Asus P10S-V/4L P10S-V4L User Guide

Asus P10S-V/4L Manual

Get Asus P10S-V/4L PDF manuals and user guides View all Asus P10S-V/4L manuals
Add to My Manuals
Save this manual to your list of manuals

Asus P10S-V/4L manual content summary:

  • Asus P10S-V/4L | P10S-V4L User Guide - Page 1
    P10S-V/4L Motherboard
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 2
    Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. ASUS PROVIDES THIS MANUAL "AS IS" WITHOUT WARRANTY
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 3
    ix Operation safety ix P10S-V/4L Specifications Summary xi Chapter highlights 1-3 1.4.2 Innovative ASUS features 1-4 Chapter 2: CPU 2-7 2.3.1 Installing the CPU 2-7 2.3.2 Installing the CPU heatsink 2-10 2.3.3 Uninstalling the CPU heatsink and fan 2-11 2.3.4 Installing the CPU
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 4
    the dual function power switch 3-3 Chapter 4: BIOS Setup 4.1 Managing and updating your BIOS 4-2 4.1.1 ASUS CrashFree BIOS 3 utility 4-2 4.1.2 ASUS EzFlash Utility 4-3 4.1.3 BUPDATER utility 4-4 4.2 BIOS setup program 4-6 4.2.1 BIOS menu screen 4-7 4.2.2 Menu bar 4-7 4.2.3 Menu
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 5
    4.4.2 Chipset Configuration 4-11 4.4.3 Platform Configuration 4-19 4.4.4 CPU Configuration 4-27 4.4.5 SATA Configuration 4-31 4.4.6 Network Stack Installing hard disk drives 5-3 5.1.3 Setting the RAID mode in BIOS 5-3 5.1.4 RAID configuration utilities 5-3 5.2 Intel® Rapid Storage
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 6
    Utilities menu tab 6-6 6.3.3 Manual menu 6-7 6.3.4 Contact information menu 6-7 6.3.5 Installing the Intel® Chipset device Software driver 6-8 6.4 Installing the Intel® I210 Gigabit Adapters driver 6-10 6.5 Installing the VGA driver 6-13 Appendix P10S-V/4L block diagram A-2 Simplified EU
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 7
    . This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer's instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 8
    updated warranties apply to all ASUS products, consistent with the Australian Consumer Law. For the latest product warranty details please visit https://www.asus. com/support. . If you require assistance please call ASUS Customer Service 1300 2787 88 or visit us at https://www.asus.com/support. viii
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 9
    service technician or your retailer. Operation safety • Before installing the motherboard and adding devices on it, carefully read all the manuals stable surface. • If you encounter technical problems with the product, contact a qualified service technician or your retailer. DO NOT throw the
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 10
    note of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task IMPORTANT: Instructions that you MUST follow to complete a task
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 11
    P10S-V/4L Specifications Summary Processor Support / System Bus 1 * Socket LGA1151 Intel® Xeon® processor /s ports - Intel® Rapid Storage Technology Enterprise (RSTe) supports software RAID 0, 1, 10, & 5 (Windows & Linux) Optional Kits: - ASUS PIKE II 3008 Series SAS 12G RAID card - ASUS PIKE
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 12
    USB 3.0 connector (Type A USB socket) 6 x 4 pin headers 1 4 4-pin power connector 1 1 1 2 x USB 3.0 2 x USB 2.0 1 4 x GbE LAN 1 Software ASWM Enterprise CPU Temperature FAN RPM Operation temperature: 10oC - 35oC (50oF - 95oF) Non operation temperature: -40oC - 70oC (-40oF - 158oF) Non operation
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 13
    Chapter 1: Product Introduction
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 14
    ASUS® P10S-V/4L motherboard! The motherboard delivers a host of new features and latest technologies, making it another standout in the long line of ASUS Box Pack Standard Bulk Pack I/O Shield Cables SATA 6G cable Support DVD Application CD ASWM Enterprise SDVD Accessory Metal Plate for LGA1151
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 15
    product, ASUS Technical Support team members can then offer a quicker and satisfying solution to your problems. P10S-V/4L xxS2xxxxxxxx Made ® E31200 v5 have improve CPU performance and integrated voltage regulators making it one of the most powerful and energy efficient CPU in the world. Intel®
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 16
    CPU resources by automatically adjusting the CPU voltage and core frequency depending on the CPU loading and system speed or power requirement. Serial ATA III technology The motherboard supports components. 1.4.2 Innovative ASUS features ASUS Fan Speed technology The ASUS Fan Speed technology smartly
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 17
    Chapter 2: Hardware Information
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 18
    2.1 Before you proceed Take note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before touching any component. • Use a grounded wrist strap or touch a safely grounded object or a metal object,
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 19
    the motherboard to the chassis. DO NOT overtighten the screws! Doing so can damage the motherboard. Place this side towards the rear of the chassis ASUS P10S-V/4L 2-3
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 20
    2.2.3 Motherboard layout 2-4 Chapter 2: Hardware Information
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 21
    2.2.4 Layout contents Slots/Sockets 1. CPU sockets 2. DDR4 sockets 3. PCI Express x16 / PCI Express x8 / PCI slot Page 2-7 2-13 2-17 Onboard LEDs 1. Standby Location LED 8. Power LED 9. USB 2.0 ports 1 and 2 Page 2-24 2-24 2-24 2-24 2-24 2-24 2-24 2-24 2-24 ASUS P10S-V/4L 2-5
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 22
    activity LED connector (4-pin HDLED1) 3.  USB 2.0 connector (10-1 pin USB78) 4. USB 3.0 connector (20-1 pin USB3_34, A-Type USB3_5) 5.  CPU, front, and rear fan connectors (4-pin FRNT_FAN1, REAR_FAN1, CPU_FAN1, FRNT_FAN2, FRNT_FAN3. FRNT_FAN4) 6. Serial General Purpose Input/Output connector
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 23
    CPU installation/removal, or misplacement/loss/incorrect removal of the PnP cap. 2.3.1 Installing the CPU To install the CPU: 1. Locate the CPU socket on the motherboard. Before installing the CPU, ensure that the socket box is facing toward you and the load lever is on your right. ASUS P10S-V/4L
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 24
    your thumb (A), then move it to the right (B) until it is released from the retention tab. Do not remove the PnP cap yet from the CPU socket. Doing so may bend the pins of the socket. 3. Lift the load lever until the load plate is completely lifted. Load lever Retention tab
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 25
    the retention tab to remove the PnP cap from the CPU socket. Load lever Retention tab 7. Apply some Thermal Interface Material to the exposed area of the CPU that the heatsink will be in contact with, ensuring skin, wash it off immediately and seek professional medical help. ASUS P10S-V/4L 2-9
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 26
    assembly is included depending on the package. If you buy a CPU separately, ensure that you use only Intel® certified multi‑directional CPU heatsink or CPU heatsink with CPU fan. • Use an LGA1151-compatible CPU heatsink and CPU fan assembly only. The LGA1151 socket is incompatible with the LGA775
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 27
    you fail to plug this connector. 2.3.3 Uninstalling the CPU heatsink and fan To uninstall the CPU heatsink and fan: 1. Disconnect the CPU fan cable from the connector on the motherboard. 2. motherboard. 4. Carefully remove the heatsink and fan assembly from the motherboard. ASUS P10S-V/4L 2-11
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 28
    and performance. • Ensure that you use qualified heatsink assembly only. • Ensure that you have applied the thermal interface material to the top of the CPU before installing the heatsink and fan. 1. Peel off the sticker on the heatsink metal plate and affix the plate to the back of the motherboard
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 29
    . For optimum compatibility, it is recommended that you obtain memory modules from the same vendor. • Start installing the DIMMs in slots A2 and B2 (Blue). ASUS P10S-V/4L 2-13
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 30
    in the motherboard package. • Refer to the user guide for qualified vendor lists of the memory modules. Removing a DIMM from a single clip DIMM socket 1. Press the retaining clip outward to unlock the DIMM. 2. Remove the DIMM from the socket. Support the DIMM lightly with your fingers when pressing
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 31
    software drivers for the expansion card. When using PCI cards on shared slots, ensure that the drivers support "Share IRQ" or that the cards do not need IRQ assignments. Otherwise, conflicts will arise between the two PCI groups, making the system unstable and the card inoperable. ASUS P10S-V/4L
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 32
    2.5.3 Interrupt assignments Standard Interrupt assignments IRQ Priority Standard function 0 1 System Timer 1 2 Keyboard Controller 2 - Programmable Interrupt 3* - -- 4* 9 Communications Port (COM1) 5* 10 Print Port (LPT1) 6 - -- 7* - -- 8 3 System CMOS/Real Time Clock
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 33
    CPU. This slot supports VGA cards and various server class high performance add-on cards. 2.5.5 PCI Express x8 slot (x4 link) The onboard PCIE 5 provide one x4 Gen3 link to the PCH. These slots support (x16 Gen3 link) 1 x PCI-E x8 (x4 Gen3 link) 1 x PCI 1 x PCI 1 x PCI 1 x PCI ASUS P10S-V/4L 2-17
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 34
    2.5.7 Installing the Audio card 1. Locate the MIO card slot on the motherboard and align the golden fingers of the audio card with the MIO card slot. 2. Insert the audio card into the MIO slot on the motherboard. Ensure that it is completely seated on the card slot. 3. Secure the audio card to the
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 35
    the location of the onboard LED. 2. Power LED (PLED1) This LED lights up when the Power-on button is pressed and the system is on. ASUS P10S-V/4L 2-19
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 36
    3. Location LED (LOCLED1) The Location LED is an onboard LED that lights up when the Location Button on the front panel is pressed. This LED helps you visually locate the server among other servers especially when you are located at the back of the server rack. 4. CATT ERR LED (CATTERR1) The CATT
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 37
    power cord and turn ON the computer. 4. Hold down the key during the boot process and enter BIOS setup to reenter data. Except when clearing the RTC RAM, never remove the cap on CLRTC jumper default position. or unplug and plug the power cord before rebooting the system. ASUS P10S-V/4L 2-21
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 38
    2. VGA controller setting (3-pin VGA_SW1) This jumper allows you to enable or disable the onboard VGA controller. Set to pins 1-2 to activate the VGA feature. 3. LAN controller setting (3-pin LAN_SW1, LAN_SW2, LAN_SW3, LAN_SW4) These jumpers allows you to enable or disable the onboard Intel® I210
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 39
    4. ME firmware force recovery setting (3-pin ME_RCVR1) This jumper allows you to force Intel Management Engine (ME) boot from recovery mode when ME become corrupted. ASUS P10S-V/4L 2-23
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 40
    2.8 Connectors 2.8.1 Rear panel connectors 1. PS/2 keyboard/mouse port (purple/green). This port is for a PS/2 keyboard or mouse. 2. USB 3.0 ports 1 and 2. These two 4-pin USB ports are available for connecting USB 3.0 devices. 3. Serial port (COM1). This 9-pin communication port is for pointing
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 41
    for PEI phase(CACHE_ENABLED_POST_CODE) Establish Stack CPU Early init.(CPU_EARLY_INIT_POST_CODE) PEI Core Entry PEI cache as ram CPU initial NB initialize before installed memory SB MRC_EARLY_RDMPR_TIMING_2D MRC_FORCE_OLTM MRC_MC_ACTIVATE (continued on the next page) ASUS P10S-V/4L 2-25
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 42
    DXE CPU Init Driver Init. AMI USB Driver Init. AMI USB Driver Init. Legacy Option ROM Init. Reset system USB hotplug NVRAM clean up NVRAM configuration reset IDE, AHCI Init. IDE, AHCI Init. IDE, AHCI Init. IDE, AHCI Init. Wait BMC ready(duration: 120 seconds). BIOS Setup Utility password verify BIOS
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 43
    1. Serial ATA 6.0 Gbps connectors (7-pin SATA 6Gbps_1-8 connector [Light Blue]) Supported by the Intel® C236 chipset, these connectors are for the Serial ATA signal cables configuration. The actual data transfer rate depends on the speed of Serial ATA hard disks installed. ASUS P10S-V/4L 2-27
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 44
    (10-1 pin USB78) These connectors are for USB 2.0 ports. Connect the USB module cables to these connectors. These USB connectors comply with USB 2.0 specification that supports up to 480 Mbps connection speed. 2-28 Chapter 2: Hardware Information
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 45
    compatibility with USB 2.0. 5. CPU, front, and rear fan connectors (4-pin FRNT_FAN1, REAR_FAN1, CPU_FAN1, FRNT_FAN2, FRNT_FAN3, FRNT_ FAN4) The fan connectors support cooling fans. Connect the jumper caps on the fan connectors! • All fans feature the ASUS Smart Fan technology. ASUS P10S-V/4L 2-29
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 46
    controls the LED pattern generation, device information, and general purpose data. 7. Trusted Platform Module connector (14-1 pin TPM) This connector supports a Trusted Platform Module (TPM) system, which can securely store keys, digital certificates, passwords, and data. A TPM system also helps
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 47
    8. VGA connector (16-1 pin VGA_HDR1) This connector supports the VGA High Dynamic-Range interface. 9. SATA DOM power connector (4-pin PWR3) This 4-pin connector is for 5V power of current of 1A. • Ensure that the power of the SATA DOM device that you will use is less than 1A. ASUS P10S-V/4L 2-31
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 48
    a system with more power-consuming devices. The system may become unstable or may not boot up if the power is inadequate. • This motherboard supports ATX2.0 PSU or later version. • Ensure that your PSU can provide at least the minimum power required by your system. 2-32 Chapter 2: Hardware
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 49
    supports several BIOS settings. Pressing the power switch for more than four seconds while the system is ON turns the system OFF. 6. Reset button (2-pin RESET) This 2-pin connector is for the chassis-mounted reset button for system reboot without turning off the system power. ASUS P10S-V/4L
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 50
    12. Auxiliary panel connector (20-2 pin AUX_PANEL1) This connector is for additional front panel features including front panel SMB, locator LED and switch, chassis intrusion, and LAN LEDs. 1. Front panel SMB (6-1 pin FPSMB) These LEDs connect the front panel SMBus cable. 2. LAN activity LED (2-pin
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 51
    LAN34_LED1) These LEDs are for Gigabit LAN activity LEDs on the front panel. Connect the LAN LED cable to the backplane for LAN activity indication. ASUS P10S-V/4L 2-35
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 52
    15. LPT connector (26-1 pin LPT1) The LPT (Line Printing Terminal) connector supports devices such as a printer. LPT standardizes as IEEE 1284, which is the parallel port interface on IBM PC-compatible computers. 16. System Management Bus (SMBUS)
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 53
    Chapter 3: Powering Up
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 54
    the power-on self-test or POST. While the tests are running, the BIOS beeps or additional messages appear on the screen. If you do not see anything . Chassis Intrusion. BIOS-image Crash Detected. 7. At power on, hold down the key to enter the BIOS Setup. Follow the instructions in Chapter 4.
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 55
    ON, press the power switch for less than four seconds to put the system to sleep mode or to soft-off mode, depending on the BIOS setting. Pressing the power switch for more than four seconds lets the system enter the soft-off mode regardless of the BIOS setting. ASUS P10S-V/4L 3-3
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 56
    3-4 Chapter 3: Powering Up
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 57
    Chapter 4: BIOS Setup
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 58
    the motherboard Basic Input/Output System (BIOS) setup: 1. ASUS CrashFree BIOS 3 To recover the BIOS using a bootable USB flash disk drive when the BIOS file fails or gets corrupted. 2. ASUS EzFlash Updates the BIOS using a USB flash disk. 3. BUPDATER Updates the BIOS in DOS mode using a bootable
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 59
    the Up/Down arrow keys to find the USB flash disk that contains the latest BIOS then press . 5. Press to switch to the Folder Info field. 6. Press the Up/Down arrow keys to find the BIOS file then press . 7. Reboot the system when the update process is done. ASUS P10S-V/4L 4-3
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 60
    . Updating the BIOS file To update the BIOS file using the BUPDATER utility: 1. Visit the ASUS website at www.asus.com and download the latest BIOS file for the motherboard. Save the BIOS file to a bootable USB flash disk drive. 2. Download the BUPDATER utility (BUPDATER.exe) from the ASUS support
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 61
    shut down or reset the system while updating the BIOS to prevent system boot failure! The utility returns to the DOS prompt after the BIOS update process is completed. 4. Reboot the system from the hard disk drive. The BIOS update is finished! Please restart your system. C:\> ASUS P10S-V/4L 4-5
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 62
    setup program This motherboard supports a programmable firmware chip that you can update using the provided utility described in section 4.1 Managing and updating your BIOS. Use the BIOS Setup program when you are installing a motherboard, reconfiguring your system, or prompted to "Run Setup." This
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 63
    4.2.1 BIOS menu screen Menu items Menu bar Configuration fields General help 4.2.2 Menu bar Navigation keys The menu bar on top of the screen has the To select an item on the menu bar, press the right or left arrow key on the keyboard until the desired item is highlighted. ASUS P10S-V/4L 4-7
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 64
    display the submenu, select the item and press . 4.2.5 Navigation keys At the bottom right corner of a menu screen are the navigation keys for the BIOS setup program. Use the navigation keys to select items in the menu and change the settings. 4.2.6 General help At the top right corner of the
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 65
    4.3 Main menu When you enter the BIOS Setup program, the Main menu screen appears. The Main menu provides you an overview of the basic system information, and allows Day xx/xx/xxxx] Allows you to set the system date. 4.3.2 System Time [xx:xx:xx] Allows you to set the system time. ASUS P10S-V/4L 4-9
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 66
    4.4 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. Take caution when changing the settings of the Advanced menu items. Incorrect field values can cause the system to malfunction. 4-10 Chapter 4: BIOS Setup
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 67
    disable the BIOS support for security device. Configuration options: [Disabled] [Enabled] Device Select [Auto] Allows you to restrict support to selected device. Auto will support both devices technology function on memory control hub. Configuration options: [Enabled] [Disabled] ASUS P10S-V/4L 4-11
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 68
    [Disabled] Allows you to enable or disable above 4GB MemoryMappedIO BIOS assignment. When aperture size is set to 2048 MB, this is disabled automatically. Configuration options: [Enabled] Management on SA side of the DMI link. Configuration options: [Disabled] [L1] 4-12 Chapter 4: BIOS Setup
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 69
    Allows you to power down unused lanes. [Disabled] No power saving [Auto] BIOS will power down unused lanes based in the max possible link width De-emphasis Control [-3.5 dB] Allows you to configure the De-emphasis control on PEG. Configuration options: [-6 dB] [-3.5 dB] ASUS P10S-V/4L 4-13
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 70
    Configuration options: [Disabled] [Enabled] LTR [Enabled] Allows you to enable or disable the CPU PEG (0,1,0) Latency Reporting. Configuration options: [Disabled] [Enabled] PEG0 Max Payload size [Auto] 1333] [1400] [1600] [1800] [1867] [2000] [2133] [2200] [2400] [2600] 4-14 Chapter 4: BIOS Setup
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 71
    memory scrambler support. Configuration options: [Enabled] [Disabled] Memory Remap [Enabled] Allows you to enable or disable memory remap above 4GB. Configuration options: [Enabled] [Disabled] PCH-IO Configuration Allows you to set PCH-IO parameters. PCI Express Configuration ASUS P10S-V/4L 4-15
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 72
    controller and root ports for faster enumeration. Configuration options: [Enabled] [Disabled] xDCI Support [Disabled] Allows you to enable or disable xDCI (USB OTG Device). Configuration options: the High Precision Event Timer. Configuration options: [Disabled] [Enabled] 4-16 Chapter 4: BIOS Setup
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 73
    Intel Server Platform Services Intel TXT Information ASUS P10S-V/4L 4-17
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 74
    slot opROM option PCIE5/ PCIE6 Option ROM [Enabled] Allows you to enable or disable the PCIE5 / PCIE6 Option ROM. Configuration options: [Disabled] [Enabled] 4-18 Chapter 4: BIOS Setup
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 75
    to [Disabled] by default for the EHCI (enhanced host controller interface) support by XHCI drivers in operating systems. [Disabled] [Enabled] Support XHCI by XHCI drivers for operating systems with XHCI support. Support XHCI by BIOS for operating systems without XHCI support. ASUS P10S-V/4L 4-19
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 76
    driver support. Configuration options: [Disabled] [Enabled] Port 60/64 Emulation [Enabled] This allows you to enable the I/O port 60h/64h emulation support. This should be enabled for the complete USB keyboard legacy support . Configuration options: [Auto] [Manual] Mass Storage Devices Allows you
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 77
    options: [Disabled] [Enabled] Intel LAN ROM Type [Disabled] Allows you to select the Intel LAN ROM type. Configuration options: [Disabled] [PXE] [iSCSI] Super IO Configuration ASUS P10S-V/4L 4-21
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 78
    host computer and the remote computer (which the user is using) will exchange data. Both computers should have the same or compatible settings. 4-22 Chapter 4: BIOS Setup
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 79
    UTF8] Allows you to set the terminal type. [VT100] ASCII char set. [VT100+] Extends VT100 to support color, function keys, et. [VT-UTF8] Uses UTF8 encoding to map Unicode chars onto 1 or more to send start/stop signals. Configuration options: [None] [Hardware RTS/CTS] ASUS P10S-V/4L 4-23
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 80
    you to set the number of rows and columns supported on the Legacy OS. Configuration options: [80x24] ] [SCO] [ESCN] [VT400] Redirection After BIOS POST [Always Enable] Allows you to specify if Out-of-Band Management/ Windows Emergency Management Services (EMS) Console Redirection [Disabled] Allows
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 81
    to select the highest ACPI sleep state the system will enter when the SUSPEND button is pressed. Configuration options: [Suspend Disabled] [S3 (Suspend to RAM)] ASUS P10S-V/4L 4-25
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 82
    values. SMART Settings SMART Self Test [Enabled] Allows you to run SMART Self Test on all HDDs during POST. Configuration options: [Disabled] [Enabled] 4-26 Chapter 4: BIOS Setup
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 83
    support. Configuration options: [Disabled] [Enabled] 4.4.4 CPU Configuration The items in this menu show the CPU-related information that the BIOS automatically detects. Some items may not appear if your CPU does not support button to go back to the first item in the first page. ASUS P10S-V/4L 4-27
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 84
    enable or disable prefetching of adjacent cache lines. Configuration options: [Disabled] [Enabled] CPU AES [Enabled] Allows you to enable or disable the CPU Advance Encryption Standard instructions. Configuration options: [Disabled] [Enabled] Boot performance mode [Turbo Performance] Allows you to
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 85
    items appear only when you set the CPU C states to [Enabled]. Enhanced C-States [Enabled] This item allows you to enable or disable C1E. When [Enabled] is selected, CPU will switch to minimum speed when all cores enter C-State. Configuration options: [Disabled] [Enabled] ASUS P10S-V/4L 4-29
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 86
    ] C6] [C7] [C7s] [C8] [AUTO] CFG lock [Enabled] Allows you to configure MSR 0xE2[15], CFG lock bit. Configuration options: [Disabled] [Enabled] Intel TXT(LT) Support [Disabled] Allows you to enable or disable the Intel(R) TXT(LT
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 87
    storage driver to enable advanced Serial ATA features that increases storage performance on random workloads by allowing the drive to internally optimize the order of commands. [RAID] Set to [RAID] when you want to create a RAID configuration from the SATA hard disk drives. ASUS P10S-V/4L
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 88
    on eSATA [Enabled] [Disabled] [Enabled] Any RAID volume can span internal and eSATA drives. Only IRRT volumes can span internal and eSATA drives. 4-32 Chapter 4: BIOS Setup
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 89
    you to enable or d isable UEFI Network Stack. Configuration options: [Disabled] [Enabled] The following items appear only when you set the Network Stack to [Enabled]. ASUS P10S-V/4L 4-33
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 90
    not be created. Configuration options: [Disable] [Enable] Ipv6 PXE Support [Enabled] Enables or disables the Ipv6 PXE Boot Support. If disabled, Ipv6 PXE boot option will not be created. range from 1 to 50. 4.4.7 CSM Configuration CSM Support [Enabled] This option allows you to enable or disable CSM
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 91
    GA20 can be disabled using BIOS services. [Always] Do not allow disabling GA20; this option is useful when any RT code is executed above 1MB Option ROM Messages [Force BIOS] This allows you to [Legacy] 4.4.8 iSCSI Configuration Allows you to configure the iSCSi parameters. ASUS P10S-V/4L 4-35
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 92
    the administrator password, follow the same steps as in changing an administrator password, but press when prompted to create/confirm the password. 4-36 Chapter 4: BIOS Setup
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 93
    ] This item allows you to select the mode of the Secure boot to change Execution policy and Secure Boot Key management. Configuration options: [Standard] [Custom] ASUS P10S-V/4L 4-37
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 94
    the system boot options. Bootup NumLock State [On] Allows you to select the power-on state for the NumLock. Configuration options: [Off] [On] 4-38 Chapter 4: BIOS Setup
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 95
    the number of devices installed in the system. • To select the boot device during system startup, press when ASUS Logo appears. • To access Windows OS in Safe Mode, please press after POST. Set the booting order you to set the booting order of the SATA devices. ASUS P10S-V/4L 4-39
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 96
    Tool menu The Tool menu items allow you to configure options for special functions. Select an item then press to display the submenu. ASUS EZ Flash Allows you to run ASUS EZ Flash BIOS ROM Utility when you press . Refer to the ASUS EZ Flash Utility section for details. 4-40 Chapter
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 97
    Save & Exit menu The Exit menu items allow you to save or discard your changes to the BIOS items. Pressing does not immediately exit this menu. Select one of the options from this to launch EFI Shell application (Shell.efi) from one of the available filesystem devices. ASUS P10S-V/4L 4-41
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 98
    erasing Smbios Event Log. Erasing is done prior to any logging activation during reset. Configuration options: [No] [Yes, Next reset] [Yes, Every reset] 4-42 Chapter 4: BIOS Setup
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 99
    the number of occurences of a duplicate event that must pass before the multiple-event counter of log entry is updated. Use the and keys to adjust the value. Configuration options: [1] - [255] METW [60] all may be translated). Configuration options: [Disabled] [Enabled] ASUS P10S-V/4L 4-43
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 100
    4-44 Chapter 4: BIOS Setup
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 101
    Chapter 5: RAID Configuration
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 102
    ROM Utility with RAID 0, RAID 1, RAID 10, and RAID 5 support (for both Windows® OS and Linux). 5.1.1 RAID definitions RAID 0 hard disk drive included in a created RAID set, copy first the RAID driver from the support DVD to a floppy disk before you install an operating system to the selected
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 103
    disks into the drive bays following the instructions in the system user guide. 2. Connect a SATA signal cable to drives attached to the SATA connectors supported by Intel® C236 chipset. To do this: 1. Enter the BIOS Setup during POST. 2. Go supported by the Intel® C236 chipset. ASUS P10S-V/4L 5-3
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 104
    Serial ATA hard disk drives that are connected to the Serial ATA connectors supported by the Southbridge. Before you proceed, ensure that you have installed the through the menus and select the menu options. The RAID BIOS setup screens shown in this section are for reference only and
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 105
    the selection bar then press to select a disk. A small triangle before the Port number marks the selected drive. Press when you are done. ASUS P10S-V/4L 5-5
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 106
    6. Use the up/down arrow keys to select the stripe size for the RAID array (for RAID 0, 10 and 5 only) then press . The available stripe size values range from 4 KB to 128 KB. The following are typical values: RAID 0: 128KB RAID 10: 64KB RAID 5: 64KB We recommend a lower stripe size for
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 107
    VERIFICATION ] ALL DATA IN THE VOLUME WILL BE LOST! (This does not apply to Recovery volumes) Are you sure you want to delete volume "Volume0"? (Y/N): ASUS P10S-V/4L 5-7
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 108
    5.2.3 Resetting disks to Non-RAID Take caution before you reset a RAID volume hard disk drive to non-RAID. Resetting a RAID volume hard disk drive deletes all internal RAID structure on the drive. To reset a RAID set: 1. From the utility main menu, select 3. Reset Disks to Non-RAID and press <
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 109
    Model Serial # Size X XXXXXXXXXXX XXXXXXXX XXX.GB [ ]-Previous/Next [ENTER]-Select [ESC]-Exit Select a destination disk with the same size as the original hard disk. ASUS P10S-V/4L 5-9
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 110
    3. The utility immediately starts rebuilding after the disk is selected. When done, the status of the degraded RAID volume is changed to "Rebuild". Intel(R) Rapid Storage Technology enterprise - SATA Option ROM - 4.5.0.1012 Copyright(C) 2003-15 Intel Corporation. All Rights Reserved. [ MAIN MENU ]
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 111
    bootable to boot from the hard disk. 1. Reboot the system and press to enter the BIOS setup utility during POST. 2. Go to the Boot menu and select the boot option priority. 3. , then press . 5. When the confirmation window appears, select Yes, then press . ASUS P10S-V/4L 5-11
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 112
    disk drives that are connected to the Serial ATA connectors supported by the Southbridge. You need to manually install the Intel® Rapid Storage Technology enterprise utility on a Windows® operating system. Please refer to the installation instructions in Chapter 6. To enter the Intel® Rapid Storage
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 113
    data on one of the selected disks, select NO when prompted. • If you want to Enable volume write-back cache or Initialize volume, click Advanced. ASUS P10S-V/4L 5-13
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 114
    5. Confirm the volume creation, then click Create Volume to continue. This process could take a while depending on the number and size of the disks. You can continue using other applications during this time. 6. Wait until the process is completed, then click OK when prompted. You still need to
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 115
    RAID 5: 64KB We recommend a lower stripe size for server systems, and a higher stripe size for multimedia computer systems used mainly for audio and video editing. ASUS P10S-V/4L 5-15
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 116
    5.3.3 Deleting a volume Be cautious when deleting a volume. You will lose all data on the hard disk drives. Before you proceed, ensure that you back up all your important data from your hard drives. To delete a volume: 1. From the Volumes field in the utility main menu, select the volume that you
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 117
    , or errors here. E-Mail Preferences Allow you to set to sent e-mail of the following events: • Storage system information • Storage system warnings • Storage system errors ASUS P10S-V/4L 5-17
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 118
    5-18 Chapter 5: RAID Configuration
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 119
    Chapter 6: Driver Installation
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 120
    hard disk drive or bootable array. This part provides the instructions on how to install the RAID controller drivers during OS installation. 6.1.1 Creating a USB flash drive with RAID driver When installing Windows® Server OS, you can load the RAID driver from a USB flash drive. You can create a USB
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 121
    a USB flash drive containing the RAID controller driver. Click Browse to continue. 5. Locate the driver in the corresponding folder of the Support DVD or USB flash drive and then click OK to continue. 6. Select the RAID controller driver you need from the list and click Next. ASUS P10S-V/4L 6-3
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 122
    the system finishes loading the RAID driver, • Replace the motherboard Support DVD with the Windows Server installation disc. • Remove the USB flash drive. Select the drive to install Windows and click Next. 8. Follow succeeding screen instructions to continue. 6-4 Chapter 6: Driver Installation
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 123
    to run the support DVD. The main screen of the Support DVD contains the following tabs: 1. Drivers 2. Utilities 3. Manual 4. Contact The main screen of the Support DVD looks exactly the same on the Windows® Server 2008 R2 and on the Windows® Server 2012 Operating System (OS). ASUS P10S-V/4L 6-5
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 124
    tab The Drivers Menu shows the available device drivers if the system detects installed devices. Install the necessary drivers to activate the devices. 6.3.2 Utilities menu tab The Utilities menu displays the software applications and utilities that the motherboard supports. 6-6 Chapter 6: Driver
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 125
    4L user guide. You need an internet browser installed in your OS to view the User Guide. 6.3.4 Contact information menu The Contact menu displays the ASUS contact information, e-mail addresses, and useful links if you need more information or technical support for your motherboard. ASUS P10S-V/4L
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 126
    Software driver This section provides the instructions on how to install the Intel® chipset device software on the system. You need to manually privileges. 3. Insert the Motherboard Support DVD to the optical drive. The support DVD automatically displays the Drivers menu if Autorun is enabled in
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 127
    6. Select Yes to accept the terms of the License Agreement and continue the process. 7. Read the Readme File Information and press Next to continue the installation. 8. Toggle Yes, I want to restart the computer now and click Finish to complete the setup process. ASUS P10S-V/4L 6-9
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 128
    provides the instructions on how to install the Intel® I210 Gigabits Adapter Driver on the system. To install the Intel® I210 Gigabit Adapters Driver on the Windows® operating system: 1. Restart the computer. 2. Log on with Administrator privileges. 3. Insert the motherboard/system support DVD to
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 129
    . 8. From the Setup Options window, click Next to start the installation. By default, Intel(R) PROSet for Windows Device Manager and Windows PowerShell Module are ticked. ASUS P10S-V/4L 6-11
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 130
    9. Click Install to start the installation. 10. When the installation is done, press Finish to complete the installation. 6-12 Chapter 6: Driver Installation
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 131
    the file ASSETUP.EXE from the BIN folder. Double-click the ASSETUP.EXE to run the support DVD. 4. From the Main Menu, click ASPEED AST1400/AST2400 Display Driver on the Drivers tab to start the installation. 5. From the installation window, click Next to start the installation. ASUS P10S-V/4L 6-13
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 132
    6. Click Install to proceed with the installation. 7. Click Finish to complete the installation. 6-14 Chapter 6: Driver Installation
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 133
    Appendix
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 134
    P10S-V/4L block diagram A-2 Appendix
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 135
    tam metni şu adreste bulunabilir: www.asus.com/support Bosanski ASUSTeK Computer Inc. ovim izjavljuje da je ovaj uređaj usklađen sa bitnim zahtjevima i ostalim odgovarajućim odredbama vezanih direktiva. Cijeli tekst EU izjave o usklađenosti dostupan je na: www.asus.com/support ASUS P10S-V/4L A-3
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 136
    +886-2-2894-3447 Fax +886-2-2890-7798 Web site https://www.asus.com Technical Support Telephone +86-21-38429911 Fax +86-21-58668722 ext: 9101 Online Support https://www.asus.com/support/Product/ContactUs/Services/ questionform/?lang=en ASUSTeK COMPUTER INC. (Taiwan) Address 4F, No. 150
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 137
    Czech Republic Telephone +420-596766888 Web site https://www.asus.com/cz/ Technical Support Telephone +420-596-766-891 Fax +420-596-766-329 E-mail [email protected] Online Support https://www.asus.com/support/Product/ContactUs/Services/ questionform/?lang=cs-cz ASUS P10S-V/4L A-5
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 138
    Web site Ul. Postępu 6, 02-676 Warszawa, Poland https://www.asus.com/pl/ Technical Support Telephone Online Support +48-225718033 https://www.asus.com/support/Product/ContactUs/Services/ questionform/?lang=pl-pl ASK-Service (Russia and CIS) Address 10 Telephone (495) 640-32-75 Web
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 139
    must accept any interference received, including interference that may cause undesired operation. Representative Person's Name : Steve Chang / President Signature : Date : Aug. 07, 2015 Ver. 140331 ASUS P10S-V/4L A-7
  • Asus P10S-V/4L | P10S-V4L User Guide - Page 140
    A-8 Appendix
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
Motherboard
P10S-V/4L