Asus P2B-D P2B-D User Manual

Asus P2B-D Manual

Get Asus P2B-D PDF manuals and user guides View all Asus P2B-D manuals
Add to My Manuals
Save this manual to your list of manuals

Asus P2B-D manual content summary:

  • Asus P2B-D | P2B-D User Manual - Page 1
    ® P2B-D/P2B-DS Dual Pentium® III / II Motherboard USER'S MANUAL Special Features • P2B-DS • Adaptec 7890 SCSI Chipset • Adaptec 3860 SCSI Transceiver
  • Asus P2B-D | P2B-D User Manual - Page 2
    FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT. Copyright © 1999 ASUSTeK COMPUTER INC. All Rights Reserved. Product Name: ASUS P2B-D/P2B-DS Manual Revision: 1.06 E429 Release Date: July 1999 2 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-D | P2B-D User Manual - Page 3
    Germany Fax: +49-2102-4420-66 Email: [email protected] Technical Support Hotline: MB/Other: +49-2102-9599-0 Notebook: +49-2102-9599-10 Fax: +49-2102-9599-11 Online Support: www.asuscom.de/de/support WWW: www.asuscom.de FTP: ftp.asuscom.de/pub/ASUSCOM ASUS P2B-D/P2B-DS User's Manual 3
  • Asus P2B-D | P2B-D User Manual - Page 4
    SOFTWARE 36 Flash Memory Writer Utility 36 Main Menu 36 Managing and Updating Your Motherboard's BIOS 38 6. BIOS Setup 39 Load Defaults 40 Standard CMOS Setup 40 Details of Standard CMOS Setup 40 BIOS Features Setup 43 Details of BIOS Features Setup 43 4 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-D | P2B-D User Manual - Page 5
    62 VII. ADAPTEC SCSI SELECT 65 Configuring the SCSI Adapter 65 VIII. ADAPTEC EZ-SCSI 67 Quick Start Instructions 67 Troubleshooting Tips 68 Information for DOS/Windows 3.1x Users 71 IX. ASUS LAN Card 75 ASUS PCI-L101 Fast Ethernet Card 75 Features 76 ASUS P2B-D/P2B-DS User's Manual 5
  • Asus P2B-D | P2B-D User Manual - Page 6
    radiate radio frequency energy and, if not installed and used in accordance with manufacturer's instructions, may cause harmful interference to radio communications. However, there is no guarantee that rique de la classe B est conforme à la norme NMB-003 du Canada. 6 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-D | P2B-D User Manual - Page 7
    " and (2) 3.5" floppy disk drives (1) Bag of spare jumpers (1) Support drivers and utilities (1) This Motherboard User's Manual (1) ASUS C-P2T PC100 Rev. 1.02 or later (1) Adaptec 7800 Family Manager Set User's Manual (optional) 68-pin Ultra2 SCSI cable with terminator (optional) 68-pin Fast & Wide
  • Asus P2B-D | P2B-D User Manual - Page 8
    II. FEA TURES Specifications II. FEATURES Features The ASUS P2B-D/P2B-DS motherboards are carefully designed for the demanding PC user who wants advanced features processed by the fastest CPU. • Multi-Speed: Supports Dual Intel Pentium® III (450MHz and faster) and Pentium® II (233MHz to 450MHz)
  • Asus P2B-D | P2B-D User Manual - Page 9
    Port Multi-I/O Chip 4PCI Slots Programmable 2Mbit Flash ROM Hardware Monitor 2 ISA Slots Adaptec AIC-7890 Ultra2 & Ultra-Fast/Wide SCSI Chipset Intel PIIX4E PCIset (optional) 68-pin Wide SCSI Connector 68-pin Ultra2 SCSI Connector 50-pin Narrow SCSI Connector ASUS P2B-D/P2B-DS User's Manual 9
  • Asus P2B-D | P2B-D User Manual - Page 10
    pin module) DIMM Socket 0 (64 bit, 168 pin module) Floppy Disk Drives 1 PARALLEL PORT FIR CIR Keyboard Power ATX Power Connector Slot1 for CPU 1 III. INSTALLATION ASUS P2B-D/P2B-DS Motherboard Layout PS/2 MOUSE (TOP PORT) KEYBOARD (BOTTOM) CPU_FAN USB USB 1(TOP PORT) USB 2 (BOTTOM) COM 1 COM
  • Asus P2B-D | P2B-D User Manual - Page 11
    34 SB-LINK™ Connector (6-1 pins) (O/R) 23) SMB p. 34 SMBus Connector (3 pins) (O/R) *The onboard hardware monitor uses the address 290H-297H so legacy ISA cards must not use this address, otherwise conflicts will occur. O/R: Optional/Reserved for future use. ASUS P2B-D/P2B-DS User's Manual 11
  • Asus P2B-D | P2B-D User Manual - Page 12
    Motherboard Settings 2. Install Memory Modules 3. Install the Central Processing Unit (CPU) 4. Install Expansion Cards 5. Connect Ribbon Cables, Panel Wires, and Power Supply 6. Setup the BIOS Software 1. Motherboard . III. INST ALLATION Motherboard Settings 12 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-D | P2B-D User Manual - Page 13
    BIOS support. The default is set to Disable because not all computers have the appropriate ATX power supply. Your computer will not function if you set this to Enable and if you do not have the right ATX power supply. 123 Disable (Default) 123 Enable 1 R 1 P2B-D/DS Keyboard Power Up ASUS P2B
  • Asus P2B-D | P2B-D User Manual - Page 14
    BF3 BF3 BF2 BF2 BF2 BF1 BF1 BF1 BF0 BF0 BF0 7.0x (7/1) 7.5x (15/2) 8.0x (8/1) P2B-D/DS CPU Core-to-Bus Frequency Multiple WARNING! Frequencies above 100MHz exceed the specifications for the onboard Intel Chipset and are not guaranteed to be stable. 14 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-D | P2B-D User Manual - Page 15
    Motherboard Settings III. INSTALLATION Set the jumpers by the Internal speed of your processor as follows: Intel CPU [1-2] For updated processor settings, please visit ASUS' web site (see ASUS CONTACT INFORMATION). P2B-D/DS Chassis Intrusion Sensor Setting ASUS P2B-D/P2B-DS User's Manual 15
  • Asus P2B-D | P2B-D User Manual - Page 16
    III. INSTALLATION (This page was intentionally left blank.) III. INST ALLATION 16 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-D | P2B-D User Manual - Page 17
    density than EDO (Extended Data Output) chips. • BIOS shows SDRAM memory on bootup screen. • 8 chips/side modules do not support ECC, only 9 chips/side modules support ECC. • Single-sided DIMMs come in 16, 32, 64, 128MB; double-sided come in 32, 64, 128, 256MB. ASUS P2B-D/P2B-DS User's Manual 17
  • Asus P2B-D | P2B-D User Manual - Page 18
    pin density. 20 Pins 60 Pins 88 Pins Lock P2B-D/DS 168-Pin DIMM Memory Sockets (FRONT) The DIMMs must be 3.3Volt unbuffered SDRAMs motherboard. You must tell your retailer the correct DIMM type before purchasing. This motherboard supports four clock signals. 18 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-D | P2B-D User Manual - Page 19
    CPU III. INSTALLATION 3. Central Processing Unit (CPU) This motherboard provides two CPU motherboard. You may install an auxiliary fan, if necessary. Other Important Items Intel Pentium III / II Processor in an SEC cartridge ASUS C-P2T PC100 CPU Termination Card ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-D | P2B-D User Manual - Page 20
    CPU will overheat. You may install an auxiliary fan to provide adequate circulation across the processor's passive heatsink. Push each end of the clamps until they lock The thermal pad & SEC cartridge should not have a gap! SEC Cartridge with Heatsink (Top View) 20 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-D | P2B-D User Manual - Page 21
    with a thermal sensor built inside the CPU fan, or purchased separately the thermal sensor cables (ASUS P2T-Cable), you can connect the P2T-Cables to your motherboard's thermal sensor connectors. See the next page for information on ASUS Smart Thermal Solutions. ASUS P2B-D/P2B-DS User's Manual 21
  • Asus P2B-D | P2B-D User Manual - Page 22
    ASUS Smart Thermal Solutions ASUS provides two smart solutions to Slot 1 CPU thermal problems: the ASUS Smart Fan or ASUS S-P2FAN and the ASUS P2T-Cable. ASUS S-P2FAN Thermal Sensor The optional ASUS Smart Fan or Cable CPU Fan Cable Rock Arm ASUS S-P2FAN is a CPU ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-D | P2B-D User Manual - Page 23
    power supply with thermal monitoring. Recommended Heatsinks for Slot 1 Processors The recommended heatsinks for the Slot 1 processors are those with three-pin fans, such as the ASUS Smart Fan, that can be connected to the motherboard's CPU from "Unlock" to "Lock." ASUS P2B-D/P2B-DS User's Manual 23
  • Asus P2B-D | P2B-D User Manual - Page 24
    cover. 6. Set up the BIOS if necessary (such as IRQ xx Used By ISA: Yes in PNP AND PCI SETUP) 7. Install the necessary software drivers for your expansion card. Assigning your computer will experience problems when those two devices are in use at the same time. 24 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-D | P2B-D User Manual - Page 25
    Graphics Port This motherboard provides an accelerated graphics port (AGP) slot to support a new generation of graphics cards with ultra-high memory bandwidth, such as the ASUS AGP-V2740 3D Multimedia Accelerator. 1 R 1 P2B-D/DS Accelerated Graphics Port (AGP) ASUS P2B-D/P2B-DS User's Manual 25
  • Asus P2B-D | P2B-D User Manual - Page 26
    power sources. Placing jumper caps over these will cause damage to your motherboard ) keyboard plugs. You may use a DIN to mini DIN adapter on standard AT keyboards. PS/2 Keyboard (6-pin Female) 2. BIOS Features Setup of the BIOS SOFTWARE. PS/2 Mouse (6-pin Female) 26 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-D | P2B-D User Manual - Page 27
    Onboard Parallel Port" in Chipset Features Setup of the BIOS SOFTWARE. NOTE: Serial printers must be connected to Disk Drive Connector (34-1pin FLOPPY) This connector supports the provided floppy disk drive ribbon cable. After P2B-D/DS Floppy Disk Drive Connector ASUS P2B-D/P2B-DS User's Manual 27
  • Asus P2B-D | P2B-D User Manual - Page 28
    1pin IDE) These connectors support the provided IDE hard SCSI drive and select the boot disk through BIOS Features Setup. NOTE: Orient the red stripe on the IDE ribbon cable to Pin 1 Primary IDE Connector PIN 1 P2B-D/DS IDE Connectors Secondary IDE Connector 28 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-D | P2B-D User Manual - Page 29
    +12V Ground CPU Fan Power Power Supply Fan Power Chassis Fan Power 1 R 1 P2B-D/DS 12Volt Cooling Fan Power NOTE: If you are installing two processors, you may connect the fan from the second heatsink to either the power supply or chassis fan connector. ASUS P2B-D/P2B-DS User's Manual 29
  • Asus P2B-D | P2B-D User Manual - Page 30
    ATX power supply can supply at least 10mAmp on the 5-volt standby lead (+5VSB). You may experience difficulty in powering on your system if your power supply cannot support the load. For Wake on LAN support, your ATX power supply must supply at least 720mAmp. 30 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-D | P2B-D User Manual - Page 31
    . This occurs when the side panel is opened or drive bay doors are opened. This function is available only with the optional hardware monitor installed. 1 R 1 1 R 1 P2B-D/DS Chassis Open Alarm Lead +5VSB Chassis Signal (High Active) Ground ASUS P2B-D/P2B-DS User's Manual 31
  • Asus P2B-D | P2B-D User Manual - Page 32
    Lock Power LED Speaker Connector +5 V PLED KEYLOCK Ground +5V Ground Ground SPKR +5 V MSG.LED ExtSMI# Ground PWR_SW +3VSB ResetCon Ground MSG LED Reset SW SMI Lead ATX Power Switch* P2B-D/DS System Panel Connections * Requires an ATX power supply. 32 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-D | P2B-D User Manual - Page 33
    Wide SCSI Connector Single-Ended Devices CD-ROM Scanner Tape Ultra2 Devices Disk 1 Disk 2 Disk 3 P2B-D/DS Mixed Ultra2 and Single-Ended Device Configuration Ultra2 SCSI uses the same connectors and cables as UltraSCSI, so upgrading is easy and cost-effective. ASUS P2B-D/P2B-DS User's Manual 33
  • Asus P2B-D | P2B-D User Manual - Page 34
    -master bus, that is, multiple chips can be connected to the same bus and each one can act as a master by initiating data transfer. SMB 1 R 1 P2B-D/DS SMBus Connector III. INST ALLATION Connectors 34 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-D | P2B-D User Manual - Page 35
    click Shut down the computer?. The system will give three quick beeps after about 30 seconds and then power off after Windows shuts down. NOTE: The message "You can now safely turn off your computer" will not appear when shutting down with ATX power supplies. ASUS P2B-D/P2B-DS User's Manual 35
  • Asus P2B-D | P2B-D User Manual - Page 36
    save AFLASH.EXE and the BIOS file to a bootable floppy disk. To save your current BIOS, type [1] at the Main Menu and then press . The Save Current BIOS To File screen appears. Type a filename and the path, for example, A:\440BX-1 and then press . 36 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-D | P2B-D User Manual - Page 37
    BIOS update, press Y to start the update. The utility starts to program the new BIOS information into the flash ROM. When the programming is finished, Flashed Successfully will be displayed. Follow the onscreen instructions to continue. IV. BIOS Flash Memory Writer ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-D | P2B-D User Manual - Page 38
    the new BIOS file, exit the Flash Memory Writer utility and then reboot. 7. Hold down to enter BIOS setup. You must select "Setup Default" to effect the new BIOS, after which you may set the other items from the Main Menu. IV. BIOS Updating BIOS 38 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-D | P2B-D User Manual - Page 39
    BIOS SOFTWARE 6. BIOS Setup The motherboard supports two programmable Flash ROM chips: 5-Volt and 12Volt. Either of these memory chips can be updated when BIOS upgrades are released. Use the Flash Memory Writer utility to download the new BIOS Power BIOS BIOS Setup ASUS P2B-D/P2B-DS User's Manual 39
  • Asus P2B-D | P2B-D User Manual - Page 40
    memory on the board gets lost or damaged, or if you change your system hardware configuration, you will need to respecify the configuration values. The configuration values usually get lost or corrupted when the power of the onboard CMOS battery weakens. IV. BIOS 40 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-D | P2B-D User Manual - Page 41
    Block Addressing (LBA) to allow larger IDE hard disks; set it to Large for drives over 528MB that do not support LBA. Large type of drive can only be used with MS-DOS and is very uncommon. Most IDE drives over 528MB support the LBA mode. IV. BIOS Standard CMOS ASUS P2B-D/P2B-DS User's Manual 41
  • Asus P2B-D | P2B-D User Manual - Page 42
    change your hard disks (with the power off) and then power on without having to reconfigure your hard disk type. If you use older hard disks that do not support this feature, then you must configure , All,But Diskette; and All,But Disk/Key. IV. BIOS Standard CMOS 42 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-D | P2B-D User Manual - Page 43
    Some entries are required by the motherboard's design to remain in their default settings. IV. BIOS BIOS Features A section at the lower right to each function heading. Details of BIOS Features Setup CPU Internal Core Speed (Manual) This function is reserved for ASUS P2B-D/P2B-DS User's Manual 43
  • Asus P2B-D | P2B-D User Manual - Page 44
    the CPU level 2 cache. BIOS Update (Enabled) This functions as an update loader integrated into the BIOS to supply the processor with the required data. The BIOS will load the update on used in this feature may decrease system performance. IV. BIOS BIOS Features 44 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-D | P2B-D User Manual - Page 45
    Disabled. MPS 1.4 Support (Disabled) This is problem. Otherwise leave this on the setup default setting of Disabled. Video ROM BIOS Shadow (Enabled) This field allows you to change the video BIOS ROM reduces the memory available between 640K and BIOS BIOS Features ASUS P2B-D/P2B-DS User's Manual 45
  • Asus P2B-D | P2B-D User Manual - Page 46
    . IV. BIOS Chipset Features the module, such as memory type, size, speed, CPU read cycles. Leave on default setting. Snoop Ahead (Enabled) Enabled will allow PCI streaming. Leave on default setting. Host Bus Fast Data Ready (Disabled) Leave on default setting. 46 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-D | P2B-D User Manual - Page 47
    BIOS SOFTWARE 16-bit I/O Recovery Time (1 BUSCLK) / 8-bit I/O Recovery Time (1 BUSCLK) Timing for 16-bit and 8-bit ISA cards, respectively. Leave on default setting. Graphics Aperture Size (64MB) Memory connect the floppy disk drives, set this field to Disabled. ASUS P2B-D/P2B-DS User's Manual 47
  • Asus P2B-D | P2B-D User Manual - Page 48
    second serial UART to support the infrared module connector on the motherboard. If your system SCSI drives). IDE Ultra DMA Mode (Auto) This field autodetects Ultra DMA capability (for improved transfer speeds and data integrity) for compatible BIOS Chipset Features 48 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-D | P2B-D User Manual - Page 49
    "Power" will appear in the "Control Panel." Choose "Advanced" in the Power Management Field. Video Off Option (Suspend -> Off ) This field determines when to activate the video off feature for monitor power management. The settings are Always On and Suspend -> Off. ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-D | P2B-D User Manual - Page 50
    4 seconds. Suspend allows the button to have a dual function where pressing less than 4 seconds will place the system in sleep mode. Regardless of the setting, holding the ATX switch for more than 4 seconds will power off the system. IV. BIOS Power Management 50 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-D | P2B-D User Manual - Page 51
    . NOTE: If any of the monitored items are out of range, an error message will appear: "Hardware Monitor found an error, enter POWER MANAGEMENT SETUP for details". You will then be prompted to "Press F1 to continue, DEL to enter SETUP". IV. BIOS Power Management ASUS P2B-D/P2B-DS User's Manual 51
  • Asus P2B-D | P2B-D User Manual - Page 52
    instead of using the BIOS. Thus interrupts may be ISA card that requires a unique IRQ, and you are not using an ICU, you must set the field for that IRQ to Yes. For example: If you install a legacy ISA card that requires IRQ 10, then set IRQ10 Used By ISA to Yes... 52 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-D | P2B-D User Manual - Page 53
    ISA card that uses any memory onboard SCSI chipset to support BIOS Sequence (PCI/AGP) You can select the search order for your VGA card(s). PCI/AGP will detect PCI VGA cards before AGP, and AGP/PCI will detect AGP cards before PCI VGA. IV. BIOS Plug & Play / PCI ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-D | P2B-D User Manual - Page 54
    troubleshooting default values permanently stored in the BIOS ROM. These default settings are non-optimal and disable all high performance features. To load these default settings, highlight "Load BIOS on the Standard CMOS Setup screen. IV. BIOS Load Defaults 54 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-D | P2B-D User Manual - Page 55
    screen automatically reverts to the main screen. IV. BIOS Passwords To implement password protection, specify in the "Security Option" field of the BIOS Features Setup screen when the system will prompt for ) in section III for procedures on clearing the CMOS. ASUS P2B-D/P2B-DS User's Manual 55
  • Asus P2B-D | P2B-D User Manual - Page 56
    Standard CMOS Setup screen. IV. BIOS Hard Disk Detect Up to four the drive letter on the screen. The process then proceeds to the next drive letter. auto-detecting a hard disk that supports the LBA mode, three lines will problem if the drive is new and empty. 56 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-D | P2B-D User Manual - Page 57
    . BIOS Save & Exit Exit Without Saving Select this option to exit the Setup utility without saving the modifications you specify during the current session. To exit without saving, highlight the "Exit Without Saving" option on the main screen and then press . ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-D | P2B-D User Manual - Page 58
    Info displays information on your motherboard, BIOS, and CPU. Browse This CD allows you to see the contents of the ASUS Support CD. User's Manual displays the motherboard user's manual in pdf format. Technical Support Form opens up a blank Technical Support Request Form for you to fill and
  • Asus P2B-D | P2B-D User Manual - Page 59
    download a BIOS image file. Driver installs the necessary components to work properly. NOTE: This is not available if your motherboard does not have onboard VGA, audio, and SCSI. Other allows you to install Adobe Acrobat Reader and/or Trend PC Cillin, a virus protection software. ASUS P2B-D/P2B-DS
  • Asus P2B-D | P2B-D User Manual - Page 60
    is located in the DMI folder under the root directory of the support CD Flash BIOS Utility (DOS Version) provides information on the Flash BIOS utility (AFLASH.EXE). Choose "Restart in MS-DOS mode" and then type "aflash" from the AFLASH folder on the support CD. 60 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-D | P2B-D User Manual - Page 61
    V. SOFTWARE SETUP Click here to bring up ASUS Contact Information. ASUS Contact Information V. S/W SETUP Contact Info Submenu ASUS P2B-D/P2B-DS User's Manual 61
  • Asus P2B-D | P2B-D User Manual - Page 62
    CONFIG.SYS files. 1. In Windows, copy DMICFG2.EXE to your hard disk drive. 2. Restart your computer and press + during bootup to enter safe mode command prompt. 3. Go to the directory containing DMICFG2.EXE. 4. Type DMICFG2 and press to run. 62 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-D | P2B-D User Manual - Page 63
    the BIOS Characteristics field BIOS Auto Detect *** appears on the right for each menu item on the left side that has been auto detected by the system BIOS. A heading, *** User Modified *** will appear on the right for menu items that have been modified by the user. ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-D | P2B-D User Manual - Page 64
    to memory by entering a drive and path and file name here. Load BIOS Defaults You can load the BIOS defaults from a MIFD file and can clear all user modified and added data. You must reboot your computer in order for the defaults to be saved back into the Flash BIOS. 64 ASUS P2B-D/P2B-DS User
  • Asus P2B-D | P2B-D User Manual - Page 65
    the option of reassigning bad blocks so that data will not be written to them. This utility is only necessary if you suspect that your SCSI disk drive has a problem. ASUS P2B-D/P2B-DS User's Manual 65
  • Asus P2B-D | P2B-D User Manual - Page 66
    VII. ADAPTEC SCSI SELECT (This page was intentionally left blank.) VII. SCSI SELECT 66 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-D | P2B-D User Manual - Page 67
    Windows®3.1x, or Windows for Workgroups3.1x. Note: TheADAPTEC EZ-SCSI UTILITY does not provide drivers for Windows®95 and WindowsNT™. Quick Start Instructions First, install SCSI devices floppy is A: drive). Then press . 4 Follow the onscreen instructions. ASUS P2B-D/P2B-DS User's Manual 67
  • Asus P2B-D | P2B-D User Manual - Page 68
    Hardware Wizard. If Windows does not detect the host adapter, run the Add New Hardware Wizard again. This time, select No on the second screen of the wizard, then select SCSI controllers on the next screen. Select the name of your host adapter when it appears. 68 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-D | P2B-D User Manual - Page 69
    adapter according to the instructions in the hardware documentation. 5 Turn the computer ON. If the new host adapter supports Plug and Play, Windows will install and configure it automatically. Otherwise, run Add New Hardware to make sure the new driver is loaded. ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-D | P2B-D User Manual - Page 70
    do not need to use these real mode ASPI drivers, because the new Windows miniport drivers support most SCSI host adapters and SCSI devices. However, you need to load the drivers (including mscdex, if you have a CDROM drive drive letter after the hard disk drives. 70 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-D | P2B-D User Manual - Page 71
    of host adapter is installed in your computer and automatically configures your system with the correct ASPI manager. To learn more about these ASPI managers, including their command line option information, see the Adaptec EZSCSI Online Reference, a Windows Help application. ASUS P2B-D/P2B-DS User
  • Asus P2B-D | P2B-D User Manual - Page 72
    adapter and that they are powered. Then follow these steps: 1. Change to the directory where scsifmt.exe is located (usually c:\scsi), type scsifmt at the DOS prompt, and press Enter. NOTE: If you are formatting a SCSI disk device that supports more than one LUN (for example, Iomega's Bernoulli dual
  • Asus P2B-D | P2B-D User Manual - Page 73
    only, not from the Windows MSDOS prompt. Before you run it, be sure the disk devices you want to format and partition are connected to the host adapter and that they are powered. Then follow these steps per track, and one cylinder per 8 MB of available capacity. ASUS P2B-D/P2B-DS User's Manual 73
  • Asus P2B-D | P2B-D User Manual - Page 74
    to 2Gigabytes are supported. 5. When the SCSI Device to Partition window. If you want to partition a different disk device, select the device from the list and repeat the earlier steps. 7. To quit afdisk, press Esc and select Yes to confirm that you want to quit. 74 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-D | P2B-D User Manual - Page 75
    the Wake on LAN (WOL) output signal to the motherboard's WOL_CON in order to utilize the wake on LAN feature of the motherboard. Connect the LAN activity output signal (LAN_LED) to the system cabinet' front panel LAN_LED in order to display the LAN data activity. ASUS P2B-D/P2B-DS User's Manual 75
  • Asus P2B-D | P2B-D User Manual - Page 76
    ? A: To enable Wake-On-LAN function, your system requires Ethernet LAN adapter card that can activate Wake-On-LAN function, a client with Wake-On-LAN capability, and software such as LDCM Rev. 3.10 or up that can trigger wake-up frame. IX. ASUS LAN Card Features 76 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-D | P2B-D User Manual - Page 77
    OTHER ASUS PRODUCTS ® Barebone Servers Pentium® III PC100 ECC Ultra2 SCSI 5.25" Pentium® II Max. Memory Onboard Fixed Storage Support (GB) (Channels) Devices AP100 1 1 1 3 AP200 2 1 1 3 AP2000 2 1 1 4 AP2500 2 1 1 4 AP3000 2 Xeon™ 2 2 4 AP6000 2 1 1 4 AP7500 2 1
  • Asus P2B-D | P2B-D User Manual - Page 78
    for easy heat dissipation • 350W redundant power supply ASUS PCI-DA2100/2200 Series SCSI RAID Card • PCI-DA2100 series support 4x86 DX4-100 processor • PCI-DA2200 series support 5x86-133 processor • One 72-pin SIMM socket supports up to 128MB cache memory • RAID levels 0, 0+1, 3, 5, non-RAID • PCI
  • Asus P2B-D | P2B-D User Manual - Page 79
    OTHER ASUS PRODUCTS ® Goes Mobile! M8300/8200 Series Thin & Light Convertible Notebook PC 13.3" or 12.1" TFT Color Display 233/266/300/333/366/400+MHz F7400
  • Asus P2B-D | P2B-D User Manual - Page 80
    ASUS PRODUCTS ®Ultra-Fast CD-ROM • Supports high speed CD-Audio playback • Supports high speed digital audio extraction • Supports UltraDMA/33 transfer mode • Compatible with all CD formats • Supports multi-read function (CD-R/CD-RW) Drive Interface Type: Disc Formats: Disk Size: OS Compatibility
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
®
P2B-D/P2B-DS
Dual Pentium
®
III / II Motherboard
USER’S MANUAL
Special Features
•
P2B-DS
•
Adaptec 7890 SCSI Chipset
•
Adaptec 3860 SCSI Transceiver