Asus K8V Deluxe K8 series Quick Setup Guide

Asus K8V Deluxe Manual

Get Asus K8V Deluxe PDF manuals and user guides View all Asus K8V Deluxe manuals
Add to My Manuals
Save this manual to your list of manuals

Asus K8V Deluxe manual content summary:

  • Asus K8V Deluxe | K8 series Quick Setup Guide - Page 1
    detailed setup instructions, refer to the User Guide. What's in the box? Check your motherboard package for the following items. Motherboard 80-Conductor IDE signal cable ® 40-Conductor IDE signal cable Floppy disk signal cable Serial ATA signal cable Bag of jumper caps Motherboard support CD
  • Asus K8V Deluxe | K8 series Quick Setup Guide - Page 2
    Installation WARNING! Do not connect any power cable to live AC outlets until configuration and setup is complete. 1 Install memory modules 1. Unlock the DIMM socket by pressing the retaining clips outward. 2. Align a DIMM on the socket such that the notch on the DIMM matches the break on the
  • Asus K8V Deluxe | K8 series Quick Setup Guide - Page 3
    to indicate that it is locked. 5. Install a heatsink with fan assembly. (Refer to the documentation that came with the heatsink with fan and the motherboard user guide.) 6. Connect the CPU fan power cable to the CPU fan connector on the motherboard. Socket Small triangle Heatsink with fan Lever
  • Asus K8V Deluxe | K8 series Quick Setup Guide - Page 4
    NOTE: The following procedure applies to most standard chassis. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it. 1. Screw the standoffs that came with your chassis into the appropriate screw holes on the chassis. 2. Remove
  • Asus K8V Deluxe | K8 series Quick Setup Guide - Page 5
    signal cable and power cable. 4. If installing IDE hard disk drives, connect the IDE signal cable and power cable. 5. If installing SATA hard disk drives, connect the SATA signal cable and power cable. Floppy disk IDE IDE signal cable Serial ATA Power cable Floppy disk signal cable Power cable
  • Asus K8V Deluxe | K8 series Quick Setup Guide - Page 6
    sure the side of the cable with the colored stripe is plugged into pin 1 of the IDE connector. 3. If you're using SATA hard disk drives, connect the SATA signal cable. The SATA connector fits only in one orientation. If the connector doesn't fit, try reversing it. Floppy disk IDE Serial ATA 6
  • Asus K8V Deluxe | K8 series Quick Setup Guide - Page 7
    cable On the front of your chassis, you will find some LED and power switch leads. Connect these leads to the panel connector on the motherboard. 7 Install expansion cards 1. Remove the slot covers from the chassis where you wish to install the expansion cards. 2. Install your AGP graphics card in
  • Asus K8V Deluxe | K8 series Quick Setup Guide - Page 8
    -pin power plug such that the plastic clip on the side matches the plastic tab on motherboard power connector. The plug is in place when the clip snaps over the tab. 2. wattage is 350W. The system may become unstable or may not boot up if the power is inadequate. 20-pin connector 4-pin connector 8
  • Asus K8V Deluxe | K8 series Quick Setup Guide - Page 9
    9 Connect the peripherals and accessories Power strip AC Keyboard Digital Speakers PDA cradle PS/2 S/PDIF Serial Storage device USB Microphone Mic Speakers Line Out PS/2 Mouse Parallel Printer IEEE 1394 RJ-45 Line in Mobile HDD Switch Hub Tape recorder VGA CRT Monitor DVI Flat
  • Asus K8V Deluxe | K8 series Quick Setup Guide - Page 10
    type. • Make sure that the memory modules are properly inserted into the sockets. • Make sure that you are using a tested and qualified memory module. See User Guide for the memory Qualified Vendors List (QVL). • Check the floppy drive configuration in the BIOS setup. • Check the floppy drive
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
1
English
Getting Started
This Quick Setup Guide will help you get your motherboard up and running quickly. Refer to the Quick Reference Card included in
the User Guide when using this Quick Setup Guide. For detailed setup instructions, refer to the User Guide.
What’s in the box?
Check your motherboard package for the following items.
Motherboard
80-Conductor IDE
signal cable
Floppy disk
signal cable
Bag of jumper
caps
User Guide
Motherboard
support CD
40-Conductor IDE
signal cable
Quick Setup Guide
SAFETY INFORMATION
Computer components are extremely sensitive to electrostatic discharge (ESD).
Before handling any
components, be sure to wear an anti-static wrist strap (not included) and touch a grounded metal object to
release any built-up static electricity.
Serial ATA
signal cable