Asus DSL-N10 User Manual - Page 38

Problem, Action, is unable to establish - modem

Page 38 highlights

Problem Cannot access the Internet via wireless LAN adapter. Internet is not accessible. If the ADSL indicator light blinks continuously or stays off, Internet access is not possible - the Router is unable to establish a connection with the ADSL network. Network name or encryption keys are forgotten. Action • Move the router closer to the wireless client. • Check whether the wireless adapter is connected to the correct wireless router. • Check whether the wireless channel in use conforms to the channels available in your country/area. • Check the encryption settings. • Check if the ADSL or Cable connection is correct. • Retry using another Ethernet cable. • Check if the wireless indicator on the front panel is off. Press the Wireless On/Off button at the rear panel. • Check the status indicators on the ADSL modem and the wireless router. • Check if the WAN LED on the wireless router is ON. If the LED is not ON, change the cable and try again. • Check if the wireless indicator on the front panel is off. Press the Wireless On/Off button at the rear panel. • Ensure that all your cables are all properly connected . • Disconnect the power cord from the ADSL or cable modem, wait a few minutes, then reconnect the cord. • If the ADSL light continues to blink or stays OFF, contact your ADSL service provider. • Try setting up the wired connection and configuring the wireless encryption again. • Press the Restore button at the rear panel of the wireless router for more than five seconds. 38 DSL-N10 Chapter 6: Troubleshooting

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52

²8
DSL-N10
Chapter 6: Troubleshooting
Problem
Action
Cannot access the Internet
via wireless LAN adapter.
Move the router closer to the wireless client.
Check whether the wireless adapter is
connected to the correct wireless router.
Check whether the wireless channel in use
conforms to the channels available in your
country/area.
Check the encryption settings.
Check if the ADSL or Cable connection is
correct.
Retry using another Ethernet cable.
Check if the wireless indicator on the front
panel is off. Press the Wireless On/Off
button at the rear panel.
Internet is not accessible.
Check the status indicators on the ADSL
modem and the wireless router.
Check if the WAN LED on the wireless
router is ON. If the LED is not ON, change
the cable and try again.
Check if the wireless indicator on the front
panel is off. Press the Wireless On/Off
button at the rear panel.
If the ADSL indicator light
blinks continuously or
stays off, Internet access
is not possible - the Router
is unable to establish a
connection with the ADSL
network.
Ensure that all your cables are all properly
connected .
Disconnect the power cord from the ADSL
or cable modem, wait a few minutes, then
reconnect the cord.
If the ADSL light continues to blink or stays
OFF, contact your ADSL service provider.
Network name or encryption
keys are forgotten.
Try setting up the wired connection and
configuring the wireless encryption again.
Press the Restore button at the rear panel
of the wireless router for more than five
seconds.