Printer Remote/ Line Printer Daemon). Sharing your LPR printer To share your LPR printer: 1. From the Windows® desktop, click Start > Devices and Printers > Add
  • Asus DSL-AC52U | users manual in English - Page 93
    3. Select Create a new port then set Type of Port to Standard TCP/IP Port. Click New Port. 4. In the Hostname or IP address field, key in the IP address of the xDSL modem router then click Next. 93
  • Asus DSL-AC52U | users manual in English - Page 94
    5. Select Custom then click Settings. 6. Set Protocol to LPR. In the Queue Name field, key in LPRServer then click OK to continue. 94
  • Asus DSL-AC52U | users manual in English - Page 95
    7. Click Next to finish setting up the standard TCP/IP port. 8. Install the printer driver from the vendor-model list. If your printer is not in the list, click Have Disk to manually install the printer drivers from a CD-ROM or file. 95
  • Asus DSL-AC52U | users manual in English - Page 96
    9. Click Next to accept the default name for the printer. 10. Click Finish to complete the installation. 96
  • Asus DSL-AC52U | users manual in English - Page 97
    5.4 Download Master Download Master is a utility that helps you download files even while your laptops or other devices are switched off. NOTE: You need a USB device connected to the xDSL modem router to use Download Master. To use Download Master: 1. Click General > USB application > Download
  • Asus DSL-AC52U | users manual in English - Page 98
    5. Use the navigation panel to configure the advanced settings. 5.4.1 Configuring Bit Torrent download settings To configure BitTorrent download settings: 1. From Download Master's navigation panel, click Bit Torrent to launch the Bit Torrent Setting page. 2. Select a specific port for your download
  • Asus DSL-AC52U | users manual in English - Page 99
    5.4.2 NZB settings You can set up a USENET server to download NZB files. After entering USENET settings, Apply. 99
  • Asus DSL-AC52U | users manual in English - Page 100
    .com/ for more product information and contact details of ASUS Technical Support. 6.1 Basic Troubleshooting If you are having problems with your router, try these basic steps in this section before looking for further solutions. Upgrade Firmware to the latest version. 1. Launch the Web GUI. Go to
  • Asus DSL-AC52U | users manual in English - Page 101
    Ethernet cable connecting the router with the modem is plugged in properly, the WAN LED will be on. • When the Ethernet cable connecting your powered-on • Each client on the network should have a valid IP address. ASUS recommends that you use the xDSL modem router's DHCP server to assign IP
  • Asus DSL-AC52U | users manual in English - Page 102
    • Some cable modem service providers require you to use the MAC address of the computer initially registered on the account. You can view the MAC address in the web GUI, Network Map > Clients page, and hover the mouse pointer over your device in Client Status. 102
  • Asus DSL-AC52U | users manual in English - Page 103
    6.2 Frequently Asked Questions (FAQs) I cannot access the router GUI using a web browser • If your computer is wired, check the Ethernet cable to obtain IP addresses automatically. For more details, refer to Chapter 1 of this user manual. • Ensure that you use CAT5e or CAT6 ethernet cables. 103
  • Asus DSL-AC52U | users manual in English - Page 104
    cannot establish a wireless connection with the router. NOTE: If you are having issues connecting to 5GHz network, make sure that your wireless device supports 5GHz or features dual band capabilities. • Out of Range: • Move the router closer to the wireless client. • Try to adjust antennas of the
  • Asus DSL-AC52U | users manual in English - Page 105
    , check if the wireless channel in use conforms to the channels available in your country/area. If not, adjust the channel, channel bandwidth, and wireless mode. • If you still cannot connect to the router wirelessly, you can reset your router to factory default settings. In the router GUI,click
  • Asus DSL-AC52U | users manual in English - Page 106
    to your ISP's WAN IP address, try restarting your network as described in the section Restart your network in following sequence under Basic Troubleshooting. • The device there is still no Internet access, try to reboot your computer and verify the network's IP address and gateway address.
  • Asus DSL-AC52U | users manual in English - Page 107
    : Yes (if WAN cable is plugged in) 192.168.1.1 Domain Name: (Blank) Subnet Mask: 255.255.255.0 DNS Server 1: DNS Server 2: 192.168.1.1 (Blank) SSID (2.4GHz): ASUS SSID (5GHz): ASUS_5G Firmware upgrade failed. Launch the rescue mode and run the Firmware Restoration utility
  • Asus DSL-AC52U | users manual in English - Page 108
    Cannot access Web GUI Before configuring your xDSL modem router, do the steps described in this section for your host computer and network clients. A. Disable the proxy
  • Asus DSL-AC52U | users manual in English - Page 109
    MAC OS 1. From your Safari browser, click Safari > Preferences > Advanced > Change Settings... 2. From the Network screen, deselect FTP Proxy and Web Proxy (HTTP). 3. Cllick Apply Now when done. NOTE: Refer to your browser's help feature for details on disabling the proxy server. B. Set the TCP/
  • Asus DSL-AC52U | users manual in English - Page 110
    TCP/IP tab, select Using DHCP in the Configure IPv4 dropdown list. 4. Cllick Apply Now when done. NOTE: Refer to your operating system's help and support feature for details on configuring your computer's TCP/IP settings. 110
  • Asus DSL-AC52U | users manual in English - Page 111
    C. Disable the dial-up connection, if enabled. Windows® 7 1. Click Start > Internet Explorer to launch the browser. 2. Click Tools > Internet options > Connections tab. 3. Tick Never dial a connection. 4. Click OK when done. NOTE: Refer to your browser's help feature for details on disabling the
  • Asus DSL-AC52U | users manual in English - Page 112
    Appendices Notices ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to other components, as well as the packaging materials. Please go to http://csr.asus. com/english/Takeback.htm for the detailed recycling information in different regions. REACH
  • Asus DSL-AC52U | users manual in English - Page 113
    This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this
  • Asus DSL-AC52U | users manual in English - Page 114
    Safety Information To maintain compliance with FCC's RF exposure guidelines, this equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Use on the supplied antenna. Declaration of Conformity for R&TTE directive 1999/5/EC Essential requirements -
  • Asus DSL-AC52U | users manual in English - Page 115
    operation of the device. Radio Frequency (RF) Exposure Information The radiated output power of the ASUS Wireless Device is below the Industry Canada (IC) radio frequency exposure limits. The ASUS Wireless Device should be used in such a manner such that the potential for human contact during
  • Asus DSL-AC52U | users manual in English - Page 116
    of the GPL with every CD shipped with our product. All future firmware updates will also be accompanied with their respective source code. Please visit our site for updated information. Note that we do not offer direct support for the distribution. GNU GENERAL PUBLIC LICENSE Version 2, June 1991
  • Asus DSL-AC52U | users manual in English - Page 117
    price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces
  • Asus DSL-AC52U | users manual in English - Page 118
    is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations. Finally, any free program is threatened constantly by software patents. We wish to avoid
  • Asus DSL-AC52U | users manual in English - Page 119
    act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does. 1. You may copy and distribute
  • Asus DSL-AC52U | users manual in English - Page 120
    the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.) These requirements apply to the
  • Asus DSL-AC52U | users manual in English - Page 121
    , unless that component itself accompanies the executable. If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third
  • Asus DSL-AC52U | users manual in English - Page 122
    Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 6. Each time you redistribute the Program (or any
  • Asus DSL-AC52U | users manual in English - Page 123
    License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and "any
  • Asus DSL-AC52U | users manual in English - Page 124
    Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12 IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW
  • Asus DSL-AC52U | users manual in English - Page 125
    For Turkey only Authorised distributors in Turkey: BOGAZICI BIL GISAYAR SAN. VE TIC. A.S. Tel. No.: +90 212 3311000 Address: AYAZAGA MAH. KEMERBURGAZ CAD. NO.10 AYAZAGA/ISTANBUL CIZGI Elektronik San. Tic. Ltd. Sti. Tel. No.: +90 212 3567070 Address: CEMAL SURURI CD. HALIM MERIC IS MERKEZI
  • Asus DSL-AC52U | users manual in English - Page 126
    . (Asia Pacific) Address 15 Li-Te Road, Peitou, Taipei, Taiwan 11259 Website www.asus.com.tw Technical Support Telephone Support Fax Online support +886228943447 +886228907698 support.asus.com ASUS COMPUTER INTERNATIONAL (America) Address 800 Corporate Way, Fremont, CA 94539, USA Telephone
  • Asus DSL-AC52U | users manual in English - Page 127
    Number 800-92491 0033-170949400 0049-1805010920 0049-1805010923 (component support) 0049-2102959911 ( Fax ) 0036-15054561 199-400089 0041-848111010 0041-848111014 0041-848111012 0044-1442265548 0035-31890719918 008-800-100-ASUS 0038-0445457727 Service Hours 09:00-13:00 ; 14:00-18:00 Mon-Fri 09:
  • Asus DSL-AC52U | users manual in English - Page 128
    0065-67203835 ( Repair Status Only ) 0060-320535077 1800-18550163 1800-2090365 0062-2129495000 500128 (Local Only) 1900-555581 00852-35824770 1-812-282-2787 001-8008367847 Service Hours 09:00-18:00 Mon-Fri 09:00-18:00 Mon-Fri 09:00-18:00 Mon-Fri 09:00-17:00 Sat-Sun
  • Asus DSL-AC52U | users manual in English - Page 129
    00368-59045401 00372-6671796 00371-67408838 00370-37329000 00370-522101160 Service Hours 09:00-18:00 Sun-Thu 09:00-18 00-18:00 Mon-Fri NOTE: For more information, visit the ASUS support site at: http://support.asus.com Manufacturer: Authorised representative in Europe: ASUSTeK Computer Inc. Tel:
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
DSL-AC52U
Wireless-AC1200
Dual-band 802.11ac VDSL/ADSL
Modem Router
User Guide
Dual Band 802.11ac
Wi-Fi ADSL / VDSL Modem Router