Asus P12R-M/10G-2T Series User Manual

Asus P12R-M/10G-2T Manual

Get Asus P12R-M/10G-2T PDF manuals and user guides View all Asus P12R-M/10G-2T manuals
Add to My Manuals
Save this manual to your list of manuals

Asus P12R-M/10G-2T manual content summary:

  • Asus P12R-M/10G-2T | Series User Manual - Page 1
    Motherboard P12R-M Series
  • Asus P12R-M/10G-2T | Series User Manual - Page 2
    written permission of ASUSTeK COMPUTER INC. ("ASUS"). Product warranty or service will not be extended if: (1) the product is repaired, modified the serial number of the product is defaced or missing. ASUS PROVIDES THIS MANUAL "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,
  • Asus P12R-M/10G-2T | Series User Manual - Page 3
    Contents Safety information...vii Electrical safety vii Operation safety vii P12R-M Series Specifications Summary ix Chapter 1: Product Introduction 1.1 Welcome!...1-2 1.2 Package contents 1-2 1.3 Serial number label 1-3 1.4 Special features 1-3 1.4.1 Product highlights 1-3 1.4.2
  • Asus P12R-M/10G-2T | Series User Manual - Page 4
    Contents 2.6 Jumpers...2-23 2.7 Onboard LEDs 2-29 2.8 Connectors 2-31 2.8.1 Rear panel connectors 2-31 2.8.2 Internal connectors 2-34 Chapter 3: Powering Up 3.1 Starting up for the first time 3-2 3.2 Powering off the computer 3-3 3.2.1 Using the OS shut down function 3-3 3.2.2 Using
  • Asus P12R-M/10G-2T | Series User Manual - Page 5
    4-22 4.4.11 PCI Subsystem Settings 4-23 4.4.12 USB Configuration 4-27 4.4.13 Network Stack Configuration 4-28 4.4.14 CSM (Compatibility Support Module 4-29 4.4.15 NVMe Configuration 4-31 4.4.16 APM Configuration 4-31 4.4.17 Third-party UEFI driver configurations 4-32 4.5 Chipset
  • Asus P12R-M/10G-2T | Series User Manual - Page 6
    Driver Installation 6.1 RAID driver installation 6-2 6.1.1 Creating a USB flash drive with RAID drive 6-2 6.1.2 Installing the RAID controller driver 6-2 6.2 Running the Support DVD 6-5 Appendix P12R-M Series block diagram A-2 Q-Code table...A-3 Notices ...A-5 Service and Support A-9 vi
  • Asus P12R-M/10G-2T | Series User Manual - Page 7
    Contact a qualified service technician or your retailer. Operation safety • Before installing the motherboard and adding devices on it, carefully read all the manuals that came with . • If you encounter technical problems with the product, contact a qualified service technician or your retailer. vii
  • Asus P12R-M/10G-2T | Series User Manual - Page 8
    of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORTANT: Instructions that you MUST follow to complete a task
  • Asus P12R-M/10G-2T | Series User Manual - Page 9
    Link Slot Location 7 Intel® C252: Storage Networking Graphic SATA Controller SAS Controller LAN VGA HDMI 6 x SATA 6Gb/s ports Intel® VROC (Windows & Linux) (Support software RAID 0, 1, 10 & 5) Optional kits: ASUS PIKE II 3008 8-port SAS 12Gb/s HBA card ASUS PIKE II 3108 8-port SAS HW 12Gb
  • Asus P12R-M/10G-2T | Series User Manual - Page 10
    Onboard I/O Connectors Rear I/O Connectors Management Solution Monitoring Environment TPM Header PSU Connector Management Header USB Connector/ Header Fan Header SMBus Chassis Intruder Front LAN LED Serial Port Header VGA Header M.2 Connector External USB Port VGA Port RJ-45 P12R-M P12R-M/10G-2T
  • Asus P12R-M/10G-2T | Series User Manual - Page 11
    Chapter 1: Product Introduction Product Introduction This chapter describes the motherboard features and the new technologies it supports. 1
  • Asus P12R-M/10G-2T | Series User Manual - Page 12
    package for the following items. Items Standard Gift Box Pack Standard Bulk Pack I/O Shield Cables SATA 6G cable COM port cable Application CD Support DVD Accessory Metal Plate for LGA1200 Packaging Qty. 1 3 1 1 1 1 pc per carton 1 --1 pc per carton 1 10 pcs per carton If any of the
  • Asus P12R-M/10G-2T | Series User Manual - Page 13
    shown as the figure below. With the correct serial number of the product, ASUS Technical Support team members can then offer a quicker and satisfying solution to your problems. P12R-M xxSxxxxxxxxx Made in China 合格 P12R-M/10G-2T xxSxxxxxxxxx Made in China 合格 1.4 Special features
  • Asus P12R-M/10G-2T | Series User Manual - Page 14
    run on 64-bit operating systems and access larger amounts of system memory for faster and more efficient computing. DDR4 memory support The motherboard supports DDR4 memory that features faster clock frequencies and higher data transfer rates of 3200 MT/s (million transfers per second). DDR4 offers
  • Asus P12R-M/10G-2T | Series User Manual - Page 15
    Temperature, fan, and voltage monitoring The CPU temperature is monitored to prevent overheating and damage. The system fan rotations per minute (RPM) is monitored for timely failure detection. The chip monitors the voltage levels to ensure stable supply of current for critical components. 1.4.2
  • Asus P12R-M/10G-2T | Series User Manual - Page 16
    1-6 Chapter 1: Product Introduction
  • Asus P12R-M/10G-2T | Series User Manual - Page 17
    Chapter 2: Hardware Information Hardware Information This chapter lists the hardware setup procedures that you have to perform when installing system components. It includes description of the jumpers and connectors on the motherboard. 2
  • Asus P12R-M/10G-2T | Series User Manual - Page 18
    2.1 Before you proceed Take note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before touching any component. • Use a grounded wrist strap or touch a safely grounded object or a metal object,
  • Asus P12R-M/10G-2T | Series User Manual - Page 19
    2.2 Motherboard overview Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it. To optimize the motherboard features, we highly recommend that you install it in an ATX 2.2 compliant chassis. Ensure to unplug the chassis power cord
  • Asus P12R-M/10G-2T | Series User Manual - Page 20
    P12R-M/10G-2T Place this side towards the rear of the chassis 2-4 Chapter 2: Hardware Information
  • Asus P12R-M/10G-2T | Series User Manual - Page 21
    2.2.3 Motherboard layout P12R-M ASUS P12R-M Series 2-5
  • Asus P12R-M/10G-2T | Series User Manual - Page 22
    P12R-M/10G-2T 2-6 Chapter 2: Hardware Information
  • Asus P12R-M/10G-2T | Series User Manual - Page 23
    2.2.4 Layout contents Slots/Sockets 1. CPU socket 2. DDR4 sockets 3. PCI Express x16 / PCI Express x8 Jumpers 1. Clear RTC RAM (2-pin CLRTC) 2. VGA controller setting (3-pin VGA_SW1) 3. DDR4 Thermal Event jumper (3-pin DIMMTRIP2) 4. ME firmware force recovery setting (3-pin ME_RCVR1) 5. Smart Ride
  • Asus P12R-M/10G-2T | Series User Manual - Page 24
    Rear panel connectors (P12R-M/10G-2T) 1. Video Graphics Adapter port 2. RJ-45 port for iKVM 3. USB 3.2 Gen 2 ports 1 and 2 4. RJ-45 ports for Intel® LOM X710AT LAN 1-2 5. HDMI™ port 6. Q-Code LED 7. Power-on Button Page 2-32 2-32 2-32 2-32 2-32 2-32 2-32 Internal connectors 1. Serial ATA 6.0 Gbp/s
  • Asus P12R-M/10G-2T | Series User Manual - Page 25
    2.3 Central Processing Unit (CPU) The motherboard comes with a surface mount LGA1200 socket designed for the Intel® Xeon® E processor (up to 95W) and Intel® Pentium™ processors. • Upon purchase of the motherboard, ensure that the PnP cap is on the socket and the socket contacts are not bent. Contact
  • Asus P12R-M/10G-2T | Series User Manual - Page 26
    2. Press the load lever with your thumb (A), then move it to the right (B) until it is released from the retention tab. Do not remove the PnP cap yet from the CPU socket. Doing so may bend the pins of the socket. Retention tab 3. Lift the load plate. Load lever 4. Remove the PnP cap from the CPU
  • Asus P12R-M/10G-2T | Series User Manual - Page 27
    6. Close the load plate (A), ensuring that the front edge of the load plate slides under the retention lock (B). 7. Push the load lever down and insert it under the retention tab to secure the CPU in the socket. 8. Apply some Thermal Interface Material to the exposed area of the CPU that the
  • Asus P12R-M/10G-2T | Series User Manual - Page 28
    2.3.2 Installing the CPU heatsink The Intel® LGA1200 processor requires a specially designed CPU heatsink to ensure optimum thermal condition and performance. • When you buy a boxed Intel® processor, a specially designed CPU heatsink or a CPU heatsink with a CPU fan assembly is included depending on
  • Asus P12R-M/10G-2T | Series User Manual - Page 29
    3. Connect the CPU fan cable to the connector on the motherboard labeled CPU_FAN1. DO NOT forget to connect the CPU fan connector! Hardware monitoring errors can occur if you fail to plug this connector. 2.3.3 Uninstalling the CPU heatsink and fan To uninstall the CPU heatsink and fan: 1.
  • Asus P12R-M/10G-2T | Series User Manual - Page 30
    2.3.4 Installing the CPU heatsink in rack The Intel® LGA1200 processor requires a specially designed heatsink to ensure optimum thermal condition and performance. • Ensure that you use qualified heatsink assembly only. • Ensure that you have applied the thermal interface material to the top of the
  • Asus P12R-M/10G-2T | Series User Manual - Page 31
    2.4 System memory 2.4.1 Overview The motherboard comes with four (4) Double Data Rate 4 (DDR4) Dual Inline Memory Modules (DIMM) sockets. A DDR4 module is notched differently from a DDR, DDR2, or DDR3 module. DO NOT install a DDR, DDR2, or DDR3 memory module to the DDR4 slot. The figure illustrates
  • Asus P12R-M/10G-2T | Series User Manual - Page 32
    more information, see the section Chassis cover. 2. Simultaneously press the retaining clips outward to unlock the DIMM. 3. Remove the DIMM from the socket. Support the DIMM lightly with your fingers when pressing the retaining clips. The DIMM might get damaged when it flips out with extra force
  • Asus P12R-M/10G-2T | Series User Manual - Page 33
    the tables on the next page. 3. Install the software drivers for the expansion card. When using PCI cards on shared slots, ensure that the drivers support "Share IRQ" or that the cards do not need IRQ assignments. Otherwise, conflicts will arise between the two PCI groups, making the system unstable
  • Asus P12R-M/10G-2T | Series User Manual - Page 34
    2.5.3 Interrupt assignments Standard Interrupt assignments IRQ Priority Standard function 0 1 System Timer 1 - - 2 - Programmable Interrupt 3 4 Communications Port (COM2) 4 5 Communications Port (COM1) 5 - - 6 - - 7 - - 8 - - 9 - - 10 - - 11 - - 12 - - 13 2
  • Asus P12R-M/10G-2T | Series User Manual - Page 35
    performance add-on cards. 2.5.5 PCI Express x16 slot (x16 link) The onboard PCIEX16_6 provides one x16 Gen4 link to CPU. This slot supports VGA cards and various server class high performance add-on cards. No.(Slot location) 1 (slot 6) 2 (slot 4) Short Description PCIEX16_6 1 x PCI-E x16 (x16
  • Asus P12R-M/10G-2T | Series User Manual - Page 36
    2.5.6 Installing the Baseboard Management Card Follow the steps below to install an optional ASMB10 Management Card on your motherboard. The motherboard illustration is for reference only. The motherboard layout and appearance may vary depending on the model, but the installation steps remain the
  • Asus P12R-M/10G-2T | Series User Manual - Page 37
    up to 2280) to the onboard M.2 slot on the motherboard. This connector supports type 2242 / 2260 / 2280 devices on PCIe Gen 3 x4 interface. • The M.2 (NGFF) device is purchased separately. • The motherboard illustration is for reference only. The motherboard
  • Asus P12R-M/10G-2T | Series User Manual - Page 38
    2.5.8 (optional) Installing the PFR module The optional PFR module will come pre-installed on your system and is connected to the PFR module connector on your motherboard. • The illustration below is for reference only. • For more information or assistance, please refer to www.asus.com. 1. Locate
  • Asus P12R-M/10G-2T | Series User Manual - Page 39
    2.6 Jumpers The motherboard illustration is for reference only. The motherboard layout and appearance may vary depending on the model, but the locations for these jumpers/LEDs/connectors remain the same. 1. Clear RTC RAM (2-pin CLRTC) This jumper allows you to clear the CMOS memory system setup
  • Asus P12R-M/10G-2T | Series User Manual - Page 40
    2. VGA controller setting (3-pin VGA_SW1) This jumper allows you to enable or disable the onboard VGA controller. Set to pins 1-2 to activate the VGA feature. 3. DDR4 Thermal Event jumper (3-pin DIMMTRIP2) Set to pins 1-2 to enable DDR4 DIMM thermal sensing event. 2-24 Chapter 2: Hardware
  • Asus P12R-M/10G-2T | Series User Manual - Page 41
    4. ME firmware force recovery setting (3-pin ME_RCVR1) This jumper allows you to force Intel Management Engine (ME) boot from recovery mode when ME become corrupted. 5. Smart Ride Through (SmaRT) setting (3-pin SMART_PSU1) This jumper allows you to enable or disable the Smart Ride Through (SmaRT)
  • Asus P12R-M/10G-2T | Series User Manual - Page 42
    the DMLAN IP to static mode (IP=10.10.10.10, submask=255.255.255.0). 7. SATADOM power setting (3-pin DOM_PWR1) This jumper allows SATA56 to support SATADOM which do not need external power connections. Set to pins 2-3 to activate the SATA56
  • Asus P12R-M/10G-2T | Series User Manual - Page 43
    8. CPU PCIE configuration setting (4-pin CFG5-6) These jumpers allow you to configure the speed at which PCIEX16_6 will run at. Refer to the table below for the different jumper configurations. Jumper Setting CFG6 CFG5 12 12 23 PCIEX16_6 slot configuration Rise23r3c4ard (defaul3t) 4 12 12 23
  • Asus P12R-M/10G-2T | Series User Manual - Page 44
    9. PCIe SMBus Switcher setting (3-pin SMB_SW1) This jumper allows toggle whether the SMBUS signal comes from BMC or PCH. 2-28 Chapter 2: Hardware Information
  • Asus P12R-M/10G-2T | Series User Manual - Page 45
    2.7 Onboard LEDs The motherboard illustration is for reference only. The motherboard layout and appearance may vary depending on the model, but the locations for these jumpers/LEDs/connectors remain the same. 1. Standby Power LED (SBPWR1) The motherboard comes with a standby power LED. The green
  • Asus P12R-M/10G-2T | Series User Manual - Page 46
    3. Location LED (LOCLED1) This onboard LED lights up when the Location button on the server is pressed or when triggered by a system management software. The Location LED helps visually locate and quickly identify the server in error on a server rack. 4. Message LED (MLED1) This onboard LED lights
  • Asus P12R-M/10G-2T | Series User Manual - Page 47
    2 devices. 5. HDMI™ port. The HDMI™ (High Definition Multimedia Interface) port supports a Full-HD device such as an LCD TV or monitor to allow viewing on status of your system. Refer to the Q-Code table of this user guide for more information about the 2-digit codes. 7. Power-on Button: Press this
  • Asus P12R-M/10G-2T | Series User Manual - Page 48
    LED indications. 5. HDMI™ port. The HDMI™ (High Definition Multimedia Interface) port supports a Full-HD device such as an LCD TV or monitor to allow viewing on status of your system. Refer to the Q-Code table of this user guide for more information about the 2-digit codes. 7. Power-on Button: Press
  • Asus P12R-M/10G-2T | Series User Manual - Page 49
    Intel® I210 LAN port LED indications Activity/Link LED Status Description OFF GREEN BLINKING No link Linked Data activity Speed LED Status Description OFF ORANGE GREEN 10 Mbps connection 100 Mbps connection 1 Gbps connection ACT/LINK SPEED LED LED ACT/LINK SPEED LED LED Intel® LOM X710AT
  • Asus P12R-M/10G-2T | Series User Manual - Page 50
    2.8.2 Internal connectors 1. Serial ATA 6.0 Gbp/s connectors (7-pin SATA6G_1-4; SATA5-6) Supported by the Intel® C252 chipset, these connectors are for the Serial ATA signal cables for Serial ATA hard disk drives that allows up to 6Gb/s
  • Asus P12R-M/10G-2T | Series User Manual - Page 51
    3. Serial General Purpose Input/Output connector (6-1 pin SGPIO1) The SGPIO 1 connector is used for the Intel Rapid Storage Technology Enterprise SGPIO interface that controls the LED pattern generation, device information, and general purpose data. DO NOT connect a 1394 cable to the USB connectors.
  • Asus P12R-M/10G-2T | Series User Manual - Page 52
    . The plugged USB 3.2 Gen 2 device may run on xHCI or EHCI mode depending on the operating system's setting. 6. VGA connector (16-pin VGA_HDR1) This connector supports the VGA High Dynamic-Range interface. 2-36 Chapter 2: Hardware Information
  • Asus P12R-M/10G-2T | Series User Manual - Page 53
    also helps enhance network security, protects digital identities, and ensures platform integrity. 8. Fan connectors (4-pin CPU_FAN1, FRNT_FAN1-4, REAR_FAN1) The fan connectors support cooling fans. Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each
  • Asus P12R-M/10G-2T | Series User Manual - Page 54
    the ASUS ASMB10. Power supply is required to meet PMBus specification and customized BMC FW may be needed. Please contact ASUS if your need further support. 2-38 Chapter 2: Hardware Information
  • Asus P12R-M/10G-2T | Series User Manual - Page 55
    configuring a system with more power-consuming devices. The system may become unstable or may not boot up if the power is inadequate. • This motherboard supports ATX2.0 PSU or later version. • Ensure that your PSU can provide at least the minimum power required by your system. ASUS P12R-M Series
  • Asus P12R-M/10G-2T | Series User Manual - Page 56
    12. System panel connector (20-1 pin PANEL1) This connector supports several chassis-mounted functions. • System power LED (3-pin PLED) This 3-pin connector is for the system power LED. Connect the chassis power LED cable to
  • Asus P12R-M/10G-2T | Series User Manual - Page 57
    13. Auxiliary panel connectors (20-2 pin AUX_PANEL1; 20-pin AUX_PANEL2) These connectors are for additional front panel features including front panel SMB, locator LED and switch, chassis intrusion, and LAN LEDs. • Front panel SMB (6-1 pin FPSMB) This 6-1 pin connector is for the front panel SMBus
  • Asus P12R-M/10G-2T | Series User Manual - Page 58
    14. Chassis intrusion connector (2-pin INTRUSION) This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a
  • Asus P12R-M/10G-2T | Series User Manual - Page 59
    16. Thermal sensor cable connector (3-pin TR1) This connector allows you to connect a thermal sensor cable that is used for monitoring temperature. Connect the thermal sensor cable to the connector and place its probe to the device that you want to monitor. 17. VPP_I2C connector (10-1 pin VPP_I2C1)
  • Asus P12R-M/10G-2T | Series User Manual - Page 60
    2-44 Chapter 2: Hardware Information
  • Asus P12R-M/10G-2T | Series User Manual - Page 61
    Powering Up This chapter describes the power up sequence, and ways of shutting down the system. 3 Chapter 3: Powering Up
  • Asus P12R-M/10G-2T | Series User Manual - Page 62
    Detected. No VGA Detected. Chassis Intrusion. BIOS-image Crash Detected. 7. At power on, hold down the key to enter the BIOS Setup. Follow the instructions in Chapter 4. 3-2 Chapter 3: Powering Up
  • Asus P12R-M/10G-2T | Series User Manual - Page 63
    3.2 Powering off the computer 3.2.1 Using the OS shut down function Using Windows® Server 2019: 1. Press ++. 2. Click on the Power icon on the lower right side of the screen. 3. Select Shut down. 4. In the Shutdown Event Tracker, select the Other (Planned) option in the selection
  • Asus P12R-M/10G-2T | Series User Manual - Page 64
  • Asus P12R-M/10G-2T | Series User Manual - Page 65
    BIOS Setup This chapter tells how to change the system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided. 4
  • Asus P12R-M/10G-2T | Series User Manual - Page 66
    4.1 Managing and updating your BIOS The following utilities allow you to manage and update the motherboard Basic Input/Output System (BIOS) setup: 1. ASUS CrashFree BIOS 3 To recover the BIOS using a bootable USB flash disk drive when the BIOS file fails or gets corrupted. 2. ASUS EzFlash Updates
  • Asus P12R-M/10G-2T | Series User Manual - Page 67
    4.1.2 ASUS EzFlash Utility The ASUS EzFlash Utility feature allows you to update the BIOS using a USB flash disk without having to use a DOS‑based utility. Download the latest BIOS from the ASUS website at www.asus.com before using this utility. The succeeding BIOS screens are for reference only.
  • Asus P12R-M/10G-2T | Series User Manual - Page 68
    the motherboard. Save the BIOS file to a bootable USB flash disk drive. 2. Download the BUPDATER utility (BUPDATER.exe) from the ASUS support website at www.asus.com/support to the bootable USB flash disk drive you created earlier. 3. Boot the system in DOS mode, then at the prompt, type: BUPDATER
  • Asus P12R-M/10G-2T | Series User Manual - Page 69
    The utility verifies the file, then starts updating the BIOS file. ASUSTek. EzFlash Utility Current Platform Platform : P12R-M Version : 0201 Build date: 04/13/2021 New Platform Platform : P12R-M Version : 0207 Build date: 06/25/2021 Start Programming Flash. DO NOT SHUTDOWN THE SYSTEM!!! Write 75
  • Asus P12R-M/10G-2T | Series User Manual - Page 70
    4.2 BIOS setup program This motherboard supports a programmable firmware chip that you can update using the provided utility described in section 4.1 Managing and updating your BIOS. Use the BIOS Setup program when
  • Asus P12R-M/10G-2T | Series User Manual - Page 71
    4.2.1 BIOS menu screen Menu items Menu bar Configuration fields General help Navigation keys 4.2.2 Menu bar The menu bar on top of the screen has the following main items: Main For changing the basic system configuration Advanced For changing the advanced system settings Chipset
  • Asus P12R-M/10G-2T | Series User Manual - Page 72
    4.2.3 Menu items The highlighted item on the menu bar displays the specific items for that menu. For example, selecting Main shows the Main menu items. The other items (Advanced, Chipset, Security, Boot, Monitor, Tool, Event Logs, Server Mgmt, and Exit) on the menu bar have their respective menu
  • Asus P12R-M/10G-2T | Series User Manual - Page 73
    4.3 Main menu When you enter the BIOS Setup program, the Main menu screen appears. The Main menu provides you an overview of the basic system information, and allows you to set the system date, time, and language. Navigate to the second page of the screen to see the rest of items in this menu by
  • Asus P12R-M/10G-2T | Series User Manual - Page 74
    4.4 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. Take caution when changing the settings of the Advanced menu items. Incorrect field values can cause the system to malfunction. 4-10 Chapter 4: BIOS Setup
  • Asus P12R-M/10G-2T | Series User Manual - Page 75
    4.4.1 CPU Configuration CPU Flex Ratio Override [Disabled] Allows you to enable or disable CPU Flex Ratio Override. Configuration options: [Disabled] [Enabled] The following item appears only when CPU Flex Ratio Override is set to [Enabled]. CPU Flex Ratio Settings [37] Allows you to set the CPU
  • Asus P12R-M/10G-2T | Series User Manual - Page 76
    ] [Enabled] AVX3 [Enabled] Allows you to enable or disable the AVX 3 Instructions. This is applicable for Big Core only. Configuration options: [Disabled] [Enabled] Allows more than two frequency ranges to be supported. Configuration options: [Disabled] [Enabled] 4-12 Chapter 4: BIOS Setup
  • Asus P12R-M/10G-2T | Series User Manual - Page 77
    MSR. Configuration options: [Disabled] [Enabled] HDC Control [Enabled] [Disabled] Disable HDC. [Enabled] Can be enable by OS if OS native support available. Turbo Mode [Enabled] Allows you to enable or disable processor turbo mode if EMTTM is also enabled. Configuration options: [Disabled
  • Asus P12R-M/10G-2T | Series User Manual - Page 78
    The following items appears only when C-States is set to [Enabled]. Enhanced C-States [Enabled] Allows you to enable or disable C11E. Enable this item to allow the CPU to switch to minimum speed when all cores enter C-State. Configuration options: [Disabled] [Enabled] C-State Auto Demotion [C1] This
  • Asus P12R-M/10G-2T | Series User Manual - Page 79
    4.4.3 Server ME Configuration Displays the Server ME Technology parameters on your system. Scroll using / keys to see more items. ASUS P12R-M Series 4-15
  • Asus P12R-M/10G-2T | Series User Manual - Page 80
    . This option may not be effective with some OS. Configuration options: [Disabled] [Enabled] The following items appear only when Whea Driver Support is set to [Enabled]. Whea FFM Logging [Disable Link] Allows you to enable or disable Whea FFM logging of errors. Configuration options: [Disable
  • Asus P12R-M/10G-2T | Series User Manual - Page 81
    options: [No] [Yes] Enable PERR propagation [No] Configuration options: [No] [Yes] 4.4.5 Trusted Computing Security Device Support [Enabled] This item allows you to enable or disable BIOS support for security device. O.S. will not show Security Device. TCG EFI protocol and INT1A interface will not
  • Asus P12R-M/10G-2T | Series User Manual - Page 82
    4.4.6 Redfish Host Interface Settings Redfish [Disabled] Allows you to enable or disable Redfish. Configuration options: [Disabled] [Enabled] The following items appear only when Redfish is set to [Enabled]. Authentication mode [Basic Authentication] Allows you to select the authentication mode.
  • Asus P12R-M/10G-2T | Series User Manual - Page 83
    P12R-M/10G-2T Onboard X710 LAN Configuration Intel X710 LAN1-2 LAN Enable [Enabled] Allows you to enable or disable the Intel LAN. Configuration options: [Disabled] [Enabled] 4.4.8 Serial Port Console Redirection COM1 Console Redirection [Disabled] Allows you to enable or disable the console
  • Asus P12R-M/10G-2T | Series User Manual - Page 84
    Terminal Type [ANSI] Allows you to set the terminal type. [VT100] ASCII char set. [VT100+] Extends VT100 to support color, function keys, etc. [VT-UTF8] Uses UTF8 encoding to map Unicode chars onto 1 or more bytes. [ANSI] Extended ASCII char set. Bits per second [
  • Asus P12R-M/10G-2T | Series User Manual - Page 85
    Allows you to select a the number of rows and columns in supported redirection. Configuration options: [80x24] [80x25] Redirect After POST [Always Settings Out-of-Band Mgmt Port [COM1] Microsoft Windows Emergency Management Services (EMS) allow for remote management of a Windows Server OS through
  • Asus P12R-M/10G-2T | Series User Manual - Page 86
    4.4.9 Intel TXT Information You may view the Intel TXT information in this menu. 4.4.10 SIO Configuration Logical Devices state on the left side of the control, reflects the current Logical Device state. Changes made during Setup Session will be shown after you restart the system. [*Active*] Serial
  • Asus P12R-M/10G-2T | Series User Manual - Page 87
    The following item appears only when Use This Device is set to [Enabled]. Disabling SIO Logical Devices may have unwanted side effects. PROCEED WITH CAUTION. Possible: [Use Automatic Settings] Allows the user to change the device resource settings. New settings will be reflected no this setup page
  • Asus P12R-M/10G-2T | Series User Manual - Page 88
    [Enabled] Allows you to enable or disable 64-bit capable devices to be decoded in above 4G address space. It only works if the system supports 64-bit PCI decoding. Configuration options: [Disabled] [Enabled] The following items appear only when Above 4G Decoding is set to [Enabled]. LAN Device 4G
  • Asus P12R-M/10G-2T | Series User Manual - Page 89
    value. Configuration options: [Auto] [128 Bytes] [256 Bytes] [512 Bytes] [1024 Bytes] [2048 Bytes] [4096 Bytes] PCI Express Link Register Settings ASPM Support [Disabled] Allows you to set the ASPM level. [Disabled] Disables ASPM. [Auto] BIOS auto configure. [Force L0s] Force all links to L0
  • Asus P12R-M/10G-2T | Series User Manual - Page 90
    [Disabled] [Force to 2.5 GT/s] [Force to 5.0 GT/s] [Force to 8.0 GT/s] [Force to 16.0 GT/s] [Force to 32.0 GT/s] Clock Power Management [Disabled] If supported by hardware and set to [Enabled], the device is permitted to use CLKREQ# signal for power management of Link clock in accordance to protocol
  • Asus P12R-M/10G-2T | Series User Manual - Page 91
    width size reduction for the purpose of correcting unstable link operation. Configuration options: [Disabled] [Enabled] Hardware Autonomous Speed [Enabled] If supported by hardware and set to [Disabled], this will disable the hardware's ability to change link speed except speed rate reduction for
  • Asus P12R-M/10G-2T | Series User Manual - Page 92
    you to enable or disable USB Mass Storage driver support. Configuration options: [Disabled] [Enabled] Port 60/64 from Hub descriptor. Configuration options: [Auto] [Manual] The following item appears only when Device power-up delay is set to [Manual]. Device power-up delay in seconds [5] Allows
  • Asus P12R-M/10G-2T | Series User Manual - Page 93
    . If disabled, Ipv6 PXE boot option will not be created. Configuration options: [Disabled] [Enabled] Ipv6 HTTP Support [Disabled] Enables or disables the Ipv6 HTTP Boot Support. If disabled, Ipv6 PXE boot option will not be created. Configuration options: [Disabled] [Enabled] PXE boot wait time
  • Asus P12R-M/10G-2T | Series User Manual - Page 94
    CSM is set to [Enabled]. GateA20 Active [Upon Request] This allows you to set the GA20 option. [Upon Request] GA20 can be disabled using BIOS services. [Always] Do not allow disabling GA20; this option is useful when any RT code is executed above 1MB. Interrupt 19 Capture [Immediate] Allows you
  • Asus P12R-M/10G-2T | Series User Manual - Page 95
    4.4.15 NVMe Configuration You may view the NVMe controller and Drive information if an NVMe device is connected. 4.4.16 APM Configuration This page will allow you to configure the Advance Power Management (APM) settings. Restore AC Power Loss [Last State] When set to [Power Off], the system goes
  • Asus P12R-M/10G-2T | Series User Manual - Page 96
    4.4.17 Third-party UEFI driver configurations Additional configuration options for third-party UEFI drivers installed to the system will appear in the section marked in red in the screenshot below. 4-32 Chapter 4: BIOS Setup
  • Asus P12R-M/10G-2T | Series User Manual - Page 97
    4.5 Chipset menu The Chipset menu allows you to change the platform settings. Take caution when changing the settings of the Chipset menu items. Incorrect field values can cause the system to malfunction. 4.5.1 System Agent (SA) Configuration Memory Configuration Maximum Memory Frequency [Auto]
  • Asus P12R-M/10G-2T | Series User Manual - Page 98
    to set DDR Frequency and Gear1 / Gear2 control for all SAGV points. Configuration options: [Auto] [Manual] Memory Scrambler [Enabled] Allows you to enable or disable Memory Scrambler support. Configuration options: [Disabled] [Enabled] Fast Boot [Disabled] Allows you to enable or disable fast path
  • Asus P12R-M/10G-2T | Series User Manual - Page 99
    you to enable or disable 64-bit capable devices to be decoded in above 4G address space. It only works if the system supports 64-bit PCI decoding. Configuration options: [Disabled] [Enabled] 4.5.2 PCH Configuration PCI Express Configuration DMI Link ASPM Control [Disabled] Allows you to enable or
  • Asus P12R-M/10G-2T | Series User Manual - Page 100
    SATA 1 Port 1 [Enabled] Allows you to enable or disable the SATA port. Configuration options: [Disabled] [Enabled] SATA6G_1 Hot Plug [Disabled] Allows you to enable or disable this port as hot pluggable. Configuration options: [Disabled] [Enabled] Spin Up Device [Disabled] Allows you to enable or
  • Asus P12R-M/10G-2T | Series User Manual - Page 101
    SATA Device Type [Hard Disk Drive] Allows you to identify the SATA port is connected to a solid state drive or a hard disk drive Configuration options: [Hard Disk Drive] [Solid State Drive] SATA 4 Port 1 [Enabled] Allows you to enable or disable the SATA port. Configuration options: [Disabled] [
  • Asus P12R-M/10G-2T | Series User Manual - Page 102
    Spin Up Device [Disabled] Allows you to enable or disable Spin Up Device. If enabled for any of the ports, Staggered Spin Up will be performed and only the drives which have this option enabled will spin up at boot. Otherwise all drives spin up at boot. Configuration options: [Disabled] [Enabled]
  • Asus P12R-M/10G-2T | Series User Manual - Page 103
    4.6 Security menu This menu allows a new password to be created or a current password to be changed. The menu also enables or disables the Secure Boot state and lets the user configure the System Mode state. Administrator Password To set an administrator password: 1. Select the Administrator
  • Asus P12R-M/10G-2T | Series User Manual - Page 104
    User Password To set a user password: 1. Select the User Password item and press . 2. From the Create New Password box, key in a password, then press . 3. Confirm the password when prompted. To change a user password: 1. Select the User Password item and press . 2. From the
  • Asus P12R-M/10G-2T | Series User Manual - Page 105
    The following items are available only when Secure Boot Mode is set to [Custom]. Install Default Secure Boot Keys This option will load the default secure boot keys, including the PK (Platform key), KEK (keyexchange key), db (signature database), and dbx (revoked signature database). All the secure
  • Asus P12R-M/10G-2T | Series User Manual - Page 106
    Clear Secure Boot Keys This option will delete all previously applied secure boot keys, including the PK (Platform key), KEK (key-exchange key), db (signature database), and dbx (revoked signature database). All the secure boot keys states will change from unloaded to loaded. Save changes and reset
  • Asus P12R-M/10G-2T | Series User Manual - Page 107
    4.7 Boot menu The Boot menu items allow you to change the system boot options. Setup Prompt Timeout [1] Allows you to set the number of seconds that the firmware waits before initiating the original default boot selection. 65535(OxFFFF) means indefinite waiting. Use the or to adjust the
  • Asus P12R-M/10G-2T | Series User Manual - Page 108
    following items appear only when Fast Boot is set to [Enabled]. SATA Support [Last Boot SATA Devices Only] [Last Boot SATA Devices Only] Only . [EFI Driver] Efi driver will still be installed with EFI OS. USB Support [Full Intial] [Disable Link] All USB devices will NOT be available until
  • Asus P12R-M/10G-2T | Series User Manual - Page 109
    to select the power-on state for the NumLock. Configuration options: [Auto Mode] [Full Speed Mode] [Manual Speed Mode] The following items appear only when Fan Speed Control is set to [Manual Speed Mode]. REAR_FAN1 / CPU_FAN1 / FRNT_FAN1-4 Duty% [50] Allows you to set the desired POST Report waiting
  • Asus P12R-M/10G-2T | Series User Manual - Page 110
    4.9 Tool menu Start ASUS EzFlash Allows you to run ASUS EzFlash BIOS ROM Utility when you press . Refer to the ASUS EzFlash Utility section for details. ASUS SMBIOS Viewer Allows you to start ASUS SMBIOS Viewer when you press . 4-46 Chapter 4: BIOS Setup
  • Asus P12R-M/10G-2T | Series User Manual - Page 111
    4.10 Event Logs menu The Event Logs menu items allow you to change the event log settings and view the system event logs. ASUS P12R-M Series 4-47
  • Asus P12R-M/10G-2T | Series User Manual - Page 112
    4.10.1 Change Smbios Event Log Settings Press to change the Smbios Event Log configuration. All values changed here do not take effect until computer is restarted. Enabling/Disabling Options Smbios Event Log [Enabled] Change this to enable or disable all features of Smbios Event Logging
  • Asus P12R-M/10G-2T | Series User Manual - Page 113
    The following item appears only when Log EFI Status Code is set to [Enabled]. Convert EFI Status Codes to Standard Smbios Type [Disabled] This option allows you to enable or disable converting of EFI Status Codes to Standard Smbios Type (Not all may be translated). Configuration options: [Disabled]
  • Asus P12R-M/10G-2T | Series User Manual - Page 114
    item allows you to enable or disable interfaces to communicate with BMC. Configuration options: [Disabled] [Enabled] The following items appear only when BMC Support is set to [Enabled]. OS Watchdog Timer [Disabled] This item allows you to start a BIOS timer which can only be shut off by Management
  • Asus P12R-M/10G-2T | Series User Manual - Page 115
    BMC init phase [PEI phase] Allows you to set BMC init phase. Configuration options: [PEI phase] [BDS phase] 4.11.1 System Event Log Allows you to change the SEL event log configuration. Enabling/Disabling Options SEL Components [Enabled] Allows you to enable or disable event logging for error/
  • Asus P12R-M/10G-2T | Series User Manual - Page 116
    4.11.2 View FRU information Press to view FRU information. 4.11.3 Bmc self test log Allows you to change the SEL event log configuration. Erase Log [Yes, On every reset] Choose options for erasing Smbios Event Log. Erasing is done prior to any logging activation during reset. Configuration
  • Asus P12R-M/10G-2T | Series User Manual - Page 117
    second page, press the Page Down button. Press the Page Up button to go back to the first item in the first page. Configure IPV4 support Lan channel 1 / Lan channel 2 Configuration Address source [Unspecified] Allows you to set the LAN channel parameters statically or dynamically (by BIOS or by BMC
  • Asus P12R-M/10G-2T | Series User Manual - Page 118
    you to set the router MAC address. Configure IPV6 support Lan channel 1 / Lan channel 2 IPV6 support [Enabled] Allows you to enable or disable IPV6 support. Configuration options: [Enabled] [Disabled] The following items appear only when IPV6 support is set to [Enabled]. Configuration Address source
  • Asus P12R-M/10G-2T | Series User Manual - Page 119
    4.12 Exit menu The Exit menu items allow you to save or discard your changes to the BIOS items. Pressing does not immediately exit this menu. Select one of the options from this menu or from the legend bar to exit. Save Changes and Reset Reset system after saving the changes. Discard
  • Asus P12R-M/10G-2T | Series User Manual - Page 120
    4-56 Chapter 4: BIOS Setup
  • Asus P12R-M/10G-2T | Series User Manual - Page 121
    RAID Configuration This chapter provides instructions for setting up, creating, and configuring RAID sets using the available utilities. 5
  • Asus P12R-M/10G-2T | Series User Manual - Page 122
    Option ROM Utility with RAID 0, RAID 1, RAID 10, and RAID 5 support (for Windows OS and Linux). 5.1.1 RAID definitions RAID 0 (Data striping) a created RAID set, copy first the RAID driver from the support DVD to a floppy disk before you install an operating system to the selected hard disk
  • Asus P12R-M/10G-2T | Series User Manual - Page 123
    Install the SATA hard disks into the drive bays following the instructions in the system user guide. 2. Connect a SATA signal cable to the signal connector a RAID set from SATA hard disk drives attached to the SATA connectors supported by Intel® C242 chipset. To do this: 1. Enter the BIOS Setup during
  • Asus P12R-M/10G-2T | Series User Manual - Page 124
    5.2 Intel® Virtual Raid on CPU in BIOS This feature allows you to do CPU RAID functions with Intel® CPU RSTe. 1. Enter the BIOS Setup during POST. 2. Go to the Advanced menu > Intel(R) VROC SATA Controller then press to display the Intel® Virtual Raid on CPU menu. Refer to Chapter 4 for
  • Asus P12R-M/10G-2T | Series User Manual - Page 125
    5.2.1 Creating a RAID set To create a RAID set: 1. From the Intel® Virtual Raid on CPU menu, select Create RAID Volume and press . The following screen appears: 2. When the Name item is selected, enter a name for the RAID set and press . 3. When the RAID Level item is selected, press
  • Asus P12R-M/10G-2T | Series User Manual - Page 126
    5.2.2 Deleting a RAID set Be cautious when deleting a RAID set. You will lose all data on the hard disk drives when you delete a RAID set. To delete a RAID set: 1. From the Intel® Virtual Raid on CPU menu, select the RAID volume you want to delete and press . The following screen appears: 2.
  • Asus P12R-M/10G-2T | Series User Manual - Page 127
    disk drives that are connected to the Serial ATA connectors supported by the Southbridge. You need to manually install the Intel® Rapid Storage Technology enterprise utility on a Windows® operating system. Please refer to the installation instructions in Chapter 6. To enter the Intel® Rapid Storage
  • Asus P12R-M/10G-2T | Series User Manual - Page 128
    5.3.1 Creating a RAID set To create a RAID set: 1. From the utility main menu, select Create Volume and select volume type. 2. Click Next. 3. Enter a name for the RAID set, then select the array disks. 4. Select Volume Size tab, you can drag the bar to decide the volume size. 5. Click Next. • If
  • Asus P12R-M/10G-2T | Series User Manual - Page 129
    6. Confirm the volume creation, than click Create Volume to continue. This process could take a while depending on the number and size of the disks. You can continue using other applications during this time. 7. Wait until the process is completed, then click OK when prompted. You still need to
  • Asus P12R-M/10G-2T | Series User Manual - Page 130
    5.3.2 Changing a Volume Type To change the volume type in Volume Properties: 1. Click the SATA array items you want to change in Volumes field. 2. From the Volume Properties field, select Type:RAID 1 Change type. 3. You can change the Name, Select the new volume type, and Select additional disks to
  • Asus P12R-M/10G-2T | Series User Manual - Page 131
    5.3.3 Deleting a volume Be cautious when deleting a volume. You will lose all data on the hard disk drives. Before you proceed, ensure that you back up all your important data from your hard drives. To delete a volume: 1. From the utility main menu, select the volume (exp. Volume_0000) in Volumes
  • Asus P12R-M/10G-2T | Series User Manual - Page 132
    5.3.4 Preferences System Preferences Allow you to set to show the notification area icon and show system information, warning, or errors here. E-Mail Preferences Allow you to set to sent e-mail of the following events: • Storage system information • Storage system warnings • Storage system errors
  • Asus P12R-M/10G-2T | Series User Manual - Page 133
    Driver Installation This chapter provides the instructions for installing the necessary drivers for different system components in both Linux® and Windows® Operating Systems. 6
  • Asus P12R-M/10G-2T | Series User Manual - Page 134
    independent hard disk drive or bootable array. This part provides the instructions on how to install the RAID controller drivers during OS installation your system. 3. Click on the optical drive to browse the contents of the support DVD. 4. Click Drivers > C25x INTEL RAID > Windows> Driver and then
  • Asus P12R-M/10G-2T | Series User Manual - Page 135
    you may connect a USB flash drive containing the RAID controller driver. Click Browse to continue. 5. Locate the driver in the corresponding folder of the Support DVD or USB flash drive and then click OK to continue. 6. Select the RAID controller driver you need from the list and click Next. ASUS
  • Asus P12R-M/10G-2T | Series User Manual - Page 136
    the RAID driver, • Replace the motherboard Support DVD with the Windows Server installation disc. • Remove the USB flash drive. Select the drive to install Windows and click Next. 8. Setup then proceeds with the OS installation. Follow the onscreen instructions to continue. 6-4 Chapter 6: Driver
  • Asus P12R-M/10G-2T | Series User Manual - Page 137
    tabs: 1. Drivers - Shows the available device drivers that the system detects. 2. Utilities - Displays the software applications and utilities that the motherboard supports. 3. Manual - Provides the link to the user guide(s). You need an internet browser installed in your OS to view the User
  • Asus P12R-M/10G-2T | Series User Manual - Page 138
    6-6 Chapter 6: Driver Installation
  • Asus P12R-M/10G-2T | Series User Manual - Page 139
    Appendix This appendix includes additional information that you may refer to when configuring the motherboard.
  • Asus P12R-M/10G-2T | Series User Manual - Page 140
    P12R-M Series block diagram A-2 Appendix
  • Asus P12R-M/10G-2T | Series User Manual - Page 141
    Q-Code table Action PHASE POST CODE 0x1 0x2 0x3 SEC Start up Security Phase 0x4 0x5 0x6 0x10 PEI(Pre-EFI 0x11 Initialization) phase 0x15 0x19 0xB0 0xB1 0xB2 0xB3 0xB4 0xB5 0xB6 MRC Progress phase 0xB7 0xB8 0xB9 0xBA 0xBB 0xBC 0xBD 0xBE 0xBF 0x32 0x33 0x34 Quick VGA
  • Asus P12R-M/10G-2T | Series User Manual - Page 142
    Action PHASE POST CODE 0x90 0x91 0x92 0x93 0x94 0x95 0x96 0x97 0x98 0x99 0x9A 0x9B 0x9C 0x9D BDS(Boot Device Selection) phase 0xb2 Normal boot 0xb3 0xb4 0xb6 0xb7 0xA0 0xA1 0xA2 0xA3 0x00~0xFF 0xA8 0xA9 0xAB 0xAD 0xAE Operating system 0xAA phase 0xAC TYPE
  • Asus P12R-M/10G-2T | Series User Manual - Page 143
    . This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer's instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation
  • Asus P12R-M/10G-2T | Series User Manual - Page 144
    and the failure does not amount to a major failure. If you require assistance please call ASUS Customer Service 1300 2787 88 or visit us at https://www.asus.com/support Declaration of compliance for product environmental regulation ASUS follows the green design concept to design and manufacture our
  • Asus P12R-M/10G-2T | Series User Manual - Page 145
    ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the of related Directives. Full text of EU declaration of conformity is available at: www.asus.com/support Français AsusTek Computer Inc. déclare par la présente que cet appareil est conforme aux
  • Asus P12R-M/10G-2T | Series User Manual - Page 146
    Irányelvek lényeges követelményeinek és egyéb vonatkozó rendelkezéseinek. Az EU megfelelőségi nyilatkozat teljes szövege innen letölthető: www.asus.com/support Latviski ASUSTeK Computer Inc. ar šo paziņo, ka šī ierīce atbilst saistīto Direktīvu būtiskajām prasībām un citiem citiem saistošajiem nosac
  • Asus P12R-M/10G-2T | Series User Manual - Page 147
    unu beyan eder. AB uygunluk bildiriminin tam metni şu adreste bulunabilir: www.asus.com/support Bosanski ASUSTeK Computer Inc. ovim izjavljuje da je ovaj uređaj usklađen sa o usklađenosti dostupan je na: www.asus.com/support Service and Support Visit our multi-language website at https://www.asus.com
  • Asus P12R-M/10G-2T | Series User Manual - Page 148
    FCC COMPLIANCE INFORMATION Per FCC Part 2 Section 2.1077 Responsible Party: Address: Phone/Fax No: Asus Computer International 48720 Kato Rd, Fremont, CA 94538 (510)739-3777/(510)608-4555 hereby declares that the product Product Name : Motherboard Model Number : P12R-M;P12R-M/10G-2T compliance
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
Motherboard
P12R-M
Series