Asus ET2410IUTS-B019C User Manual - Page 25

English 4. Secure the wall mount pad to the adapter with the four screws (M3 x 8L) that came with the kit, noting the correct orientation. 5. By following the instructions in the installation manual that came with your wall mount kit (VESA100), fasten the wall mount bracket to the wall using the four screws (M4 x 10L) provided in the kit. Upright your All-in-one PC and hook it on to the wall by sliding the grooves of the wall mount pad into the bracket . The wall mount kit in this illustration is for reference only. 1. For machine ventilation, be sure to leave a distance of at least 6cm between the All-in-one PC and the wall. 2. The wall mount kit should comply with VESA standards. 3. To ensure safety, please read the wall mount kit installation manual carefully before mounting your All-in-one PC to the wall. 4. At least two persons are required to install or remove the All-in-one PC onto and from the wall to avoid hazard of falling objects and breakage. Qualified personnel is recommended. 5. The wall should be able to sustain four times the weight of the All-in-on PC and wall mount components combined (40kg at least). The mounting location must be able to withstand earthquake or other impacts. Cement or masonry walls recommended. All-in-one PC ET2410/ ET2210 Series 25