Asus K8V K8 series Quick Setup Guide

Asus K8V Manual

Get Asus K8V PDF manuals and user guides View all Asus K8V manuals
Add to My Manuals
Save this manual to your list of manuals

Asus K8V manual content summary:

  • Asus K8V | K8 series Quick Setup Guide - Page 1
    Card included in the User Guide when using this Quick Setup Guide. For detailed setup instructions, refer to the User Guide. What's in the box? Check your motherboard package for the following items. Motherboard jumper caps Motherboard support CD Quick Setup Guide User Guide SAFETY INFORMATION
  • Asus K8V | K8 series Quick Setup Guide - Page 2
    English Installation WARNING! Do not connect any power cable to live AC outlets until configuration and setup is complete. 1 Install memory modules 1. Unlock the DIMM socket by pressing the retaining clips outward. 2. Align a DIMM on the socket such that the notch on the DIMM matches the
  • Asus K8V | K8 series Quick Setup Guide - Page 3
    tab to indicate that it is locked. 5. Install a heatsink with fan assembly. (Refer to the documentation that came with the heatsink with fan and the motherboard user guide.) 6. Connect the CPU fan power cable to the CPU fan connector on the
  • Asus K8V | K8 series Quick Setup Guide - Page 4
    metal shield on the rear panel that covers the rear I/O slot opening. 3. Install the rear I/O shield that came with the motherboard package. Orient the I/O shield such that the openings for the keyboard and mouse ports are aligned to the top of the chassis fan. 4. Position the I/O side of the
  • Asus K8V | K8 series Quick Setup Guide - Page 5
    4 Install hard disk and floppy drives 1. If installing two IDE hard disk drives on the same cable, set one device as "Master" and the other as "Slave." Check the label on the IDE device for the jumper settings. 2. Mount the drives in the chassis. 3. Connect the floppy disk signal cable and power
  • Asus K8V | K8 series Quick Setup Guide - Page 6
    English 5 Connect drive signal cables 1. Connect the floppy disk signal cable. Make sure the side of the cable with the colored stripe is plugged into pin 1 of the floppy disk connector. 2. If you are using IDE hard disk drives, connect the IDE signal cable. Make sure the side of the cable with the
  • Asus K8V | K8 series Quick Setup Guide - Page 7
    leads. Connect these leads to the panel connector on the motherboard. 7 Install expansion cards 1. Remove the slot covers from the chassis where you wish to install the expansion cards. 2. Install your AGP graphics card in the proper slot. 3. Press the card firmly into the slot. 4. Secure the
  • Asus K8V | K8 series Quick Setup Guide - Page 8
    the 20-pin power plug such that the plastic clip on the side matches the plastic tab on motherboard power connector. The plug is in place when the clip snaps over the tab. 2. Follow step 1 to connect the 4-pin ATX 12V power plug. IMPORTANT!
  • Asus K8V | K8 series Quick Setup Guide - Page 9
    and accessories Power strip AC Keyboard Digital Speakers PDA cradle PS/2 S/PDIF Serial Storage device USB Microphone Mic Speakers Line Out PS/2 Mouse Parallel Printer IEEE 1394 RJ-45 Line in Mobile HDD Switch Hub Tape recorder VGA CRT Monitor DVI Flat Panel Monitor 9 English
  • Asus K8V | K8 series Quick Setup Guide - Page 10
    the graphics card is inserted properly in its expansion slot. • Check the memory modules and make sure they are of the correct type. • Make sure that the memory modules are properly inserted into the sockets. • Make sure that you are using a tested and qualified memory module. See User Guide for
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
1
English
Getting Started
This Quick Setup Guide will help you get your motherboard up and running quickly. Refer to the Quick Reference Card included in
the User Guide when using this Quick Setup Guide. For detailed setup instructions, refer to the User Guide.
What’s in the box?
Check your motherboard package for the following items.
Motherboard
80-Conductor IDE
signal cable
Floppy disk
signal cable
Bag of jumper
caps
User Guide
Motherboard
support CD
40-Conductor IDE
signal cable
Quick Setup Guide
SAFETY INFORMATION
Computer components are extremely sensitive to electrostatic discharge (ESD).
Before handling any
components, be sure to wear an anti-static wrist strap (not included) and touch a grounded metal object to
release any built-up static electricity.
Serial ATA
signal cable