Asus M5A99X EVO User Manual - Page 79
North Bridge Configuration, IOMMU Mode [Disabled], Initiate Graphic Adapter [PEG/PCI]
View all Asus M5A99X EVO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
3.5.2 North Bridge Configuration UEFI BIOS Utility - Advanced Mode Main Back Ai Tweaker Advanced Advanced\ North Bridge Configuration > Monitor North Bridge Configuration IOMMU Mode > Memory Configuration Disabled Initate Graphic Adapter Starting Address: 0 KB Ending Address: 5242880 KB PEG/PCI Dimm0: Not Present Dimm1: size=2048 MB, speed=1333 MHz Dimm2: Not Present Dimm3: size=2048 MB, speed=1333 Mhz Exit Boot Tool IOMMU is supported on LINUX based systems to convert 32bit I/O to 64bit MMIO. IOMMU Mode [Disabled] IOMMU is supported on LINUX based systems to convert 32bit I/O to 64bit MMIO. Configuration options: [Disabled] [64MB] Memory Configuration Bank Interleaving [Auto] Configuration options: [Aute] [Disabled] Channel Interleaving [Auto] Configuration options: [Aute] [Disabled] ECC Mode [Enable] Enables or disables the DRAM ECC mode that allows the hardware to report and correct memory errors. [Disabled] Disables the DRAM ECC mode. [Enable] Set to [Enable] to adjust ECC mode automatically. Power Down Enable [Disabled] Enables or disables the DDR power down mode. Configuration options: [Disabled] [Enabled] Memory Hole Remapping [Enabled] Configuration options: [Disabled] [Enabled] DCT Unganged Mode [Enabled] Configuration options: [Disabled] [Enabled] Initiate Graphic Adapter [PEG/PCI] Allows you to decide which graphics controller to use as the primary boot device. Configuration options: [PCI/PEG] [PEG/PCI] Chapter 3 ASUS M5A99X EVO 3-15