Asus P10S-E/4L P10S-E4L User Guide

Asus P10S-E/4L Manual

Get Asus P10S-E/4L PDF manuals and user guides View all Asus P10S-E/4L manuals
Add to My Manuals
Save this manual to your list of manuals

Asus P10S-E/4L manual content summary:

  • Asus P10S-E/4L | P10S-E4L User Guide - Page 1
    P10S-E/4L Motherboard
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 2
    Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. ASUS PROVIDES THIS MANUAL "AS IS" WITHOUT WARRANTY
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 3
    Special features 1-3 1.4.1 Product highlights 1-3 1.4.2 Innovative ASUS features 1-5 Chapter 2: Hardware Information 2.1 Before you proceed 2-2 2.2 Motherboard overview 2-3 2.2.1 Placement direction 2-3 2.2.2 Screw holes 2-4 2.2.3 Motherboard layout 2-5 2.2.4 Layout contents 2-6 2.3 Central
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 4
    Using the dual function power switch 3-3 Chapter 4: BIOS Setup 4.1 Managing and updating your BIOS 4-2 4.1.1 ASUS CrashFree BIOS 3 utility 4-2 4.1.2 ASUS EzFlash Utility 4-3 4.1.3 BUPDATER utility 4-4 4.2 BIOS setup program 4-6 4.2.1 BIOS menu screen 4-7 4.2.2 Menu bar 4-7 4.2.3 Menu items
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 5
    menu 4-44 4.8 Tool menu 4-44 4.9 Save & Exit menu 4-45 4.10 Server Mgmt menu 4-46 4.11 Event Logs menu 4-49 Chapter 5: RAID Configuration 5.1 Setting Installing hard disk drives 5-3 5.1.3 Setting the RAID mode in BIOS 5-3 5.1.4 RAID configuration utilities 5-3 5.2 Intel® Rapid Storage
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 6
    Utilities menu tab 6-7 6.3.3 Manual menu tab 6-8 6.3.4 Contact information menu 6-8 6.3.5 Installing the Intel® Chipset device Software driver 6-9 6.4 Installing the Intel® I210 Gigabit Adapters driver 6-12 6.5 Installing the VGA driver 6-15 Appendix A.1 P10S-E/4L block diagram A-2 Simplified
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 7
    . This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer's instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 8
    ICES-3(B)/NMB-3(B) REACH Complying with the REACH (Registration, Evaluation, Authorization, and Restriction of Chemicals) regulatory framework, we publish the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm. viii
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 9
    service technician or your retailer. Operation safety • Before installing the motherboard and adding devices on it, carefully read all the manuals encounter technical problems with the product, contact a qualified service technician or your retailer. DO NOT throw the motherboard in municipal waste
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 10
    Consumer Law. For the latest product warranty details please visit https://www.asus.com/support/. Our goods come with guarantees that cannot be excluded under the Australian . If you require assistance please call ASUS Customer Service 1300 2787 88 or visit us at https://www.asus.com/support/. x
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 11
    note of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task IMPORTANT: Instructions that you MUST follow to complete a task
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 12
    (NGFF 2280/2260/2242, PCIE or SATA signal, gray SATA port will disable when M.2 is SATA signal) - Intel® RSTe (Windows & Linux) (Supports software RAID 0, 1, 10, & 5) Optional Kits: - ASUS PIKE II 3008-8i 8-port SAS 12G RAID card - ASUS PIKE II 3108-8i 8-port SAS 12G HW RAID card * Refer to www
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 13
    Networking Graphic Onboard I/O Connectors Rear I/O Connectors Management Solution Monitoring Environment LAN VGA TPM Header PSU Connector Management Header USB Connector/ Header Fan Header SMBus Chassis Intruder Front LAN LED Serial Port Header Device Power Connector VGA Header M.2 Connector
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 14
    xiv
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 15
    Chapter 1: Product Introduction Chapter 1: Product Introduction
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 16
    1.1 Welcome! Thank you for buying an ASUS® P10S-E/4L motherboard! The motherboard delivers a host of new features and latest technologies, making it another standout in the long line of ASUS quality motherboards! Before you start installing the motherboard and hardware devices on it, check the items
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 17
    serial number of the product, ASUS Technical Support team members can then offer a quicker and satisfying solution to your problems. P10S-E/4L xxS2xxxxxxxx Made in China 合格 1.4 Special features 1.4.1 Product highlights Latest processor technology This motherboard supports the latest Intel® Xeon
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 18
    the CPU voltage and core frequency depending on the CPU loading and system speed or power requirement. Serial ATA III technology The motherboard supports the Serial ATA III 6 Gb/s technology through the Serial ATA interface and Intel® C236 chipset. Get enhanced scalability, faster data retrieval
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 19
    according to the system loading to ensure quiet, cool, and efficient operation. ASUS MIO Audio card The ASUS MIO audio card is a discrete 8-channel high definition audio (High Definition Audio send different audio streams to different destinations for high-end sound quality. ASUS P10S-E/4L 1-5
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 20
    1-6 Chapter 1: Product Introduction
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 21
    Chapter 2: Hardware Information Chapter 2: Hardware Information
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 22
    2.1 Before you proceed Take note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before touching any component. • Use a grounded wrist strap or touch a safely grounded object or a metal object,
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 23
    physical injury and damage motherboard components! 2.2.1 Placement direction When installing the motherboard, ensure that you place it into the chassis in the correct orientation. The edge with external ports goes to the rear part of the chassis as indicated in the image below. ASUS P10S-E/4L 2-3
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 24
    2.2.2 Screw holes Place nine (9) screws into the holes indicated by circles to secure the motherboard to the chassis. Place this side towards the rear of the chassis DO NOT overtighten the screws! Doing so can damage the motherboard. 2-4 Chapter 2: Hardware Information
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 25
    2.2.3 Motherboard layout ASUS P10S-E/4L 2-5
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 26
    2.2.4 Layout contents Slots/Sockets 1. CPU sockets 2. DDR4 sockets 3. PCI Express x16 / PCI Express x8 /PCI Express x8 / PCI slot Page 2-8 2-14 2-17 Onboard LEDs 1. Standby Power LED (SBPWR1) 2. Baseboard Management Controller LED (BMCLED1) 3. CPU Warning LED (ERRCPU1) 4. Message
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 27
    . Chassis intrusion connector (2-pin INTRUSION1) Page 2-31 2-31 2-32 2-32 2-33 2-33 2-34 2-34 2-35 2-35 2-36 2-37 2-37 2-38 2-39 2-40 2-41 2-41 2-42 ASUS P10S-E/4L 2-7
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 28
    are not bent. Contact your retailer immediately if the PnP cap is missing, or if you see any damage to the PnP cap/socket contacts/motherboard components. ASUS will shoulder the cost of repair only if the damage is shipment/ transit-related. • The product warranty does not cover damage to the socket
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 29
    CPU into the socket to prevent bending the pins on the socket and damaging the CPU. Gold triangle mark Alignment key CPU notches Alignment key ASUS P10S-E/4L 2-9
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 30
    5. Close the load plate (A), ensuring that the front edge of the load plate slides under the retention lock (B) then push down the load lever (C). Load lever Retention lock 6. Insert the load lever under the retention tab to remove the PnP cap from the CPU socket. Load lever Retention tab 7.
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 31
    sure that the four fasteners match the holes on the motherboard. 2. Push down two fasteners at a time in a diagonal sequence to secure the heatsink and fan assembly in place. Orient the heatsink and fan assembly such that the CPU fan cable is closest to the CPU fan connector. ASUS P10S-E/4L 2-11
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 32
    Uninstalling the CPU heatsink and fan To uninstall the CPU heatsink and fan: 1. Disconnect the CPU fan cable from the connector on the motherboard. 2. Rotate each fastener counterclockwise. 3. Pull up two fasteners at a time in a diagonal sequence to disengage the heatsink and fan assembly from the
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 33
    Peel off the sticker on the heatsink metal plate and affix the plate to the back of the motherboard, matching the standoffs to the heatsink screw holes. 2. Use a Phillips screwdriver to tighten the four overheat. 2. Do not overtighten the screws. Doing so can damage the CPU. ASUS P10S-E/4L 2-13
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 34
    2.4 System memory 2.4.1 Overview The motherboard comes with four Double Data Rate 4 (DDR4) Dual Inline Memory Modules (DIMM) sockets. A DDR4 module is notched differently from a DDR, DDR2, or DDR3 module. DO
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 35
    or more DIMMs, refer to the user guide bundled in the motherboard package. • Refer to the user guide for qualified vendor lists of the memory Support the DIMM lightly with your fingers when pressing the retaining clips. The DIMM might get damaged when it flips out with extra force. ASUS P10S-E/4L
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 36
    Remove the system unit cover (if your motherboard is already installed in a chassis). 3. BIOS setup. 2. Assign an IRQ to the card. Refer to the tables on the next page. 3. Install the software drivers for the expansion card. When using PCI cards on shared slots, ensure that the drivers support
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 37
    various server class high performance add-on cards. 2.5.6 PCI Express x8 slot (x4 Gen3 link) The onboard PCIE4 slot provides one x4 Gen3 link to the Intel® C236 PCH. 2.5.7 PCI slot The PCI 1 slot supports cards such as LAN, USB, and other cards that comply with PCI specifications. ASUS P10S-E/4L
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 38
    No.(Slot location) Short Description 1 (slot 7) 2 (slot 6) 3 (slot 5) 4 (slot 4) 5 (slot 1) MIO1 PCIE6 PCIE5 PCIE4 PCI1 MIO slot PCI-E x16 (x16 Gen3 link) (Auto switch to x8 link if slot 5 is occupied) PCI-E x8 (x8 Gen3 link) PCI-E x8 (x4 Gen3 link) PCI 32 bit / 33 MHz 2-18 Chapter 2: Hardware
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 39
    the Baseboard Management Card header on the motherboard. 2. Orient and press the Management Card in place. The motherboard illustration is for reference only. The motherboard layout and appearance may vary depending on the model, but the installation steps remain the same. ASUS P10S-E/4L 2-19
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 40
    2.5.9 Installing the Audio card 1. Locate the MIO card slot on the motherboard and align the golden fingers of the audio card with the MIO card slot. 2. Insert the audio card into the MIO slot on the motherboard. Ensure that it is completely seated on the card slot. 3. Secure the audio card to the
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 41
    and unplug the power cable before removing or plugging in any motherboard component. The illustration below shows the location of the onboard LED ASUS ASMB8 Management card. • Everytime after the AC power is replugged, you have to wait for about 60 seconds for the system to power up. ASUS P10S-E/4L
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 42
    ) The CPU warning LED lights up to indicate that a CPU error or failure has occurred. The warning LED functions only when you install the ASUS ASMB8 Management card. 4. Message LED (MLED1) The Message LED is an onboard LED that lights up to indicate an abnormal event occurrence. 2-22 Chapter
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 43
    5. CATT ERR LED (CATTERR1) The CATT ERR LED indicates that the system has experienced a fatal or catastrophic error and cannot continue to operate. ASUS P10S-E/4L 2-23
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 44
    the cap back to pins 1-2. 3. Plug the power cord and turn ON the computer. 4. Hold down the key during the boot process and enter BIOS setup to reenter data. Except when clearing the RTC RAM, never remove the cap on CLRTC jumper default position. Removing the cap will cause system
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 45
    LAN_SW1-4) These jumpers allows you to enable or disable the onboard Intel® I210 Gigabit LAN controllers. Set to pins 1-2 to activate the Gigabit LAN feature. ASUS P10S-E/4L 2-25
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 46
    4. ME firmware force recovery setting (3-pin ME_RCVR1) This jumper allows you to force Intel Management Engine (ME) boot from recovery mode when ME become corrupted. 5. PCH_MFG1 setting (3-pin PCH_MFG1) This jumper allows you to update the BIOS ME block select. 2-26 Chapter 2: Hardware Information
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 47
    the DOM power setting. 7. Smart Ride Through (SmaRT) setting (3-pin SMART_PSU1) The server system has support for Smart Ride Through Throttling (SmaRT). This feature increases the reliability for a system operating reduces the power load during the AC line drop out event. ASUS P10S-E/4L 2-27
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 48
    2.8 Connectors 2.8.1 Rear panel connectors 1. PS/2 keyboard/mouse port (purple/green): This port is for a PS/2 keyboard or mouse. 2. RJ-45 port for iKVM: This RJ-45 port functions only when you install ASMB8 management card. 3. Video Graphics Adapter port: This port is for a VGA monitor or other
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 49
    MRC_TURN_AROUND MRC_CMP_OPT MRC_SAVE_MC_VALUES MRC_RESTORE_TRAINING MRC_RMT_TOOL MRC_WRITE_SR MRC_DIMM_RON MRC_RCVEN_TIMING_1D MRC_MR_FILL MRC_PWR_MTR MRC_DDR4_MAPPING MRC_WRITE_VOLTAGE_1D MRC_EARLY_RDMPR_TIMING_2D MRC_FORCE_OLTM MRC_MC_ACTIVATE (continued on the next page) ASUS P10S-E/4L 2-29
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 50
    reset IDE, AHCI Init. IDE, AHCI Init. IDE, AHCI Init. IDE, AHCI Init. Wait BMC ready(duration: 120 seconds). BIOS Setup Utility password verify BIOS Setup Utility start BIOS Setup Utility input wait Ready to boot event Legacy boot event APIC mode PIC mode 2-30 Chapter 2: Hardware Information
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 51
    in SATA mode, SATA connector 5 and 6 (SATA 6 Gbps_5-6) will be disabled. 2. Mini-SAS HD connector (SATA1234) This motherboard comes with a mini Serial Attached SCSI (SAS) HD connector, the storage technology that supports Serial ATA. The connector supports up to four devices. ASUS P10S-E/4L 2-31
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 52
    -1 pin USB1314; USB78) These connectors are for USB 2.0 ports. Connect the USB module cables to these connectors. These USB connectors comply with USB 2.0 specification that supports up to 480 Mbps connection speed. 2-32 Chapter 2: Hardware Information
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 53
    CPU_FAN1) The fan connectors support cooling fans. Connect the fan cables to the fan connectors on the motherboard, ensuring that the motherboard components. • These are not jumpers! DO NOT place jumper caps on the fan connectors! • All fans feature the ASUS Smart Fan technology. ASUS P10S-E/4L
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 54
    7. Serial General Purpose Input/Output connector (6-1 pin SGPIO1) The SGPIO 1 connector is used for the Intel Rapid Storage Technology Enterprise SGPIO interface that controls the LED pattern generation, device information, and general purpose data. 8. Serial port connectors (10-1 pin COM1/COM2)
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 55
    connector (14-1 pin TPM) This connector supports a TPM (Trusted Platform Module) system, which can securely store keys, digital certificates, passwords, and data. A TPM system also helps enhance network security, protects digital identities, and ensures platform integrity. ASUS P10S-E/4L 2-35
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 56
    11. SATA DOM power connector (4-pin PWR3) This 4-pin connector is for 5V power of a certain SATA DOM (Disk on Module) device when using an appropriate cable. • The SATA DOM power connector is for output power only. It has a maximum output current of 1A. • Ensure that the power of the SATA DOM device
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 57
    LEDs on the front panel. Connect the LAN LED cable to the backplane for LAN activity indication. 13. VGA connector (16-1 pin VGA_HDR1) This connector supports the VGA High Dynamic-Range interface. ASUS P10S-E/4L 2-37
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 58
    when configuring a system with more power-consuming devices. The system may become unstable or may not boot up if the power is inadequate. • This motherboard supports ATX2.0 PSU or later version. • Ensure that your PSU can provide at least the minimum power required by your system. 2-38 Chapter
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 59
    supports several BIOS settings. Pressing the power switch for more than four seconds while the system is ON turns the system OFF. 6. Reset button (2-pin RESET) This 2-pin connector is for the chassis-mounted reset button for system reboot without turning off the system power. ASUS P10S-E/4L
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 60
    16. Auxiliary panel connector (20-2 pin AUX_PANEL1) This connector is for additional front panel features including front panel SMB, locator LED and switch, chassis intrusion, and LAN LEDs. 1. Front panel SMB (6-1 pin FPSMB) These LEDs connect the front panel SMBus cable. 2. LAN activity LED (2-pin
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 61
    allows you to install an M.2 device. • This connector supports type 2242/2260/2280 devices on both PCI-E and SATA interface. • This connector only supports SATA RAID. • When the M.2 connector is operating in SATA from devices rather than tripping the individual control lines. ASUS P10S-E/4L 2-41
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 62
    19. Chassis intrusion connector (2-pin INTRUSION1) This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 63
    Chapter 3: Powering Up Chapter 3: Powering Up
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 64
    the power-on self-test or POST. While the tests are running, the BIOS beeps or additional messages appear on the screen. If you do not see anything . Chassis Intrusion. BIOS-image Crash Detected. 7. At power on, hold down the key to enter the BIOS Setup. Follow the instructions in Chapter 4.
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 65
    . 4. If necessary, key in comments. 5. Click OK. Using Windows® Server 2012: 1. Press ++. 2. Click on the Power icon on BIOS setting. Pressing the power switch for more than four seconds lets the system enter the soft-off mode regardless of the BIOS setting. ASUS P10S-E/4L 3-3
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 66
    3-4 Chapter 3: Powering Up
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 67
    Chapter 4: BIOS Setup Chapter 4: BIOS Setup
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 68
    disk drive in case you need to restore the BIOS in the future. Copy the original motherboard BIOS using the BUPDATER utility. 4.1.1 ASUS CrashFree BIOS 3 utility The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore the BIOS file when it fails or gets corrupted during the
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 69
    the Up/Down arrow keys to find the USB flash disk that contains the latest BIOS then press . 5. Press to switch to the Folder Info field. 6. Press the Up/Down arrow keys to find the BIOS file then press . 7. Reboot the system when the update process is done. ASUS P10S-E/4L 4-3
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 70
    BUPDATER utility: 1. Visit the ASUS website at www.asus.com and download the latest BIOS file for the motherboard. Save the BIOS file to a bootable USB flash disk drive. 2. Download the BUPDATER utility (BUPDATER.exe) from the ASUS support website at www.asus.com/support/ to the bootable USB flash
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 71
    shut down or reset the system while updating the BIOS to prevent system boot failure! The utility returns to the DOS prompt after the BIOS update process is completed. 4. Reboot the system from the hard disk drive. The BIOS update is finished! Please restart your system. C:\> ASUS P10S-E/4L 4-5
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 72
    setup program This motherboard supports a programmable firmware chip that you can update using the provided utility described in section 4.1 Managing and updating your BIOS. Use the BIOS Setup program when you are installing a motherboard, reconfiguring your system, or prompted to "Run Setup." This
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 73
    4.2.1 Menu items BIOS menu screen Menu bar Configuration Server Mgmt For changing the server mgmt settings Event Logs For changing the event log settings To select an item on the menu bar, press the right or left arrow key on the keyboard until the desired item is highlighted. ASUS P10S-E/4L
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 74
    The other items (Advanced, Security, Boot, Monitor, Tool, Save & Exit, Server Mgmt, and Event Logs) on the menu bar have their respective menu items. the bottom right corner of a menu screen are the navigation keys for the BIOS setup program. Use the navigation keys to select items in the menu and
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 75
    4.3 Main menu When you enter the BIOS Setup program, the Main menu screen appears. The Main menu provides you an overview of the basic system information, to set the system time to [hh/mm/ss]. hh = hour (numeric value) mm = minutes (numeric value) ss = seconds (numeric value) ASUS P10S-E/4L 4-9
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 76
    4.4 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. Take caution when changing the settings of the Advanced menu items. Incorrect field values can cause the system to malfunction. 4-10 Chapter 4: BIOS Setup
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 77
    or disable the BIOS support for security device. Configuration options: [Disable] [Enable] Device Select [Auto] Allows you to restrict support to selected device. Auto will support both devices. Configuration options: [TPM 1.2] [TPM 2.0] [Auto] 4.4.2 Chipset Configuration ASUS P10S-E/4L 4-11
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 78
    virtualization technology function on memory control hub. Configuration options: [Enabled] [Disabled] Above 4GB MMIO BIOS assignment [Disabled] Allows you to enable or disable above 4GB MemoryMappedIO BIOS assignment. When apeture size is set to 2048 MB, this is disabled automatically. Configuration
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 79
    Control [Disabled] This item is for the control of the Active State Power Management on SA side of the DMI link. Configuration options: [L1] [Disabled] ASUS P10S-E/4L 4-13
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 80
    [Auto] Allows you to power down unused lanes. When set to [Auto], Bios will power down unused lanes based on the max possible link width. Configuration options: [Disabled] [Auto] ASPM [Auto] Allows you to control ASPM support for the PEG 0. This has no effect if PEG is not the currently
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 81
    Auto] Allows you to power down unused lanes. When set to [Auto], Bios will power down unused lanes based on the max possible link width. Configuration options: [Disabled] [Auto] ASPM [Auto] Allows you to control ASPM support for the PEG 1. This has no effect if PEG is not the ASUS P10S-E/4L 4-15
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 82
    ] [2.25 GB] [2.5 GB] [2.75 GB] [3 GB] [3.25 GB] [3.5 GB] Memory Scrambler [Enabled] Set this item to enable or disable memory scrambler support. Configuration options: [Disabled] [Enabled] Memory Remap [Enabled] Allows you to enable or disable memory remap above 4GB. Configuration options: [Enabled
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 83
    [Enabled] Allows you to enable or disable the control of Active State Power Management on SA side of the DMI link. Configuration options: [Disabled] [Enabled] ASUS P10S-E/4L 4-17
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 84
    controller and root ports for faster enumeration. Configuration options: [Enabled] [Disabled] xDCI Support [Disabled] Allows you to enable or disable xDCI (USB OTG Device). Configuration options: the High Precision Event Timer. Configuration options: [Disabled] [Enabled] 4-18 Chapter 4: BIOS Setup
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 85
    Intel Server Platform Services Intel TXT Information ASUS P10S-E/4L 4-19
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 86
    Device] This allows you to prioritize between onboard and the first offboard video device found. Configuration options: [Onboard Device] [Offboard Device] SR-IOV Support [Disabled] If system has SR-IOV capable PCIe devices, this option allows you to enable or disable Single Root IO Virtualization
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 87
    PCIe slot opROM option PCIE6/PCIE5/PCIE4 Option ROM [Enabled] Allows you to enable or disable PCIE6/PCIE5/PCIE4 Option ROM. Configuration options: [Disabled] [Enabled] 4.4.3 Platform Configuration ASUS P10S-E/4L 4-21
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 88
    options: [Disabled] [Enabled] Port 60/64 Emulation [Enabled] This allows you to enable the I/O port 60h/64h emulation support. This should be enabled for the complete USB keyboard legacy support for non-USB aware OSes. Configuration options: [Disabled] [Enabled] 4-22 Chapter 4: BIOS Setup
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 89
    [Auto] This allows you to set the maximum time the device will take before it properly reports itself to the Host Controller. Configuration options: [Auto] [Manual] NVMe Configuration Onboard LAN Configuration This allows you to enable or disable the onboard LAN. ASUS P10S-E/4L 4-23
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 90
    =3F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;] [IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;] [IO=3E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;] [IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;] 4-24 Chapter 4: BIOS Setup
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 91
    choose the setting for Super IO device. Configuration options: [Standard Serial Port Mode] [IrDA Active pulse 1.6 uS] [IrDA Active pulse 3/16 bit time] [ASKIR Mode] ASUS P10S-E/4L 4-25
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 92
    host computer and the remote computer (which the user is using) will exchange data. Both computers should have the same or compatible settings. 4-26 Chapter 4: BIOS Setup
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 93
    allows you to set the number of rows and columns supported on the Legacy OS. Configuration options: [80x24] [ BIOS POST [Always Enable] This setting allows you to specify if BootLoader is selected then Legacy console redirection. Configuration options: [Always Enable] [BootLoader] ASUS P10S-E/4L
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 94
    to [Enabled]. Console Redirection Settings Out-of-Band Mgmt Port [COM1] Allows remote management of a Windows Server OS through a serial port. Configuration options: [COM1] [COM2] Terminal Type [VT-UTF8] Allows you options: [None] [Hardware RTS/CTS] [Software Xon/Xoff] 4-28 Chapter 4: BIOS Setup
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 95
    : [Disabled] [Enabled] Power On By PCIE [Disabled] This allows you to enable or diasble the PCIE devices to generate a wake event. Configuration options: [Disabled] [Enabled] ASUS P10S-E/4L 4-29
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 96
    [Enabled] This item functions only if there is a serial port (COM1) connector on a motherboard. Power On By RTC [Disabled] This item allows you to enable or disable RTC to [Disabled] [Enabled] WHEA Configuration WHEA Support [Enabled] Allows you to enable or disable the WHEA (Windows Hardware
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 97
    Configuration The items in this menu show the CPU-related information that the BIOS automatically detects. Some items may not appear if your CPU does not support the related functions. Navigate to the second page of the screen to to go back to the first item in the first page. ASUS P10S-E/4L 4-31
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 98
    or disable prefetching of adjacent cache lines. Configuration options: [Disabled] [Enabled] CPU AES [Enabled] Allows you to enable or disable the CPU Advance Encryption Standard instructions. Configuration options: [Disabled] [Enabled] 4-32 Chapter 4: BIOS Setup
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 99
    the BIOS will set before OS handoff. Configuration options: [Max Non-Turbo Performance] [Turbo Performance] HardWare P states (HWP) [Disabled] Allows you to enable or disable HWP support. current and temperature specification limit. Configuration options: [Disabled] [Enabled] ASUS P10S-E/4L 4-33
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 100
    ] C6] [C7] [C7s] [C8] [AUTO] CFG lock [Enabled] Allows you to configure MSR 0xE2[15], CFG lock bit. Configuration options: [Disabled] [Enabled] Intel TXT(LT) Support [Disabled] Allows you to enable or disable the Intel(R) TXT(LT
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 101
    options: [Enabled] [Disabled] SATA Mode Selection [AHCI] This allows you to choose how SATA controller(s) should operate. Configuration options: [AHCI] [RAID] Software Feature Mask Configuration ASUS P10S-E/4L 4-35
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 102
    ] [4 sec] [6 sec] [8 sec] RST Force Form [Disabled] Allows you to enable or disable Form for Intel Rapid Storage Technology. Configuration options: [Disabled] [Enabled] 4-36 Chapter 4: BIOS Setup
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 103
    DTIO Config. Configuration options: [Disabled] [Enabled] 4.4.6 Network Stack Configuration Network Stack [Disabled] Allows you to enable or isable UEFI Network Stack. Configuration options: [Disabled] [Enabled] ASUS P10S-E/4L 4-37
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 104
    [Enabled] This option allows you to enable or disable CSM Support. Configuration options: [Disabled] [Enabled] GateA20 Active [Upon Request] This allows you to set the GA20 option. [Upon Request] GA20 can be disabled using BIOS services. [Always] Do not allow disabling GA20; this option is
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 105
    the OpROM execution policy for devices other than Network, Storage, or Video. Configuration options: [UEFI ] [Legacy] 4.4.8 iSCSI Configuration Allows you to configure the iSCSI parameters. ASUS P10S-E/4L 4-39
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 106
    the Administrator Password, follow the same steps as in changing an Administrator Password, but press when prompted to create/confirm the password. 4-40 Chapter 4: BIOS Setup
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 107
    item allows you to select the mode of the Secure Boot to change Image Execution policy and manage Secure Boot Keys. Configuration options: [Standard] [Custom] ASUS P10S-E/4L 4-41
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 108
    the system boot options. Bootup NumLock State [On] Allows you to select the power-on state for the NumLock. Configuration options: [On] [Off] 4-42 Chapter 4: BIOS Setup
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 109
    number of devices installed in the system. • To select the boot device during system startup, press when ASUS Logo appears. • To access Windows OS in Safe Mode, please press after POST. Boot Option #1-2 [IBA allow you to set the booting order of the SATA devices. ASUS P10S-E/4L 4-43
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 110
    the fan settings. Fan Speed Control [Generic Mode] Allows you to configure the ASUS Smart Fan feature that smartly adjusts the fan speeds for more efficient system operation. to display the submenu. ASUS EZ Flash Allows you to run the Start EzFlash utility. For more information, see section
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 111
    Save & Exit menu The Exit menu items allow you to save or discard your changes to the BIOS items. Pressing does not immediately exit this menu. Select one of the options from this to launch EFI Shell application (Shell.efi) from one of the available filesystem devices. ASUS P10S-E/4L 4-45
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 112
    Mgmt menu The Server Management menu displays the server management status and allows you to change the settings. OS Watchdog Timer [Disabled] This item allows you to start a BIOS timer which can only be shut off by Management Software after the OS loads. Configuration options: [Enabled] [Disabled
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 113
    . Configuration options: [Disabled] [Both] [Error code] [Progress code] BMC network configuration The sub-items in this configuration allow you to configure the BMC network parameters. ASUS P10S-E/4L 4-47
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 114
    State] This item allows you to configure LAN channel parameters statistically or dynamically (by BIOS or BMC). Previous State option will not modify any BMC network parameters during BIOS phase. Configuration options: [Previous State] [Static] [DynamicBmcDhcp] View System Event Log This item allows
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 115
    reset] When Log is Full [Do Nothing] Allows you to choose options for reactions to a full Smbios Event Log. Configuration options: [Do Nothing] [Erase Immediately] ASUS P10S-E/4L 4-49
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 116
    to enable or disable the converting of EFI Status Codes to Standard Smbios Types (not all may be translated). Configuration options: [Disabled] [Enabled] 4-50 Chapter 4: BIOS Setup
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 117
    Chapter 5: RAID Configuration Chapter 5: RAID Configuration
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 118
    5.1 Setting up RAID The motherboard comes with the Intel® C236 controller that supports Intel® Rapid Storage Technology enterprise Option ROM Utility with RAID 0, RAID 1, RAID 10, and RAID 5 support (for Windows® OS only). 5.1.1 RAID definitions RAID 0 (Data striping) optimizes two identical hard
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 119
    instructions in the system user guide. 2. Connect a SATA signal cable to the signal connector at the back of each drive and to the SATA connector on the motherboard connectors supported by Intel® C236 chipset. To do this: 1. Enter the BIOS supported by the Intel® C236 chipset. ASUS P10S-E/4L 5-3
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 120
    Serial ATA hard disk drives that are connected to the Serial ATA connectors supported by the Southbridge. Before you proceed, ensure that you have installed the through the menus and select the menu options. The RAID BIOS setup screens shown in this section are for reference only and
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 121
    the selection bar then press to select a disk. A small triangle before the Port number marks the selected drive. Press when you are done. ASUS P10S-E/4L 5-5
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 122
    range from 4 KB to 128 KB. The following are typical values: RAID 0: 128KB RAID 10: 64KB RAID 5: 64KB We recommend a lower stripe size for server systems, and a higher stripe size for multimedia computer systems used mainly for audio and video editing. 7. In the Capacity field item, key in the RAID
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 123
    VERIFICATION ] ALL DATA IN THE VOLUME WILL BE LOST! (This does not apply to Recovery volumes) Are you sure you want to delete volume "Volume0"? (Y/N): ASUS P10S-E/4L 5-7
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 124
    5.2.3 Resetting disks to Non-RAID Take caution before you reset a RAID volume hard disk drive to non-RAID. Resetting a RAID volume hard disk drive deletes all internal RAID structure on the drive. To reset a RAID set: 1. From the utility main menu, select 3. Reset Disks to Non-RAID and press <
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 125
    Model Serial # Size X XXXXXXXXXXX XXXXXXXX XXX.GB [ ]-Previous/Next [ENTER]-Select [ESC]-Exit Select a destination disk with the same size as the original hard disk. ASUS P10S-E/4L 5-9
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 126
    3. The utility immediately starts rebuilding after the disk is selected. When done, the status of the degraded RAID volume is changed to "Rebuild". Intel(R) Rapid Storage Technology enterprise - SATA Option ROM - 4.5.0.1012 Copyright(C) 2003-15 Intel Corporation. All Rights Reserved. [ MAIN MENU ]
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 127
    bootable to boot from the hard disk. 1. Reboot the system and press to enter the BIOS setup utility during POST. 2. Go to the Boot menu and select the boot option priority. 3. , then press . 5. When the confirmation window appears, select Yes, then press . ASUS P10S-E/4L 5-11
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 128
    disk drives that are connected to the Serial ATA connectors supported by the Southbridge. You need to manually install the Intel® Rapid Storage Technology enterprise utility on a Windows® operating system. Please refer to the installation instructions in Chapter 6. To enter the Intel® Rapid Storage
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 129
    data on one of the selected disks, select NO when prompted. • If you want to Enable volume write-back cache or Initialize volume, click Advanced. ASUS P10S-E/4L 5-13
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 130
    5. Confirm the volume creation, then click Create Volume to continue. This process could take a while depending on the number and size of the disks. You can continue using other applications during this time. 6. Wait until the process is completed, then click OK when prompted. You still need to
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 131
    values range from 4 KB to 128 KB. The following are typical values: RAID 0: 128KB RAID 10: 64KB RAID 5: 64KB We recommend a lower stripe size for server systems, and a higher stripe size for multimedia computer systems used mainly for audio and video editing. ASUS P10S-E/4L 5-15
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 132
    5.3.3 Deleting a volume Be cautious when deleting a volume. You will lose all data on the hard disk drives. Before you proceed, ensure that you back up all your important data from your hard drives. To delete a volume: 1. From the Volumes field in the utility main menu, select the volume that you
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 133
    , or errors here. E-Mail Preferences Allow you to set to sent e-mail of the following events: • Storage system information • Storage system warnings • Storage system errors ASUS P10S-E/4L 5-17
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 134
    5-18 Chapter 5: RAID Configuration
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 135
    Chapter 6: Driver Installation Chapter 6: Driver Installation
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 136
    a RAID driver disk in DOS (using the Makedisk application in the support DVD). To create a RAID driver disk in DOS environment: 1. Place the motherboard support DVD in the optical drive. 2. Restart your computer. 3. Enter the BIOS Setup. 4. Select the optical drive as the first boot priority to
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 137
    RAID driver disk in Windows® environment: 1. Start Windows®. 2. Place the motherboard support DVD into the optical drive. 3. Go to the Make disk menu, Follow succeeding screen instructions to complete the process. Write-protect the floppy disk to avoid computer virus infection. ASUS P10S-E/4L 6-3
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 138
    OS installation To install the RAID controller driver when installing Windows® Server 2008 OS: 1. Boot the computer using the Windows® Server 2008 OS installation disc. Follow the screen instructions to start installing Windows Server 2008. 2. When prompted to choose a type of installation, click
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 139
    you need from the list and click Next. 7. When the system finishes loading the RAID driver, replace the motherboard Support DVD with the Windows Server installation disc. Select the drive to install Windows and click Next. 8. Follow succeeding screen instructions to continue. ASUS P10S-E/4L 6-5
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 140
    features of your motherboard. 1. The contents of the support DVD are subject to change at any time without notice. Visit the ASUS website (www.asus.com) for the latest updates on software and utilities. 2. The support DVD is supported on Windows® Server 2008 R2 and Windows® Server 2012. 6.3 Running
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 141
    detects installed devices. Install the necessary drivers to activate the devices. 6.3.2 Utilities menu tab The Utilities menu displays the software applications and utilities that the motherboard supports. ASUS P10S-E/4L 6-7
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 142
    6.3.3 Manual menu tab You need an internet browser installed in your OS to view the User Guide. 6.3.4 Contact information menu The Contact menu displays the ASUS contact information, e-mail addresses, and useful links if you need more information or technical support for your motherboard. 6-8
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 143
    the file ASSETUP.EXE from the BIN folder. Double-click the ASSETUP.EXE to run the support DVD. 4. Click Intel® Chipset Device Software from the Drivers menu to start the installation. 5. The Intel(R) Chipset Device Software window appears. Click Next to start installation. ASUS P10S-E/4L 6-9
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 144
    6. Select Yes to accept the terms of the License Agreement and continue the process. 7. Read the Readme File Information and press Install to continue the installation. 6-10 Chapter 6: Driver Installation
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 145
    8. Press Restart Now to complete the setup process. ASUS P10S-E/4L 6-11
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 146
    provides the instructions on how to install the Intel® I210 Gigabits Adapter Driver on the system. To install the Intel® I210 Gigabit Adapters Driver on the Windows® operating system: 1. Restart the computer. 2. Log on with Administrator privileges. 3. Insert the motherboard/system support DVD to
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 147
    . 8. From the Setup Options window, click Next to start the installation. By default, Intel(R) PROSet for Windows Device Manager and Windows PowerShell Module are ticked. ASUS P10S-E/4L 6-13
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 148
    9. Click Install to start the installation. 10. When the installation is done, press Finish to complete the installation. 6-14 Chapter 6: Driver Installation
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 149
    the file ASSETUP.EXE from the BIN folder. Double-click the ASSETUP.EXE to run the support DVD. 4. From the Main Menu, click ASPEED AST1400/AST2400 Display Driver on the Drivers tab to start the installation. 5. From the installation window, click Next to start the installation. ASUS P10S-E/4L 6-15
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 150
    6. Click Install to proceed with the installation. 7. Click Finish to complete the installation. 6-16 Chapter 6: Driver Installation
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 151
    Appendix Appendix
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 152
    A.1 P10S-E/4L block diagram A-2 Appendix
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 153
    tam metni şu adreste bulunabilir: www.asus.com/support Bosanski ASUSTeK Computer Inc. ovim izjavljuje da je ovaj uređaj usklađen sa bitnim zahtjevima i ostalim odgovarajućim odredbama vezanih direktiva. Cijeli tekst EU izjave o usklađenosti dostupan je na: www.asus.com/support ASUS P10S-E/4L A-3
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 154
    +886-2-2894-3447 Fax +886-2-2890-7798 Web site https://www.asus.com Technical Support Telephone +86-21-38429911 Fax +86-21-58668722 ext: 9101 Online Support https://www.asus.com/support/Product/ContactUs/Services/ questionform/?lang=en ASUSTeK COMPUTER INC. (Taiwan) Address 4F, No. 150
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 155
    Czech Republic Telephone +420-596766888 Web site https://www.asus.com/cz/ Technical Support Telephone +420-596-766-891 Fax +420-596-766-329 E-mail [email protected] Online Support https://www.asus.com/support/Product/ContactUs/Services/ questionform/?lang=cs-cz ASUS P10S-E/4L A-5
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 156
    Web site Ul. Postępu 6, 02-676 Warszawa, Poland https://www.asus.com/pl/ Technical Support Telephone +48-225718033 Online Support https://www.asus.com/support/Product/ContactUs/Services/ questionform/?lang=pl-pl ASK-Service (Russia and CIS) Address 10 Telephone (495) 640-32-75 Web
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 157
    Part 2 Section 2. 1077(a) Responsible Party Name: Asus Computer International Address: 800 Corporate Way, Fremont, CA 94539. Phone/Fax No: (510)739-3777/(510)608-4555 hereby declares that the product Product Name : Server Model Number : P10S-E/4L, P10S-C/4L, P10S-C/4L/SYS Conforms to the following
  • Asus P10S-E/4L | P10S-E4L User Guide - Page 158
    A-8 Appendix
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
Motherboard
P10S-E/4L