Asus M5A99X EVO User Manual - Page 40
JMicron, JMB362 Serial ATA 3.0 Gb/s connectors 7-pin SATA3G_E1/E2 [black] - bundle
View all Asus M5A99X EVO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
2. JMicron® JMB362 Serial ATA 3.0 Gb/s connectors (7-pin SATA3G_E1/E2 [black]) These connectors connect to Serial ATA 3.0 Gb/s hard disk drives and optical disc drives via Serial ATA 3.0 Gb/s signal cables. • These connectors are set to [AHCI Mode] by default. If you intend to create a Serial ATA RAID set using these connectors, set the SATA Mode item in the BIOS to [RAID Mode]. Refer to section 3.5.3 SATA Configuration for details. • Before creating a RAID set, refer to section 4.4 RAID configurations or the manual bundled in the motherboard support DVD. • When using NCQ, set the SATA Mode in the BIOS to [AHCI Mode]. Refer to section 3.5.3 SATA Configuration for details. • You must install Windows® XP Service Pack 3 or later versions before using Serial ATA hard disk drives. The Serial ATA RAID feature is available only if you are using Windows® XP SP3 or later versions. Chapter 2 2-22 Chapter 2: Hardware information